Skip to contentSkip to conversation

ASoC: Add DAPM widget and path data to CODEC driver structure

PATCH In review Mark Brown 2 participants 4 messages Mar 7, 2011 – Mar 8, 2011

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/2 ASoC: Add DAPM widget and path data to CODEC driver structure

Allow a slight simplification of CODEC drivers by allowing DAPM routes and widgets to be provided in a table. They will be instantiated at the end of CODEC probe.

---
 include/sound/soc.h  |    6 ++++++
 sound/soc/soc-core.c |   12 ++++++++++--
 2 files changed, 16 insertions(+), 2 deletions(-)
include/sound/soc.h +6 -0
index a23f5a5..363e3a8 100644
@@ -563,6 +563,12 @@ struct snd_soc_codec_driver {
 			pm_message_t state);
 	int (*resume)(struct snd_soc_codec *);
 
+	/* Default DAPM setup, added after probe() is run */
+	const struct snd_soc_dapm_widget *dapm_widgets;
+	int num_dapm_widgets;
+	const struct snd_soc_dapm_route *dapm_routes;
+	int num_dapm_routes;
+
 	/* codec IO */
 	unsigned int (*read)(struct snd_soc_codec *, unsigned int);
 	int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
sound/soc/soc-core.c +10 -2
index 8926d38..286a385 100644
@@ -1464,6 +1464,7 @@ static int soc_probe_codec(struct snd_soc_card *card,
 			   struct snd_soc_codec *codec)
 {
 	int ret = 0;
+	const struct snd_soc_codec_driver *driver = codec->driver;
 
 	codec->card = card;
 	codec->dapm.card = card;
@@ -1472,8 +1473,8 @@ static int soc_probe_codec(struct snd_soc_card *card,
 	if (!try_module_get(codec->dev->driver->owner))
 		return -ENODEV;
 
-	if (codec->driver->probe) {
-		ret = codec->driver->probe(codec);
+	if (driver->probe) {
+		ret = driver->probe(codec);
 		if (ret < 0) {
 			dev_err(codec->dev,
 				"asoc: failed to probe CODEC %s: %d\n",
@@ -1482,6 +1483,13 @@ static int soc_probe_codec(struct snd_soc_card *card,
 		}
 	}
 
+	if (driver->dapm_widgets)
+		snd_soc_dapm_new_controls(&codec->dapm, driver->dapm_widgets,
+					  driver->num_dapm_widgets);
+	if (driver->dapm_routes)
+		snd_soc_dapm_add_routes(&codec->dapm, driver->dapm_routes,
+					driver->num_dapm_routes);
+
 	soc_init_codec_debugfs(codec);
 
 	/* mark codec as probed and add to card codec list */
Signature · 1 line
1.7.2.3
author
#1 lore raw

PATCH 2/2 ASoC: Use data base init for WM9081 DAPM

---
 sound/soc/codecs/wm9081.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)
sound/soc/codecs/wm9081.c +5 -6
index 7883f3e..8b1b2c9 100644
@@ -762,7 +762,7 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
 };
 
 
-static const struct snd_soc_dapm_route audio_paths[] = {
+static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
 	{ "DAC", NULL, "CLK_SYS" },
 	{ "DAC", NULL, "CLK_DSP" },
 
@@ -1232,7 +1232,6 @@ static struct snd_soc_dai_driver wm9081_dai = {
 static int wm9081_probe(struct snd_soc_codec *codec)
 {
 	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	int ret;
 	u16 reg;
 
@@ -1282,10 +1281,6 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 				     ARRAY_SIZE(wm9081_eq_controls));
 	}
 
-	snd_soc_dapm_new_controls(dapm, wm9081_dapm_widgets,
-				  ARRAY_SIZE(wm9081_dapm_widgets));
-	snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
-
 	return ret;
 }
 
@@ -1334,6 +1329,10 @@ static struct snd_soc_codec_driver soc_codec_dev_wm9081 = {
 	.reg_word_size = sizeof(u16),
 	.reg_cache_default = wm9081_reg_defaults,
 	.volatile_register = wm9081_volatile_register,
+	.dapm_widgets	  = wm9081_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets),
+	.dapm_routes     = wm9081_audio_paths,
+	.num_dapm_routes = ARRAY_SIZE(wm9081_audio_paths),
 };
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
Signature · 1 line
1.7.2.3