USB: serial: Updated support for ICOM devices
Subsystems (2)
PATCH 1/1 USB: serial: Updated support for ICOM devices
I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited.
I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are.
Signed-off-by Pieter Maes <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 12 +++++++++++- drivers/usb/serial/ftdi_sio_ids.h | 22 +++++++++++++++++----- 2 files changed, 28 insertions(+), 6 deletions(-)
drivers/usb/serial/ftdi_sio.c +11 -1
@@ -676,7 +676,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, - { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
drivers/usb/serial/ftdi_sio_ids.h +17 -5
@@ -569,11 +569,23 @@#define OCT_US101_PID 0x0421/* OCT US101 USB to RS-232 */ /* -* Icom ID-1 digital transceiver -*/ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 +* Definitions for Icom Inc. devices +*/ +#define ICOM_VID 0x0C26/* Icom vendor ID */ +/* Note: ID-1 is a communications tranceiver for HAM-radio operators */ +#define ICOM_ID_1_PID 0x0004/* ID-1 USB to RS-232 */ +/* Note: OPC is an Optional cable to connect an Icom Tranceiver */ +#define ICOM_OPC_U_UC_PID 0x0018/* OPC-478UC, OPC-1122U cloning cable */ +/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ +#define ICOM_ID_RP2C1_PID 0x0009/* ID-RP2C Asset 1 to RS-232 */ +#define ICOM_ID_RP2C2_PID 0x000A/* ID-RP2C Asset 2 to RS-232 */ +#define ICOM_ID_RP2D_PID 0x000B/* ID-RP2D configuration port*/ +#define ICOM_ID_RP2VT_PID 0x000C/* ID-RP2V Transmit config port */ +#define ICOM_ID_RP2VR_PID 0x000D/* ID-RP2V Receive config port */ +#define ICOM_ID_RP4KVT_PID 0x0010/* ID-RP4000V Transmit config port */ +#define ICOM_ID_RP4KVR_PID 0x0011/* ID-RP4000V Receive config port */ +#define ICOM_ID_RP2KVT_PID 0x0012/* ID-RP2000V Transmit config port */ +#define ICOM_ID_RP2KVR_PID 0x0013/* ID-RP2000V Receive config port */ /* * GN Otometrics (http://www.otometrics.com)
Signature · 1 line
1.7.1