Skip to contentSkip to conversation

Boot command line support

RFC In review Jean-Christophe PLAGNIOL-VILLARD 2 participants 9 messages Jan 26, 2011 – Feb 7, 2014

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

HI,

as barebox is some times a second stage bootloader it could be intresting to pass some information

I'm currently working on two support
the atags for arm and the cmdline

The cmline could be static or dynamic
so it will be easy to customise a boot sequence and etc...

this first patch will just add static cmdline

later I'll send dynamic support and arm boot ABI

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#1 lore raw

PATCH 1/3 string: add skip_spaces support

need by parse_args for the command line parsing

---
 include/linux/string.h |    1 +
 lib/string.c           |   14 ++++++++++++++
 2 files changed, 15 insertions(+), 0 deletions(-)
include/linux/string.h +1 -0
index 62d743e..b4b48fb 100644
@@ -59,6 +59,7 @@ extern char * _strchr(const char *,int);
 #ifndef __HAVE_ARCH_STRRCHR
 extern char * _strrchr(const char *,int);
 #endif
+extern char * skip_spaces(const char *);
 #ifndef __HAVE_ARCH_STRSTR
 extern char * _strstr(const char *,const char *);
 #endif
lib/string.c +14 -0
index 77435aa..5ffb861 100644
@@ -214,6 +214,20 @@ char * _strrchr(const char * s, int c)
 #endif
 EXPORT_SYMBOL(_strrchr);
 
+/**
+ * skip_spaces - Removes leading whitespace from @str.
+ * @str: The string to be stripped.
+ *
+ * Returns a pointer to the first non-whitespace character in @str.
+ */
+char *skip_spaces(const char *str)
+{
+	while (isspace(*str))
+		++str;
+	return (char *)str;
+}
+EXPORT_SYMBOL(skip_spaces);
+
 #ifndef __HAVE_ARCH_STRLEN
 /**
  * strlen - Find the length of a string
Signature · 7 lines
1.7.2.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

PATCH 2/3 add command line boot support

In reply to Jean-Christophe PLAGNIOL-VILLARD

for now just support static boot command support

---
 arch/arm/lib/barebox.lds.S                |    4 +
 arch/blackfin/boards/ipe337/barebox.lds.S |    4 +
 arch/ppc/boards/pcm030/barebox.lds.S      |    4 +
 arch/sandbox/board/barebox.lds.S          |    4 +
 arch/sandbox/lib/barebox.lds.S            |    4 +
 arch/x86/lib/barebox.lds.S                |    9 ++-
 common/Kconfig                            |   11 ++
 common/Makefile                           |    1 +
 common/params.c                           |  158 +++++++++++++++++++++++++++++
 common/startup.c                          |   74 +++++++++++++-
 include/asm-generic/barebox.lds.h         |    2 +
 include/init.h                            |   28 +++++
 12 files changed, 301 insertions(+), 2 deletions(-)
 create mode 100644 common/params.c
arch/arm/lib/barebox.lds.S +4 -0
index cc74b2f..72d1306 100644
@@ -64,6 +64,10 @@ SECTIONS
 	.barebox_cmd : { BAREBOX_CMDS }
 	__barebox_cmd_end = .;
 
+	__setup_start = .;
+	.initsetup : { INIT_SETUP }
+	__setup_end = .;
+
 	__barebox_initcalls_start = .;
 	.barebox_initcalls : { INITCALLS }
 	__barebox_initcalls_end = .;
arch/blackfin/boards/ipe337/barebox.lds.S +4 -0
index 571eeb1..f2787e8 100644
@@ -75,6 +75,10 @@ SECTIONS
 	.barebox_initcalls : { INITCALLS }
 	___barebox_initcalls_end = .;
 
+	__setup_start = .;
+	.initsetup : { INIT_SETUP }
+	__setup_end = .;
+
 	___usymtab_start = .;
 	__usymtab : { BAREBOX_SYMS }
 	___usymtab_end = .;
arch/ppc/boards/pcm030/barebox.lds.S +4 -0
index 21bf4a7..4adf9fb 100644
@@ -107,6 +107,10 @@ SECTIONS
   __barebox_initcalls_end = .;
   __initcall_entries = (__barebox_initcalls_end - __barebox_initcalls_start) >> 2;
 
+  __setup_start = .;
+  .initsetup : { INIT_SETUP }
+  __setup_end = .;
+
   __usymtab_start = .;
   __usymtab : { BAREBOX_SYMS }
   __usymtab_end = .;
arch/sandbox/board/barebox.lds.S +4 -0
index 53e9f60..7dae3e9 100644
@@ -75,6 +75,10 @@ SECTIONS
   __barebox_initcalls : { INITCALLS }
   __barebox_initcalls_end = .;
   . = ALIGN(64);
+  __setup_start = .;
+  .initsetup : { INIT_SETUP }
+  __setup_end = .;
+  . = ALIGN(64);
   __barebox_cmd_start = .;
   __barebox_cmd : { BAREBOX_CMDS }
   __barebox_cmd_end = .;
arch/sandbox/lib/barebox.lds.S +4 -0
index 53e9f60..7dae3e9 100644
@@ -75,6 +75,10 @@ SECTIONS
   __barebox_initcalls : { INITCALLS }
   __barebox_initcalls_end = .;
   . = ALIGN(64);
+  __setup_start = .;
+  .initsetup : { INIT_SETUP }
+  __setup_end = .;
+  . = ALIGN(64);
   __barebox_cmd_start = .;
   __barebox_cmd : { BAREBOX_CMDS }
   __barebox_cmd_end = .;
arch/x86/lib/barebox.lds.S +8 -1
index e0919a6..1b275ad 100644
@@ -177,7 +177,14 @@ SECTIONS
 		. = ALIGN(4);
 	} > barebox
 
-	.__usymtab : AT ( LOADADDR(.barebox_initcalls) + SIZEOF (.barebox_initcalls) ) {
+	.initsetup : AT ( LOADADDR(.barebox_initcalls) + SIZEOF (.barebox_initcalls) ) {
+		__setup_start = .;
+		INIT_SETUP
+		__setup_end = .;
+		. = ALIGN(4);
+	} > barebox
+
+	.__usymtab : AT ( LOADADDR(.initsetup) + SIZEOF (.initsetup) ) {
 		__usymtab_start = .;
 		BAREBOX_SYMS
 		__usymtab_end = .;
common/Kconfig +11 -0
index 02bc67e..53a4230 100644
@@ -224,8 +224,19 @@ choice
 		bool "Simple parser"
 		help
 		  simple shell. No if/then, no return values from commands, no loops
+
 endchoice
 
+config BOOT_CMDLINE
+	bool "barebox boot command string"
+	help
+
+config CMDLINE
+	string "Default barebox command string"
+	depends on BOOT_CMDLINE
+	default ""
+	help
+
 config GLOB
 	bool
 	prompt "hush globbing support"
common/Makefile +1 -0
index 98c9d36..94816d5 100644
@@ -16,6 +16,7 @@ obj-$(CONFIG_DIGEST) += digest.o
 obj-y += env.o
 obj-$(CONFIG_CMD_BOOTM) += image.o
 obj-y += startup.o
+obj-$(CONFIG_BOOT_CMDLINE) += params.o
 obj-y += misc.o
 obj-y += memsize.o
 obj-$(CONFIG_MENU) += menu.o
common/params.c new file +158 -0

158 lines not on this page · raw message

common/startup.c +73 -1

101 lines not on this page · raw message

include/asm-generic/barebox.lds.h +2 -0
index fc141a4..18eab31 100644
@@ -7,6 +7,8 @@
 #define PRE_IMAGE
 #endif
 
+#define INIT_SETUP	KEEP(*(.init_setup))
+
 #define INITCALLS			\
 	KEEP(*(.initcall.0))			\
 	KEEP(*(.initcall.1))			\
include/init.h +28 -0
index 2f4fac1..53148fa 100644
@@ -44,6 +44,34 @@ typedef int (*initcall_t)(void);
  */
 #define __bare_init          __section(.text_bare_init.text)
 
+#define __initconst	__section(.rodata)
+
+struct obs_kernel_param {
+	const char *str;
+	int (*setup_func)(char *);
+};
+
+/*
+ * Only for really core code.  See moduleparam.h for the normal way.
+ *
+ * Force the alignment so the compiler doesn't space elements of the
+ * obs_kernel_param "array" too far apart in .init.setup.
+ */
+#define __setup_param(str, unique_id, fn)			\
+	static const char __setup_str_##unique_id[] __initconst	\
+		__aligned(1) = str; \
+	static struct obs_kernel_param __setup_##unique_id	\
+		__used __section(.init_setup)			\
+		__attribute__((aligned((sizeof(long)))))	\
+		= { __setup_str_##unique_id, fn}
+
+#define __setup(str, fn)					\
+	__setup_param(str, fn, fn)
+
+/* Called on module insert or kernel boot */
+extern int parse_args(const char *name,
+		      char *args,
+		      int (*unknown)(char *param, char *val));
 #endif
 
 #endif /* _INIT_H */
Signature · 7 lines
1.7.2.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw

Re: [PATCH 2/3] add command line boot support

Hi J,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

for now just support static boot command support

---
 arch/arm/lib/barebox.lds.S                |    4 +
 arch/blackfin/boards/ipe337/barebox.lds.S |    4 +
 arch/ppc/boards/pcm030/barebox.lds.S      |    4 +
 arch/sandbox/board/barebox.lds.S          |    4 +
 arch/sandbox/lib/barebox.lds.S            |    4 +
 arch/x86/lib/barebox.lds.S                |    9 ++-
 common/Kconfig                            |   11 ++
 common/Makefile                           |    1 +
 common/params.c                           |  158 +++++++++++++++++++++++++++++
 common/startup.c                          |   74 +++++++++++++-
 include/asm-generic/barebox.lds.h         |    2 +
 include/init.h                            |   28 +++++
 12 files changed, 301 insertions(+), 2 deletions(-)
 create mode 100644 common/params.c

Except for the inlined comments I'm generally ok with this patch. The more interesting part will be how the calling convention for barebox as a second stage loader is and how you preserve the registers used for commandline/atag passing during startup.

An idea which comes to my mind is that we could introduce a CONFIG_BAREBOX_SECOND_STAGE which switches to a completely different startup process. This startup process could then assume that sdram is already initialized and that we do not have to call board_init_lowlevel.
Another interesting thing is how will barebox behave if called as a second stage loader but without valid atags?

common/Kconfig choice · line 232

Quoted 5 lines
common/Kconfig +3 -0
+config BOOT_CMDLINE
+	bool "barebox boot command string"
+	help

This is useful if you intend to use barebox as a second stage bootloader and want to pass kernel like command line parameters to barebox. Otherwise say no here.

Quoted 47 lines
common/Kconfig +7 -0
+
+config CMDLINE
+	string "Default barebox command string"
+	depends on BOOT_CMDLINE
+	default ""
+	help
+
 config GLOB
 	bool
 	prompt "hush globbing support"
common/Makefile +1 -0
index 98c9d36..94816d5 100644
@@ -16,6 +16,7 @@ obj-$(CONFIG_DIGEST) += digest.o
 obj-y += env.o
 obj-$(CONFIG_CMD_BOOTM) += image.o
 obj-y += startup.o
+obj-$(CONFIG_BOOT_CMDLINE) += params.o
 obj-y += misc.o
 obj-y += memsize.o
 obj-$(CONFIG_MENU) += menu.o
common/params.c new file +19 -0
new file mode 100644
index 0000000..ea35401
@@ -0,0 +1,158 @@
+/* Helpers for initial module or kernel cmdline parsing
+   Copyright (C) 2001 Rusty Russell.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <malloc.h>
+#include <linux/kernel.h>

common/params.c line 29

Quoted 10 lines
common/params.c new file +10 -0
+#include <linux/string.h>
+#include <errno.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, a...)
+#endif

Please use the regular 'debug' function here.

common/params.c line 36

Quoted 7 lines
common/params.c new file +7 -0
+
+/* This just allows us to keep track of which parameters are kmalloced. */
+struct kmalloced_param {
+	struct list_head list;
+	char val[];
+};
+static LIST_HEAD(kmalloced_params);

This seems unused.

Quoted 293 lines
common/params.c new file +122 -0
+
+static inline char dash2underscore(char c)
+{
+	if (c == '-')
+		return '_';
+	return c;
+}
+
+static inline int parameq(const char *input, const char *paramname)
+{
+	unsigned int i;
+	for (i = 0; dash2underscore(input[i]) == paramname[i]; i++)
+		if (input[i] == '\0')
+			return 1;
+	return 0;
+}
+
+static int parse_one(char *param,
+		     char *val,
+		     int (*handle_unknown)(char *param, char *val))
+{
+	if (handle_unknown) {
+		DEBUGP("Unknown argument: calling %p\n", handle_unknown);
+		return handle_unknown(param, val);
+	}
+
+	DEBUGP("Unknown argument `%s'\n", param);
+	return -ENOENT;
+}
+
+/* You can use " around spaces, but can't escape ". */
+/* Hyphens and underscores equivalent in parameter names. */
+static char *next_arg(char *args, char **param, char **val)
+{
+	unsigned int i, equals = 0;
+	int in_quote = 0, quoted = 0;
+	char *next;
+
+	if (*args == '"') {
+		args++;
+		in_quote = 1;
+		quoted = 1;
+	}
+
+	for (i = 0; args[i]; i++) {
+		if (isspace(args[i]) && !in_quote)
+			break;
+		if (equals == 0) {
+			if (args[i] == '=')
+				equals = i;
+		}
+		if (args[i] == '"')
+			in_quote = !in_quote;
+	}
+
+	*param = args;
+	if (!equals)
+		*val = NULL;
+	else {
+		args[equals] = '\0';
+		*val = args + equals + 1;
+
+		/* Don't include quotes in value. */
+		if (**val == '"') {
+			(*val)++;
+			if (args[i-1] == '"')
+				args[i-1] = '\0';
+		}
+		if (quoted && args[i-1] == '"')
+			args[i-1] = '\0';
+	}
+
+	if (args[i]) {
+		args[i] = '\0';
+		next = args + i + 1;
+	} else
+		next = args + i;
+
+	/* Chew up trailing spaces. */
+	return skip_spaces(next);
+}
+
+/* Args looks like "foo=bar,bar2 baz=fuz wiz". */
+int parse_args(const char *name,
+	       char *args,
+	       int (*unknown)(char *param, char *val))
+{
+	char *param, *val;
+
+	DEBUGP("Parsing ARGS: %s\n", args);
+
+	/* Chew leading spaces */
+	args = skip_spaces(args);
+
+	while (*args) {
+		int ret;
+
+		args = next_arg(args, &param, &val);
+		ret = parse_one(param, val, unknown);
+		switch (ret) {
+		case -ENOENT:
+			printk(KERN_ERR "%s: Unknown parameter `%s'\n",
+			       name, param);
+			return ret;
+		case -ENOSPC:
+			printk(KERN_ERR
+			       "%s: `%s' too large for parameter `%s'\n",
+			       name, val ?: "", param);
+			return ret;
+		case 0:
+			break;
+		default:
+			printk(KERN_ERR
+			       "%s: `%s' invalid for parameter `%s'\n",
+			       name, val ?: "", param);
+			return ret;
+		}
+	}
+
+	/* All parsed OK. */
+	return 0;
+}
common/startup.c +73 -1
index aa76cb7..98b4aab 100644
@@ -41,6 +41,7 @@
 #include <reloc.h>
 #include <asm-generic/memory_layout.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 
 extern initcall_t __barebox_initcalls_start[], __barebox_early_initcalls_end[],
 		  __barebox_initcalls_end[];
@@ -103,6 +104,15 @@ static int register_default_env(void)
 device_initcall(register_default_env);
 #endif
 
+#ifdef CONFIG_BOOT_CMDLINE
+static int __init bootmode(char *mode)
+{
+	printf("boot=%s\n", mode);
+	return 0;
+}
+__setup("boot=", bootmode);
+#endif
+
 static int mount_root(void)
 {
 	mount("none", "ramfs", "/");
@@ -112,6 +122,67 @@ static int mount_root(void)
 }
 fs_initcall(mount_root);
 
+#ifdef CONFIG_BOOT_CMDLINE
+extern const struct obs_kernel_param __setup_start[], __setup_end[];
+
+static int __init obsolete_checksetup(char *line)
+{
+	const struct obs_kernel_param *p;
+
+	p = __setup_start;
+	do {
+		int n = strlen(p->str);
+		if (!strncmp(line, p->str, n)) {
+			if (!p->setup_func) {
+				printk(KERN_WARNING "Parameter %s is obsolete,"
+				       " ignored\n", p->str);
+				return 1;
+			} else if (p->setup_func(line + n))
+				return 1;
+		}
+		p++;
+	} while (p < __setup_end);
+
+	return 0;
+}
+
+/*
+ * Unknown boot options get handed to init, unless they look like
+ * unused parameters (modprobe will find them in /proc/cmdline).
+ */
+static int __init unknown_bootoption(char *param, char *val)
+{
+	/* Change NUL term back to "=", to make "param" the whole string. */
+	if (val) {
+		/* param=val or param="val"? */
+		if (val == param+strlen(param)+1)
+			val[-1] = '=';
+		else if (val == param+strlen(param)+2) {
+			val[-2] = '=';
+			memmove(val-1, val, strlen(val)+1);
+			val--;
+		} else
+			BUG();
+	}
+
+	/* Handle obsolete-style parameters */
+	obsolete_checksetup(param);
+	return 0;
+}
+
+void __init parse_param(void)
+{
+	static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
+
+	strlcpy(tmp_cmdline, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+	parse_args("Booting Barebox", tmp_cmdline, unknown_bootoption);
+}
+#else
+static void inline parse_param(void)
+{
+}
+#endif
+
 void start_barebox (void)
 {
 	initcall_t *initcall;
@@ -128,6 +199,8 @@ void start_barebox (void)
 	init_data_ptr = &__early_init_data_begin;
 #endif /* CONFIG_HAS_EARLY_INIT */
 
+	parse_param();
+
 	for (initcall = __barebox_initcalls_start;
 			initcall < __barebox_initcalls_end; initcall++) {
 		PUTHEX_LL(*initcall);
@@ -180,4 +253,3 @@ void shutdown_barebox(void)
 	arch_shutdown();
 #endif
 }
-
include/asm-generic/barebox.lds.h +2 -0
index fc141a4..18eab31 100644
@@ -7,6 +7,8 @@
 #define PRE_IMAGE
 #endif
 
+#define INIT_SETUP	KEEP(*(.init_setup))
+
 #define INITCALLS			\
 	KEEP(*(.initcall.0))			\
 	KEEP(*(.initcall.1))			\
include/init.h +28 -0
index 2f4fac1..53148fa 100644
@@ -44,6 +44,34 @@ typedef int (*initcall_t)(void);
  */
 #define __bare_init          __section(.text_bare_init.text)
 
+#define __initconst	__section(.rodata)
+
+struct obs_kernel_param {
+	const char *str;
+	int (*setup_func)(char *);
+};
+
+/*
+ * Only for really core code.  See moduleparam.h for the normal way.
+ *
+ * Force the alignment so the compiler doesn't space elements of the
+ * obs_kernel_param "array" too far apart in .init.setup.
+ */
+#define __setup_param(str, unique_id, fn)			\
+	static const char __setup_str_##unique_id[] __initconst	\
+		__aligned(1) = str; \
+	static struct obs_kernel_param __setup_##unique_id	\
+		__used __section(.init_setup)			\
+		__attribute__((aligned((sizeof(long)))))	\
+		= { __setup_str_##unique_id, fn}
+
+#define __setup(str, fn)					\
+	__setup_param(str, fn, fn)
+
+/* Called on module insert or kernel boot */
+extern int parse_args(const char *name,
+		      char *args,
+		      int (*unknown)(char *param, char *val));
 #endif
 
 #endif /* _INIT_H */
Signature · 7 lines
1.7.2.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#4 lore raw

Re: [PATCH 2/3] add command line boot support

Hi Sascha,

Quoted 22 lines · Sascha Hauer

Hi J,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

for now just support static boot command support

---
 arch/arm/lib/barebox.lds.S                |    4 +
 arch/blackfin/boards/ipe337/barebox.lds.S |    4 +
 arch/ppc/boards/pcm030/barebox.lds.S      |    4 +
 arch/sandbox/board/barebox.lds.S          |    4 +
 arch/sandbox/lib/barebox.lds.S            |    4 +
 arch/x86/lib/barebox.lds.S                |    9 ++-
 common/Kconfig                            |   11 ++
 common/Makefile                           |    1 +
 common/params.c                           |  158 +++++++++++++++++++++++++++++
 common/startup.c                          |   74 +++++++++++++-
 include/asm-generic/barebox.lds.h         |    2 +
 include/init.h                            |   28 +++++
 12 files changed, 301 insertions(+), 2 deletions(-)
 create mode 100644 common/params.c
Quoted 4 lines

Except for the inlined comments I'm generally ok with this patch. The more interesting part will be how the calling convention for barebox as a second stage loader is and how you preserve the registers used for commandline/atag passing during startup.

I take a look and no need to do something special we just have to put the data in the .data section as we will supposed to be call from memmory directly evenif we may ned to relocate our self

Quoted 6 lines

An idea which comes to my mind is that we could introduce a CONFIG_BAREBOX_SECOND_STAGE which switches to a completely different startup process. This startup process could then assume that sdram is already initialized and that we do not have to call board_init_lowlevel.

I get in mind to keep it maybe as we can run the lowlevel init from cache as a peekpoke table to reconfigure the board if needed

Quoted 2 lines

Another interesting thing is how will barebox behave if called as a second stage loader but without valid atags?

I think to use in this case the default config and let the boards to get a callback to overwrite it
I'll try to push patch soon to show the solution
I get in mind to maybe use the device tree also not sure yet

Quoted 10 lines

common/Kconfig choice · line 232

Quoted 6 lines
common/Kconfig +3 -0
+config BOOT_CMDLINE
+	bool "barebox boot command string"
+	help

This is useful if you intend to use barebox as a second stage bootloader and want to pass kernel like command line parameters to barebox. Otherwise say no here.

as you can have built_in cmdline you can use it also as a first stage

Quoted 23 lines
Quoted 23 lines
(quoted diff) +22 -0
+
+config CMDLINE
+	string "Default barebox command string"
+	depends on BOOT_CMDLINE
+	default ""
+	help
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <malloc.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <errno.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
Quoted 8 lines

common/params.c line 29

Quoted 6 lines
common/params.c new file +6 -0
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, a...)
+#endif

Please use the regular 'debug' function here.

ok

Quoted 10 lines

common/params.c line 36

Quoted 8 lines
common/params.c new file +7 -0
+
+/* This just allows us to keep track of which parameters are kmalloced. */
+struct kmalloced_param {
+	struct list_head list;
+	char val[];
+};
+static LIST_HEAD(kmalloced_params);

This seems unused.

yeah forget to remove it

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#5 lore raw

Re: [PATCH 2/3] add command line boot support

Quoted 25 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi Sascha,

Quoted 22 lines · Sascha Hauer

Hi J,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

for now just support static boot command support

---
 arch/arm/lib/barebox.lds.S                |    4 +
 arch/blackfin/boards/ipe337/barebox.lds.S |    4 +
 arch/ppc/boards/pcm030/barebox.lds.S      |    4 +
 arch/sandbox/board/barebox.lds.S          |    4 +
 arch/sandbox/lib/barebox.lds.S            |    4 +
 arch/x86/lib/barebox.lds.S                |    9 ++-
 common/Kconfig                            |   11 ++
 common/Makefile                           |    1 +
 common/params.c                           |  158 +++++++++++++++++++++++++++++
 common/startup.c                          |   74 +++++++++++++-
 include/asm-generic/barebox.lds.h         |    2 +
 include/init.h                            |   28 +++++
 12 files changed, 301 insertions(+), 2 deletions(-)
 create mode 100644 common/params.c
Quoted 7 lines
Quoted 4 lines

Except for the inlined comments I'm generally ok with this patch. The more interesting part will be how the calling convention for barebox as a second stage loader is and how you preserve the registers used for commandline/atag passing during startup.

I take a look and no need to do something special we just have to put the data in the .data section as we will supposed to be call from memmory directly evenif we may ned to relocate our self

Nothing special? Then how does barebox know where to find the command line?

Quoted 17 lines
Quoted 6 lines

An idea which comes to my mind is that we could introduce a CONFIG_BAREBOX_SECOND_STAGE which switches to a completely different startup process. This startup process could then assume that sdram is already initialized and that we do not have to call board_init_lowlevel.

I get in mind to keep it maybe as we can run the lowlevel init from cache as a peekpoke table to reconfigure the board if needed

Quoted 2 lines

Another interesting thing is how will barebox behave if called as a second stage loader but without valid atags?

I think to use in this case the default config and let the boards to get a callback to overwrite it
I'll try to push patch soon to show the solution
I get in mind to maybe use the device tree also not sure yet

Quoted 3 lines
Quoted 3 lines
Quoted 8 lines
Quoted 7 lines

common/Kconfig choice · line 232

Quoted 3 lines
common/Kconfig +3 -0
+config BOOT_CMDLINE
+	bool "barebox boot command string"
+	help

This is useful if you intend to use barebox as a second stage bootloader and want to pass kernel like command line parameters to barebox. Otherwise say no here.

as you can have built_in cmdline you can use it also as a first stage

Yes, but this really serves no purpose, does it?

Quoted 47 lines
Quoted 23 lines
Quoted 23 lines
(quoted diff) +22 -0
+
+config CMDLINE
+	string "Default barebox command string"
+	depends on BOOT_CMDLINE
+	default ""
+	help
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <malloc.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <errno.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
Quoted 8 lines

common/params.c line 29

Quoted 6 lines
common/params.c new file +6 -0
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, a...)
+#endif

Please use the regular 'debug' function here.

ok

Quoted 10 lines

common/params.c line 36

Quoted 8 lines
common/params.c new file +7 -0
+
+/* This just allows us to keep track of which parameters are kmalloced. */
+struct kmalloced_param {
+	struct list_head list;
+	char val[];
+};
+static LIST_HEAD(kmalloced_params);

This seems unused.

yeah forget to remove it

Best Regards,
J.

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#6 lore raw

Re: [PATCH 2/3] add command line boot support

Quoted 30 lines · Sascha Hauer
Quoted 29 lines · Jean-Christophe PLAGNIOL-VILLARD

Hi Sascha,

Quoted 26 lines · Sascha Hauer

Hi J,

Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD

for now just support static boot command support

---
 arch/arm/lib/barebox.lds.S                |    4 +
 arch/blackfin/boards/ipe337/barebox.lds.S |    4 +
 arch/ppc/boards/pcm030/barebox.lds.S      |    4 +
 arch/sandbox/board/barebox.lds.S          |    4 +
 arch/sandbox/lib/barebox.lds.S            |    4 +
 arch/x86/lib/barebox.lds.S                |    9 ++-
 common/Kconfig                            |   11 ++
 common/Makefile                           |    1 +
 common/params.c                           |  158 +++++++++++++++++++++++++++++
 common/startup.c                          |   74 +++++++++++++-
 include/asm-generic/barebox.lds.h         |    2 +
 include/init.h                            |   28 +++++
 12 files changed, 301 insertions(+), 2 deletions(-)
 create mode 100644 common/params.c

Except for the inlined comments I'm generally ok with this patch. The more interesting part will be how the calling convention for barebox as a second stage loader is and how you preserve the registers used for commandline/atag passing during startup.

Quoted 6 lines
Quoted 3 lines

I take a look and no need to do something special we just have to put the data in the .data section as we will supposed to be call from memmory directly evenif we may ned to relocate our self

Nothing special? Then how does barebox know where to find the command line?

yeah I agree I'll send a patch i'll be more clear

Quoted 25 lines
Quoted 25 lines
Quoted 7 lines

An idea which comes to my mind is that we could introduce a CONFIG_BAREBOX_SECOND_STAGE which switches to a completely different startup process. This startup process could then assume that sdram is already initialized and that we do not have to call board_init_lowlevel.

I get in mind to keep it maybe as we can run the lowlevel init from cache as a peekpoke table to reconfigure the board if needed

Quoted 2 lines

Another interesting thing is how will barebox behave if called as a second stage loader but without valid atags?

I think to use in this case the default config and let the boards to get a callback to overwrite it
I'll try to push patch soon to show the solution
I get in mind to maybe use the device tree also not sure yet

Quoted 10 lines

common/Kconfig choice · line 232

Quoted 6 lines
common/Kconfig +3 -0
+config BOOT_CMDLINE
+	bool "barebox boot command string"
+	help

This is useful if you intend to use barebox as a second stage bootloader and want to pass kernel like command line parameters to barebox. Otherwise say no here.

Quoted 3 lines
Quoted 1 line

as you can have built_in cmdline you can use it also as a first stage

Yes, but this really serves no purpose, does it?

yeah it's as you can dynamse the board via the static cmdline
and other part without modifying the code
and you will be able to dynamise the shell as I'm prepaaring a patch to export them in the shell too

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#7 lore raw

PATCH 3/3 __setup test

In reply to Jean-Christophe PLAGNIOL-VILLARD
---
 common/startup.c |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)
common/startup.c +11 -3
index 98b4aab..1891cbd 100644
@@ -105,12 +105,20 @@ device_initcall(register_default_env);
 #endif
 
 #ifdef CONFIG_BOOT_CMDLINE
-static int __init bootmode(char *mode)
+static __initdata char bootmode[COMMAND_LINE_SIZE];
+
+static int __init setup_bootmode(char *mode)
+{
+	strcpy(bootmode, mode);
+	return 0;
+}
+__setup("boot=", setup_bootmode);
+static int bootmode_print(void)
 {
-	printf("boot=%s\n", mode);
+	printf("boot=%s\n", bootmode);
 	return 0;
 }
-__setup("boot=", bootmode);
+device_initcall(bootmode_print);
 #endif
 
 static int mount_root(void)
Signature · 7 lines
1.7.2.3


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#8 lore raw
In reply to Jean-Christophe PLAGNIOL-VILLARD

Hi,

I was talking of this patch serie

Best Regards,
J.

Quoted 15 lines · Jean-Christophe PLAGNIOL-VILLARD

HI,

as barebox is some times a second stage bootloader it could be intresting to pass some information

I'm currently working on two support
the atags for arm and the cmdline

The cmline could be static or dynamic
so it will be easy to customise a boot sequence and etc...

this first patch will just add static cmdline

later I'll send dynamic support and arm boot ABI

Quoted 8 lines

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox