Skip to contentSkip to conversation

HID: logitech-dj: Adjustments for some function implementations

PATCH New SF Markus Elfring 1 participant 5 messages Feb 5, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover HID: logitech-dj: Adjustments for some function implementations

From: Markus Elfring <[email protected]>
Date: Mon, 5 Feb 2018 22:22:11 +0100

A few update suggestions were taken into account
from static source code analysis.

Markus Elfring (4):
Delete an error message for a failed memory allocation in two functions Improve a size determination in four functions
Combine substrings for seven messages
Fix a typo in a comment line

 drivers/hid/hid-logitech-dj.c | 53 +++++++++++++++++++------------------------
 1 file changed, 23 insertions(+), 30 deletions(-)
Signature · 1 line
2.16.1
#1 lore raw

PATCH 1/4 HID: logitech-dj: Delete an error message for a failed memory allocation in two functions

From: Markus Elfring <[email protected]>
Date: Mon, 5 Feb 2018 21:36:18 +0100

Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

---
 drivers/hid/hid-logitech-dj.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/hid/hid-logitech-dj.c +3 -9
index 826fa1e1c8d9..4c92b2cb5768 100644
@@ -418,12 +418,8 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 	strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys));
 
 	dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL);
-
-	if (!dj_dev) {
-		dev_err(&djrcv_hdev->dev, "%s: failed allocating dj_device\n",
-			__func__);
+	if (!dj_dev)
 		goto dj_device_allocate_fail;
-	}
 
 	dj_dev->reports_supported = get_unaligned_le32(
 		dj_report->report_params + DEVICE_PAIRED_RF_REPORT_TYPE);
@@ -1011,11 +1007,9 @@ static int logi_dj_probe(struct hid_device *hdev,
 	/* Treat interface 2 */
 
 	djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL);
-	if (!djrcv_dev) {
-		dev_err(&hdev->dev,
-			"%s:failed allocating dj_receiver_dev\n", __func__);
+	if (!djrcv_dev)
 		return -ENOMEM;
-	}
+
 	djrcv_dev->hdev = hdev;
 	INIT_WORK(&djrcv_dev->work, delayedwork_callback);
 	spin_lock_init(&djrcv_dev->lock);
Signature · 1 line
2.16.1
#2 lore raw

PATCH 2/4 HID: logitech-dj: Improve a size determination in four functions

In reply to SF Markus Elfring

From: Markus Elfring <[email protected]>
Date: Mon, 5 Feb 2018 21:47:45 +0100

Replace the specification of data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

---
 drivers/hid/hid-logitech-dj.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/hid/hid-logitech-dj.c +4 -6
index 4c92b2cb5768..0da00d256ca7 100644
@@ -417,7 +417,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 	snprintf(tmpstr, sizeof(tmpstr), ":%d", dj_report->device_index);
 	strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys));
 
-	dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL);
+	dj_dev = kzalloc(sizeof(*dj_dev), GFP_KERNEL);
 	if (!dj_dev)
 		goto dj_device_allocate_fail;
 
@@ -611,7 +611,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
 	if (djrcv_dev->querying_devices)
 		return 0;
 
-	dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
+	dj_report = kzalloc(sizeof(*dj_report), GFP_KERNEL);
 	if (!dj_report)
 		return -ENOMEM;
 	dj_report->report_id = REPORT_ID_DJ_SHORT;
@@ -627,11 +627,10 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
 					  unsigned timeout)
 {
 	struct hid_device *hdev = djrcv_dev->hdev;
-	struct dj_report *dj_report;
 	u8 *buf;
 	int retval;
+	struct dj_report *dj_report = kzalloc(sizeof(*dj_report), GFP_KERNEL);
 
-	dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
 	if (!dj_report)
 		return -ENOMEM;
 	dj_report->report_id = REPORT_ID_DJ_SHORT;
@@ -1005,8 +1004,7 @@ static int logi_dj_probe(struct hid_device *hdev,
 	}
 
 	/* Treat interface 2 */
-
-	djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL);
+	djrcv_dev = kzalloc(sizeof(*djrcv_dev), GFP_KERNEL);
 	if (!djrcv_dev)
 		return -ENOMEM;
 
Signature · 1 line
2.16.1
#3 lore raw

PATCH 3/4 HID: logitech-dj: Combine substrings for seven messages

In reply to SF Markus Elfring

From: Markus Elfring <[email protected]>
Date: Mon, 5 Feb 2018 22:06:20 +0100

The script "checkpatch.pl" pointed information out like the following.

WARNING: quoted string split across lines

Thus fix the affected source code places.

---
 drivers/hid/hid-logitech-dj.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)
drivers/hid/hid-logitech-dj.c +15 -14
index 0da00d256ca7..f1496c6303ce 100644
@@ -463,16 +463,17 @@ static void delayedwork_callback(struct work_struct *work)
 				sizeof(struct dj_report));
 
 	if (count != sizeof(struct dj_report)) {
-		dev_err(&djrcv_dev->hdev->dev, "%s: workitem triggered without "
-			"notifications available\n", __func__);
+		dev_err(&djrcv_dev->hdev->dev,
+			"%s: workitem triggered without notifications available\n",
+			__func__);
 		spin_unlock_irqrestore(&djrcv_dev->lock, flags);
 		return;
 	}
 
 	if (!kfifo_is_empty(&djrcv_dev->notif_fifo)) {
 		if (schedule_work(&djrcv_dev->work) = 0) {
-			dbg_hid("%s: did not schedule the work item, was "
-				"already queued\n", __func__);
+			dbg_hid("%s: did not schedule the work item, was already queued\n",
+				__func__);
 		}
 	}
 
@@ -502,8 +503,8 @@ static void delayedwork_callback(struct work_struct *work)
 			break;
 		}
 		dev_err(&djrcv_dev->hdev->dev,
-			"%s:logi_dj_recv_query_paired_devices "
-			"error:%d\n", __func__, retval);
+			"%s:logi_dj_recv_query_paired_devices error:%d\n",
+			__func__, retval);
 		}
 		dbg_hid("%s: unexpected report type\n", __func__);
 	}
@@ -517,8 +518,8 @@ static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev,
 	kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
 
 	if (schedule_work(&djrcv_dev->work) = 0) {
-		dbg_hid("%s: did not schedule the work item, was already "
-			"queued\n", __func__);
+		dbg_hid("%s: did not schedule the work item, was already queued\n",
+			__func__);
 	}
 }
 
@@ -541,8 +542,7 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
 					     HID_INPUT_REPORT,
 					     reportbuffer,
 					     hid_reportid_size_map[i], 1)) {
-				dbg_hid("hid_input_report error sending null "
-					"report\n");
+				dbg_hid("hid_input_report error sending null report\n");
 			}
 		}
 	}
@@ -770,8 +770,8 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 	}
 
 	if (djdev->reports_supported & STD_MOUSE) {
-		dbg_hid("%s: sending a mouse descriptor, reports_supported: "
-			"%x\n", __func__, djdev->reports_supported);
+		dbg_hid("%s: sending a mouse descriptor, reports_supported: %x\n",
+			__func__, djdev->reports_supported);
 		rdcat(rdesc, &rsize, mse_descriptor, sizeof(mse_descriptor));
 	}
 
@@ -1068,8 +1068,9 @@ static int logi_dj_probe(struct hid_device *hdev,
 
 	retval = logi_dj_recv_query_paired_devices(djrcv_dev);
 	if (retval < 0) {
-		dev_err(&hdev->dev, "%s:logi_dj_recv_query_paired_devices "
-			"error:%d\n", __func__, retval);
+		dev_err(&hdev->dev,
+			"%s:logi_dj_recv_query_paired_devices error:%d\n",
+			__func__, retval);
 		goto logi_dj_recv_query_paired_devices_failed;
 	}
 
Signature · 1 line
2.16.1
#4 lore raw

PATCH 4/4 HID: logitech-dj: Fix a typo in a comment line

In reply to SF Markus Elfring

From: Markus Elfring <[email protected]>
Date: Mon, 5 Feb 2018 22:14:49 +0100

Adjust a word in this description.

---
 drivers/hid/hid-logitech-dj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/hid-logitech-dj.c +1 -1
index f1496c6303ce..de1859fade5c 100644
@@ -318,7 +318,7 @@ static const char hidpp_descriptor[] = {
  *
  * Right now, RF report types have the same report types (or report id's)
  * than the hid report created from those RF reports. In the future
- * this doesnt have to be true.
+ * this doesn't have to be true.
  *
  * For instance, RF report type 0x01 which has a size of 8 bytes, corresponds
  * to hid report id 0x01, this is standard keyboard. Same thing applies to mice
Signature · 1 line
2.16.1