usb: Add streams support to the gadget framework.

index 8a83248..e0b0c67 100644
@@ -63,13 +63,16 @@ static int
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
-	struct usb_endpoint_descriptor	*desc
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
 )
 {
 	u8		type;
 	const char	*tmp;
 	u16		max;
 
+	int		num_req_streams = 0;
+
 	/* endpoint already claimed? */
 	if (NULL != ep->driver_data)
 		return 0;

@@ -128,6 +131,23 @@ ep_matches (
 		}
 	}
 
+
+	/*
+	 * Get the number of required streams from the EP companion
+	 * descriptor and see if the EP matches it
+	 */
+	if (usb_endpoint_xfer_bulk(desc)) {
+		if (ep_comp) {
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->num_supported_strms)
+				return 0;
+			/* Update the ep_comp descriptor if needed */
+			if (num_req_streams != ep->num_supported_strms)
+				ep_comp->bmAttributes = ep->num_supported_strms;
+		}
+
+	}
+
 	/* endpoint maxpacket size is an input parameter, except for bulk
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.

@@ -200,38 +220,56 @@ find_ep (struct usb_gadget *gadget, const char *name)
 }
 
 /**
- * usb_ep_autoconfig - choose an endpoint matching the descriptor
+ * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
+ * descriptor and ep companion descriptor
  * @gadget: The device to which the endpoint must belong.
  * @desc: Endpoint descriptor, with endpoint direction and transfer mode
- *	initialized.  For periodic transfers, the maximum packet
- *	size must also be initialized.  This is modified on success.
+ *    initialized.  For periodic transfers, the maximum packet
+ *    size must also be initialized.  This is modified on
+ *    success.
+ * @ep_comp: Endpoint companion descriptor, with the required
+ *    number of streams. Will be modified when the chosen EP
+ *    supports a different number of streams.
  *
- * By choosing an endpoint to use with the specified descriptor, this
- * routine simplifies writing gadget drivers that work with multiple
- * USB device controllers.  The endpoint would be passed later to
- * usb_ep_enable(), along with some descriptor.
+ * This routine replaces the usb_ep_autoconfig when needed
+ * superspeed enhancments. If such enhancemnets are required,
+ * the FD should call usb_ep_autoconfig_ss directly and provide
+ * the additional ep_comp parameter.
+ *
+ * By choosing an endpoint to use with the specified descriptor,
+ * this routine simplifies writing gadget drivers that work with
+ * multiple USB device controllers.  The endpoint would be
+ * passed later to usb_ep_enable(), along with some descriptor.
  *
  * That second descriptor won't always be the same as the first one.
  * For example, isochronous endpoints can be autoconfigured for high
  * bandwidth, and then used in several lower bandwidth altsettings.
  * Also, high and full speed descriptors will be different.
  *
- * Be sure to examine and test the results of autoconfiguration on your
- * hardware.  This code may not make the best choices about how to use the
- * USB controller, and it can't know all the restrictions that may apply.
- * Some combinations of driver and hardware won't be able to autoconfigure.
+ * To allow controller special algorithms, we added a new gadget
+ * op for assigning an ep.
+ *
+ * Be sure to examine and test the results of autoconfiguration
+ * on your hardware.  This code may not make the best choices
+ * about how to use the USB controller, and it can't know all
+ * the restrictions that may apply. Some combinations of driver
+ * and hardware won't be able to autoconfigure.
  *
  * On success, this returns an un-claimed usb_ep, and modifies the endpoint
  * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
- * is initialized as if the endpoint were used at full speed.  To prevent
- * the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * is initialized as if the endpoint were used at full speed and
+ * the bmAttribute field in the ep companion descriptor is
+ * updated with the assigned number of streams if it is
+ * different from the original value. To prevent the endpoint
+ * from being returned by a later autoconfig call, claim it by
+ * assigning ep->driver_data to some non-null value.
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep *usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig_ss(
 	struct usb_gadget		*gadget,
-	struct usb_endpoint_descriptor	*desc
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
 )
 {
 	struct usb_ep	*ep;

@@ -245,23 +283,24 @@ struct usb_ep *usb_ep_autoconfig (
 	if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
 		/* ep-e, ep-f are PIO with only 64 byte fifos */
 		ep = find_ep (gadget, "ep-e");
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 		ep = find_ep (gadget, "ep-f");
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 
 	} else if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
-			ep = find_ep (gadget, "ep3-bulk");
-			if (ep && ep_matches (gadget, ep, desc))
+			ep = find_ep(gadget, "ep3-bulk");
+			if (ep && ep_matches(gadget, ep, desc, ep_comp))
 				return ep;
 		} else if (USB_ENDPOINT_XFER_BULK == type
 				&& (USB_DIR_IN & desc->bEndpointAddress)) {
 			/* DMA may be available */
-			ep = find_ep (gadget, "ep2-bulk");
-			if (ep && ep_matches (gadget, ep, desc))
+			ep = find_ep(gadget, "ep2-bulk");
+			if (ep && ep_matches(gadget, ep, desc,
+					      ep_comp))
 				return ep;
 		}
 

@@ -280,14 +319,14 @@ struct usb_ep *usb_ep_autoconfig (
 				ep = find_ep(gadget, "ep2out");
 		} else
 			ep = NULL;
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 #endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (ep_matches (gadget, ep, desc))
+		if (ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 	}
 

@@ -296,6 +335,46 @@ struct usb_ep *usb_ep_autoconfig (
 }
 
 /**
+ * usb_ep_autoconfig() - choose an endpoint matching the
+ * descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *	initialized.  For periodic transfers, the maximum packet
+ *	size must also be initialized.  This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers.  The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware.  This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed.  To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	return usb_ep_autoconfig_ss(gadget, desc, NULL);
+}
+
+
+/**
  * usb_ep_autoconfig_reset - reset endpoint autoconfig state
  * @gadget: device for which autoconfig state will be reset
  *

index 006412c..b7654f5 100644
@@ -34,6 +34,8 @@ struct usb_ep;
  *     by adding a zero length packet as needed;
  * @short_not_ok: When reading data, makes short packets be
  *     treated as errors (queue stops advancing till cleanup).
+ * @reserved: reserved bits
+ * @stream_id: the stream id
  * @complete: Function called when request completes, so this request and
  *	its buffer may be re-used.  The function will always be called with
  *	interrupts disabled, and it must not sleep.

@@ -84,6 +86,9 @@ struct usb_request {
 	unsigned		no_interrupt:1;
 	unsigned		zero:1;
 	unsigned		short_not_ok:1;
+	unsigned		reserved:13;
+
+	unsigned		stream_id:16;
 
 	void			(*complete)(struct usb_ep *ep,
 					struct usb_request *req);

@@ -133,6 +138,8 @@ struct usb_ep_ops {
  *      the endpoint descriptor used to configure the endpoint.
  * @driver_data:for use by the gadget driver.  all other fields are
  *	read-only to gadget drivers.
+ * @num_supported_strms:The number of maximum streams supported
+ *	by this EP
  *
  * the bus controller driver lists all the general purpose endpoints in
  * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,

@@ -145,6 +152,7 @@ struct usb_ep {
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
 	unsigned		maxpacket:16;
+	int			num_supported_strms;
 };
 
 /*-------------------------------------------------------------------------*/

@@ -892,6 +900,11 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v)
 extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
 			struct usb_endpoint_descriptor *) __devinit;
 
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *) __devinit;
+
 extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit;
 
 #endif /* __LINUX_USB_GADGET_H */