Skip to contentSkip to conversation

Add support for O_MAYEXEC

PATCH Superseded Mickaël Salaün 2 participants 7 messages Apr 30, 2020 – May 1, 2020

Subsystems (9)

v4 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add support for O_MAYEXEC

Hi,

The goal of this patch series is to enable to control script execution with interpreters help. A new O_MAYEXEC flag, usable through openat2(2), is added to enable userspace script interpreter to delegate to the kernel (and thus the system security policy) the permission to interpret/execute scripts or other files containing what can be seen as commands.

This fourth patch series switch back from RESOLVE_MAYEXEC to O_MAYEXEC which is more appropriate. However, this new flag is only taken into account by openat2(2), but not open(2) nor openat(2).

A simple system-wide security policy can be enforced by the system administrator through a sysctl configuration consistent with the mount points or the file access rights. The documentation patch explains the prerequisites.

Furthermore, the security policy can also be delegated to an LSM, either a MAC system or an integrity system. For instance, the new kernel MAY_OPENEXEC flag closes a major IMA measurement/appraisal interpreter integrity gap by bringing the ability to check the use of scripts [1]. Other uses are expected, such as for openat2(2) [2], SGX integration [3], bpffs [4] or IPE [5].

Userspace needs to adapt to take advantage of this new feature. For example, the PEP 578 [6] (Runtime Audit Hooks) enables Python 3.8 to be extended with policy enforcement points related to code interpretation, which can be used to align with the PowerShell audit features. Additional Python security improvements (e.g. a limited interpreter withou -c, stdin piping of code) are on their way.

The initial idea come from CLIP OS 4 and the original implementation has been used for more than 11 years:
https://github.com/clipos-archive/clipos4_doc

An introduction to O_MAYEXEC was given at the Linux Security Summit Europe 2018 - Linux Kernel Security Contributions by ANSSI:
https://www.youtube.com/watch?v=chNjCRtPKQY&t=17m15s
The "write xor execute" principle was explained at Kernel Recipes 2018 - CLIP OS: a defense-in-depth OS:
https://www.youtube.com/watch?v=PjRE0uBtkHU&t=11m14s

This patch series can be applied on top of v5.7-rc3. This can be tested with CONFIG_SYSCTL. I would really appreciate constructive comments on this patch series.

Previous version:
https://lore.kernel.org/lkml/[email protected]/

[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/CALCETrVovr8XNZSroey7pHF46O=kj_c5D9K8h=z2T_cNrpvMig@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CALCETrVeZ0eufFXwfhtaG_j+AdvbzEWE0M3wjXMWVEO7pj+xkw@mail.gmail.com/
[5] https://lore.kernel.org/lkml/[email protected]/
[6] https://www.python.org/dev/peps/pep-0578/

Regards,

Mickaël Salaün (5):
fs: Add support for an O_MAYEXEC flag on openat2(2)
fs: Add a MAY_EXECMOUNT flag to infer the noexec mount property
fs: Enable to enforce noexec mounts or file exec through O_MAYEXEC selftest/openat2: Add tests for O_MAYEXEC enforcing
doc: Add documentation for the fs.open_mayexec_enforce sysctl

 Documentation/admin-guide/sysctl/fs.rst       |  44 +++
 fs/fcntl.c                                    |   2 +-
 fs/namei.c                                    |  74 +++-
 fs/open.c                                     |   8 +
 include/linux/fcntl.h                         |   2 +-
 include/linux/fs.h                            |   7 +
 include/uapi/asm-generic/fcntl.h              |   7 +
 kernel/sysctl.c                               |   7 +
 tools/testing/selftests/kselftest_harness.h   |   3 +
 tools/testing/selftests/openat2/Makefile      |   3 +-
 tools/testing/selftests/openat2/config        |   1 +
 tools/testing/selftests/openat2/helpers.h     |   1 +
 .../testing/selftests/openat2/omayexec_test.c | 330 ++++++++++++++++++
 13 files changed, 485 insertions(+), 4 deletions(-)
 create mode 100644 tools/testing/selftests/openat2/config
 create mode 100644 tools/testing/selftests/openat2/omayexec_test.c
Signature · 1 line
2.26.2
#1 lore raw

PATCH v4 1/5 fs: Add support for an O_MAYEXEC flag on openat2(2)

When the O_MAYEXEC flag is passed, openat2(2) may be subject to additional restrictions depending on a security policy managed by the kernel through a sysctl or implemented by an LSM thanks to the inode_permission hook. This new flag is ignored by open(2) and openat(2).

The underlying idea is to be able to restrict scripts interpretation according to a policy defined by the system administrator. For this to be possible, script interpreters must use the O_MAYEXEC flag appropriately. To be fully effective, these interpreters also need to handle the other ways to execute code: command line parameters (e.g., option -e for Perl), module loading (e.g., option -m for Python), stdin, file sourcing, environment variables, configuration files, etc. According to the threat model, it may be acceptable to allow some script interpreters (e.g. Bash) to interpret commands from stdin, may it be a TTY or a pipe, because it may not be enough to (directly) perform syscalls. Further documentation can be found in a following patch.

A simple security policy implementation, configured through a dedicated sysctl, is available in a following patch.

This is an updated subset of the patch initially written by Vincent Strubel for CLIP OS 4:
https://github.com/clipos-archive/src_platform_clip-patches/blob/f5cb330d6b684752e403b4e41b39f7004d88e561/1901_open_mayexec.patch
This patch has been used for more than 11 years with customized script interpreters. Some examples (with the original name O_MAYEXEC) can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC

---

Changes since v3:
* Switch back to O_MAYEXEC, but only handle it with openat2(2) which checks unknown flags (suggested by Aleksa Sarai). Cf.
https://lore.kernel.org/lkml/[email protected]/

Changes since v2:
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2). This change enables to not break existing application using bogus O_* flags that may be ignored by current kernels by using a new dedicated flag, only usable through openat2(2) (suggested by Jeff Layton). Using this flag will results in an error if the running kernel does not support it. User space needs to manage this case, as with other RESOLVE_* flags. The best effort approach to security (for most common distros) will simply consists of ignoring such an error and retry without RESOLVE_MAYEXEC. However, a fully controlled system may which to error out if such an inconsistency is detected.

Changes since v1:
* Set __FMODE_EXEC when using O_MAYEXEC to make this information available through the new fanotify/FAN_OPEN_EXEC event (suggested by Jan Kara and Matthew Bobrowski).

---
 fs/fcntl.c                       | 2 +-
 fs/open.c                        | 8 ++++++++
 include/linux/fcntl.h            | 2 +-
 include/linux/fs.h               | 2 ++
 include/uapi/asm-generic/fcntl.h | 7 +++++++
 5 files changed, 19 insertions(+), 2 deletions(-)
fs/fcntl.c +1 -1
index 2e4c0fa2074b..0357ad667563 100644
@@ -1033,7 +1033,7 @@ static int __init fcntl_init(void)
 	 * Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
 	 * is defined as O_NONBLOCK on some platforms and not on others.
 	 */
-	BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ !=
+	BUILD_BUG_ON(22 - 1 /* for O_RDONLY being 0 */ !=
 		HWEIGHT32(
 			(VALID_OPEN_FLAGS & ~(O_NONBLOCK | O_NDELAY)) |
 			__FMODE_EXEC | __FMODE_NONOTIFY));
fs/open.c +8 -0
index 719b320ede52..f3f08a36d1d2 100644
@@ -962,6 +962,8 @@ inline struct open_how build_open_how(int flags, umode_t mode)
 		.mode = mode & S_IALLUGO,
 	};
 
+	/* O_MAYEXEC is ignored by syscalls relying on build_open_how(). */
+	how.flags &= ~O_MAYEXEC;
 	/* O_PATH beats everything else. */
 	if (how.flags & O_PATH)
 		how.flags &= O_PATH_FLAGS;
@@ -1029,6 +1031,12 @@ inline int build_open_flags(const struct open_how *how, struct open_flags *op)
 	if (flags & __O_SYNC)
 		flags |= O_DSYNC;
 
+	/* Checks execution permissions on open. */
+	if (flags & O_MAYEXEC) {
+		acc_mode |= MAY_OPENEXEC;
+		flags |= __FMODE_EXEC;
+	}
+
 	op->open_flag = flags;
 
 	/* O_TRUNC implies we need access checks for write permissions */
include/linux/fcntl.h +1 -1
index 7bcdcf4f6ab2..e188a360fa5f 100644
@@ -10,7 +10,7 @@
 	(O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC | \
 	 O_APPEND | O_NDELAY | O_NONBLOCK | O_NDELAY | __O_SYNC | O_DSYNC | \
 	 FASYNC	| O_DIRECT | O_LARGEFILE | O_DIRECTORY | O_NOFOLLOW | \
-	 O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE)
+	 O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE | O_MAYEXEC)
 
 /* List of all valid flags for the how->upgrade_mask argument: */
 #define VALID_UPGRADE_FLAGS \
include/linux/fs.h +2 -0
index 4f6f59b4f22a..313c934de9ee 100644
@@ -101,6 +101,8 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
 #define MAY_CHDIR		0x00000040
 /* called from RCU mode, don't block */
 #define MAY_NOT_BLOCK		0x00000080
+/* the inode is opened with O_MAYEXEC */
+#define MAY_OPENEXEC		0x00000100
 
 /*
  * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
include/uapi/asm-generic/fcntl.h +7 -0
index 9dc0bf0c5a6e..bca90620119f 100644
@@ -97,6 +97,13 @@
 #define O_NDELAY	O_NONBLOCK
 #endif
 
+/*
+ * Code execution from file is intended, checks such permission.  A simple
+ * policy can be enforced system-wide as explained in
+ * Documentation/admin-guide/sysctl/fs.rst .
+ */
+#define O_MAYEXEC	040000000
+
 #define F_DUPFD		0	/* dup */
 #define F_GETFD		1	/* get close_on_exec */
 #define F_SETFD		2	/* set/clear close_on_exec */
Signature · 1 line
2.26.2
Reviewed-by on v4 1/5
#2 lore raw

Re: [PATCH v4 1/5] fs: Add support for an O_MAYEXEC flag on openat2(2)

Quoted 4 lines · Mickaël Salaün

When the O_MAYEXEC flag is passed, openat2(2) may be subject to additional restrictions depending on a security policy managed by the kernel through a sysctl or implemented by an LSM thanks to the inode_permission hook. This new flag is ignored by open(2) and openat(2).

#3 lore raw

PATCH v4 2/5 fs: Add a MAY_EXECMOUNT flag to infer the noexec mount property

In reply to Mickaël Salaün

An LSM doesn't get path information related to an access request to open an inode. This new (internal) MAY_EXECMOUNT flag enables an LSM to check if the underlying mount point of an inode is marked as executable. This is useful to implement a security policy taking advantage of the noexec mount option.

This flag is set according to path_noexec(), which checks if a mount point is mounted with MNT_NOEXEC or if the underlying superblock is SB_I_NOEXEC.

---
 fs/namei.c         | 2 ++
 include/linux/fs.h | 2 ++
 2 files changed, 4 insertions(+)
fs/namei.c +2 -0
index a320371899cf..33b6d372e74a 100644
@@ -2849,6 +2849,8 @@ static int may_open(const struct path *path, int acc_mode, int flag)
 		break;
 	}
 
+	/* Pass the mount point executability. */
+	acc_mode |= path_noexec(path) ? 0 : MAY_EXECMOUNT;
 	error = inode_permission(inode, MAY_OPEN | acc_mode);
 	if (error)
 		return error;
include/linux/fs.h +2 -0
index 313c934de9ee..79435fca6c3e 100644
@@ -103,6 +103,8 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
 #define MAY_NOT_BLOCK		0x00000080
 /* the inode is opened with O_MAYEXEC */
 #define MAY_OPENEXEC		0x00000100
+/* the mount point is marked as executable */
+#define MAY_EXECMOUNT		0x00000200
 
 /*
  * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
Signature · 1 line
2.26.2
#4 lore raw

PATCH v4 3/5 fs: Enable to enforce noexec mounts or file exec through O_MAYEXEC

In reply to Mickaël Salaün

Enable to either propagate the mount options from the underlying VFS mount to prevent execution, or to propagate the file execute permission. This may allow a script interpreter to check execution permissions before reading commands from a file.

The main goal is to be able to protect the kernel by restricting arbitrary syscalls that an attacker could perform with a crafted binary or certain script languages. It also improves multilevel isolation by reducing the ability of an attacker to use side channels with specific code. These restrictions can natively be enforced for ELF binaries (with the noexec mount option) but require this kernel extension to properly handle scripts (e.g., Python, Perl).

Add a new sysctl fs.open_mayexec_enforce to control this behavior. Indeed, because of compatibility with installed systems, only the system administrator is able to check that this new enforcement is in line with the system mount points and file permissions. A following patch adds documentation.

---

Changes since v3:
* Update comment with O_MAYEXEC.

Changes since v2:
* Cosmetic changes.

Changes since v1:
* Move code from Yama to the FS subsystem (suggested by Kees Cook).
* Make omayexec_inode_permission() static (suggested by Jann Horn).
* Use mode 0600 for the sysctl.
* Only match regular files (not directories nor other types), which follows the same semantic as commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()").

---
 fs/namei.c         | 72 +++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/fs.h |  3 ++
 kernel/sysctl.c    |  7 +++++
 3 files changed, 81 insertions(+), 1 deletion(-)
fs/namei.c +71 -1
index 33b6d372e74a..a3ac4470da43 100644
@@ -39,6 +39,7 @@
 #include <linux/bitops.h>
 #include <linux/init_task.h>
 #include <linux/uaccess.h>
+#include <linux/sysctl.h>
 
 #include "internal.h"
 #include "mount.h"
@@ -411,10 +412,40 @@ static int sb_permission(struct super_block *sb, struct inode *inode, int mask)
 	return 0;
 }
 
+#define OMAYEXEC_ENFORCE_NONE	0
+#define OMAYEXEC_ENFORCE_MOUNT	(1 << 0)
+#define OMAYEXEC_ENFORCE_FILE	(1 << 1)
+#define _OMAYEXEC_LAST		OMAYEXEC_ENFORCE_FILE
+#define _OMAYEXEC_MASK		((_OMAYEXEC_LAST << 1) - 1)
+
+/**
+ * omayexec_inode_permission - Check O_MAYEXEC before accessing an inode
+ *
+ * @inode: Inode to check permission on
+ * @mask: Right to check for (%MAY_OPENEXEC, %MAY_EXECMOUNT, %MAY_EXEC)
+ *
+ * Returns 0 if access is permitted, -EACCES otherwise.
+ */
+static inline int omayexec_inode_permission(struct inode *inode, int mask)
+{
+	if (!(mask & MAY_OPENEXEC))
+		return 0;
+
+	if ((sysctl_omayexec_enforce & OMAYEXEC_ENFORCE_MOUNT) &&
+			!(mask & MAY_EXECMOUNT))
+		return -EACCES;
+
+	if (sysctl_omayexec_enforce & OMAYEXEC_ENFORCE_FILE)
+		return generic_permission(inode, MAY_EXEC);
+
+	return 0;
+}
+
 /**
  * inode_permission - Check for access rights to a given inode
  * @inode: Inode to check permission on
- * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
+ * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC, %MAY_OPENEXEC,
+ *        %MAY_EXECMOUNT)
  *
  * Check for read/write/execute permissions on an inode.  We use fs[ug]id for
  * this, letting us set arbitrary permissions for filesystem access without
@@ -454,10 +485,48 @@ int inode_permission(struct inode *inode, int mask)
 	if (retval)
 		return retval;
 
+	retval = omayexec_inode_permission(inode, mask);
+	if (retval)
+		return retval;
+
 	return security_inode_permission(inode, mask);
 }
 EXPORT_SYMBOL(inode_permission);
 
+/*
+ * Handle open_mayexec_enforce sysctl
+ */
+#ifdef CONFIG_SYSCTL
+int proc_omayexec(struct ctl_table *table, int write, void __user *buffer,
+		size_t *lenp, loff_t *ppos)
+{
+	int error;
+
+	if (write) {
+		struct ctl_table table_copy;
+		int tmp_mayexec_enforce;
+
+		if (!capable(CAP_MAC_ADMIN))
+			return -EPERM;
+		tmp_mayexec_enforce = *((int *)table->data);
+		table_copy = *table;
+		/* Do not erase sysctl_omayexec_enforce. */
+		table_copy.data = &tmp_mayexec_enforce;
+		error = proc_dointvec(&table_copy, write, buffer, lenp, ppos);
+		if (error)
+			return error;
+		if ((tmp_mayexec_enforce | _OMAYEXEC_MASK) != _OMAYEXEC_MASK)
+			return -EINVAL;
+		*((int *)table->data) = tmp_mayexec_enforce;
+	} else {
+		error = proc_dointvec(table, write, buffer, lenp, ppos);
+		if (error)
+			return error;
+	}
+	return 0;
+}
+#endif
+
 /**
  * path_get - get a reference to a path
  * @path: path to get the reference to
@@ -922,6 +991,7 @@ int sysctl_protected_symlinks __read_mostly = 0;
 int sysctl_protected_hardlinks __read_mostly = 0;
 int sysctl_protected_fifos __read_mostly;
 int sysctl_protected_regular __read_mostly;
+int sysctl_omayexec_enforce __read_mostly = OMAYEXEC_ENFORCE_NONE;
 
 /**
  * may_follow_link - Check symlink following for unsafe situations
include/linux/fs.h +3 -0
index 79435fca6c3e..d44650a674ad 100644
@@ -83,6 +83,7 @@ extern int sysctl_protected_symlinks;
 extern int sysctl_protected_hardlinks;
 extern int sysctl_protected_fifos;
 extern int sysctl_protected_regular;
+extern int sysctl_omayexec_enforce;
 
 typedef __kernel_rwf_t rwf_t;
 
@@ -3545,6 +3546,8 @@ int proc_nr_dentry(struct ctl_table *table, int write,
 		  void __user *buffer, size_t *lenp, loff_t *ppos);
 int proc_nr_inodes(struct ctl_table *table, int write,
 		   void __user *buffer, size_t *lenp, loff_t *ppos);
+int proc_omayexec(struct ctl_table *table, int write, void __user *buffer,
+		size_t *lenp, loff_t *ppos);
 int __init get_filesystem_list(char *buf);
 
 #define __FMODE_EXEC		((__force int) FMODE_EXEC)
kernel/sysctl.c +7 -0
index 8a176d8727a3..911afa69f84c 100644
@@ -1892,6 +1892,13 @@ static struct ctl_table fs_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= &two,
 	},
+	{
+		.procname       = "open_mayexec_enforce",
+		.data           = &sysctl_omayexec_enforce,
+		.maxlen         = sizeof(int),
+		.mode           = 0600,
+		.proc_handler   = proc_omayexec,
+	},
 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
 	{
 		.procname	= "binfmt_misc",
Signature · 1 line
2.26.2
#5 lore raw

PATCH v4 4/5 selftest/openat2: Add tests for O_MAYEXEC enforcing

In reply to Mickaël Salaün

Test propagation of noexec mount points or file executability through files open with or without O_MAYEXEC.

---

Changes since v3:
* Replace RESOLVE_MAYEXEC with O_MAYEXEC.
* Add tests to check that O_MAYEXEC is ignored by open(2) and openat(2).

Changes since v2:
* Move tests from exec/ to openat2/ .
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2).
* Cleanup tests.

Changes since v1:
* Move tests from yama/ to exec/ .
* Fix _GNU_SOURCE in kselftest_harness.h .
* Add a new test sysctl_access_write to check if CAP_MAC_ADMIN is taken into account.
* Test directory execution which is always forbidden since commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()"), and also check that even the root user can not bypass file execution checks.
* Make sure delete_workspace() always as enough right to succeed.
* Cosmetic cleanup.

---
 tools/testing/selftests/kselftest_harness.h   |   3 +
 tools/testing/selftests/openat2/Makefile      |   3 +-
 tools/testing/selftests/openat2/config        |   1 +
 tools/testing/selftests/openat2/helpers.h     |   1 +
 .../testing/selftests/openat2/omayexec_test.c | 330 ++++++++++++++++++
 5 files changed, 337 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/openat2/config
 create mode 100644 tools/testing/selftests/openat2/omayexec_test.c
tools/testing/selftests/kselftest_harness.h +3 -0
index 2bb8c81fc0b4..f6e056ba4a13 100644
@@ -50,7 +50,10 @@
 #ifndef __KSELFTEST_HARNESS_H
 #define __KSELFTEST_HARNESS_H
 
+#ifndef _GNU_SOURCE
 #define _GNU_SOURCE
+#endif
+
 #include <asm/types.h>
 #include <errno.h>
 #include <stdbool.h>
tools/testing/selftests/openat2/Makefile +2 -1
index 4b93b1417b86..cb98bdb4d5b1 100644
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
 CFLAGS += -Wall -O2 -g -fsanitize=address -fsanitize=undefined
-TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test
+LDLIBS += -lcap
+TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test omayexec_test
 
 include ../lib.mk
 
tools/testing/selftests/openat2/config new file +1 -0
new file mode 100644
index 000000000000..dd53c266bf52
@@ -0,0 +1 @@
+CONFIG_SYSCTL=y
tools/testing/selftests/openat2/helpers.h +1 -0
index a6ea27344db2..1dcd3e1e2f38 100644
@@ -9,6 +9,7 @@
 
 #define _GNU_SOURCE
 #include <stdint.h>
+#include <stdbool.h>
 #include <errno.h>
 #include <linux/types.h>
 #include "../kselftest.h"
tools/testing/selftests/openat2/omayexec_test.c new file +330 -0

330 lines not on this page · raw message

Signature · 1 line
2.26.2
#6 lore raw

PATCH v4 5/5 doc: Add documentation for the fs.open_mayexec_enforce sysctl

In reply to Mickaël Salaün

This sysctl enables to propagate executable permission to userspace thanks to the O_MAYEXEC flag.

---

Changes since v3:
* Switch back to O_MAYEXEC and highlight that it is only taken into account by openat2(2).

Changes since v2:
* Update documentation with the new RESOLVE_MAYEXEC.
* Improve explanations, including concerns about LD_PRELOAD.

Changes since v1:
* Move from LSM/Yama to sysctl/fs .

---
 Documentation/admin-guide/sysctl/fs.rst | 44 +++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
Documentation/admin-guide/sysctl/fs.rst +44 -0
index 2a45119e3331..d55615c36772 100644
@@ -37,6 +37,7 @@ Currently, these files are in /proc/sys/fs:
 - inode-nr
 - inode-state
 - nr_open
+- open_mayexec_enforce
 - overflowuid
 - overflowgid
 - pipe-user-pages-hard
@@ -165,6 +166,49 @@ system needs to prune the inode list instead of allocating
 more.
 
 
+open_mayexec_enforce
+--------------------
+
+While being ignored by :manpage:`open(2)` and :manpage:`openat(2)`, the
+``O_MAYEXEC`` flag can be passed to :manpage:`openat2(2)` to only open regular
+files that are expected to be executable.  If the file is not identified as
+executable, then the syscall returns -EACCES.  This may allow a script
+interpreter to check executable permission before reading commands from a file,
+or a dynamic linker to only load executable shared objects.  One interesting
+use case is to enforce a "write xor execute" policy through interpreters.
+
+The ability to restrict code execution must be thought as a system-wide policy,
+which first starts by restricting mount points with the ``noexec`` option.
+This option is also automatically applied to special filesystems such as /proc
+.  This prevents files on such mount points to be directly executed by the
+kernel or mapped as executable memory (e.g. libraries).  With script
+interpreters using the ``O_MAYEXEC`` flag, the executable permission can then
+be checked before reading commands from files. This makes it possible to
+enforce the ``noexec`` at the interpreter level, and thus propagates this
+security policy to scripts.  To be fully effective, these interpreters also
+need to handle the other ways to execute code: command line parameters (e.g.,
+option ``-e`` for Perl), module loading (e.g., option ``-m`` for Python),
+stdin, file sourcing, environment variables, configuration files, etc.
+According to the threat model, it may be acceptable to allow some script
+interpreters (e.g. Bash) to interpret commands from stdin, may it be a TTY or a
+pipe, because it may not be enough to (directly) perform syscalls.
+
+There are two complementary security policies: enforce the ``noexec`` mount
+option, and enforce executable file permission.  These policies are handled by
+the ``fs.open_mayexec_enforce`` sysctl (writable only with ``CAP_MAC_ADMIN``)
+as a bitmask:
+
+1 - Mount restriction: checks that the mount options for the underlying VFS
+    mount do not prevent execution.
+
+2 - File permission restriction: checks that the to-be-opened file is marked as
+    executable for the current process (e.g., POSIX permissions).
+
+Code samples can be found in tools/testing/selftests/openat2/omayexec_test.c
+and at
+https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC .
+
+
 overflowgid & overflowuid
 -------------------------
 
Signature · 1 line
2.26.2