Skip to contentSkip to conversation

GFS2: directly write blocks past i_size

PATCH New Benjamin Marzinski 2 participants 4 messages Mar 17, 2011 – Mar 18, 2011 GFS2 file system

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 GFS2: directly write blocks past i_size

GFS2 was relying on the writepage code to write out the zeroed data for fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size. If it is, it will be ignored. To work around this, gfs2 now calls write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE is set, and it's writing past i_size.

---
 fs/gfs2/file.c |   62 +++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 10 deletions(-)
fs/gfs2/file.c +52 -10
Index: gfs2-2.6-nmw/fs/gfs2/file.c
===================================================================
@@ -617,18 +617,55 @@ static ssize_t gfs2_file_aio_write(struc
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static void empty_write_end(struct page *page, unsigned from,
-			   unsigned to)
+static int empty_write_end(struct page *page, unsigned from,
+			   unsigned to, int mode)
 {
-	struct gfs2_inode *ip = GFS2_I(page->mapping->host);
+	struct inode *inode = page->mapping->host;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct buffer_head *bh;
+	int waiting = 0;
+	unsigned offset, blksize = 1 << inode->i_blkbits;
+	loff_t i_size = i_size_read(inode);
+	pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
 
 	zero_user(page, from, to-from);
 	mark_page_accessed(page);
 
-	if (!gfs2_is_writeback(ip))
-		gfs2_page_add_databufs(ip, page, from, to);
+ 	if (page->index < end_index || !(mode & FALLOC_FL_KEEP_SIZE)) {
+		if (!gfs2_is_writeback(ip))
+			gfs2_page_add_databufs(ip, page, from, to);
 
-	block_commit_write(page, from, to);
+		block_commit_write(page, from, to);
+		return 0;
+	}
+
+second_pass:
+	offset = 0;
+	bh = page_buffers(page);
+	while (offset < from) {
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	while (offset < to) {
+		if (waiting){
+			wait_on_buffer(bh);
+			if (!buffer_uptodate(bh))
+				return -EIO;
+		}
+		else {
+			set_buffer_uptodate(bh);
+			mark_buffer_dirty(bh);
+			clear_buffer_new(bh);
+			write_dirty_buffer(bh, WRITE);
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	if (!waiting) {
+		waiting = 1;
+		goto second_pass;
+	}
+	return 0;
 }
 
 static int needs_empty_write(sector_t block, struct inode *inode)
@@ -643,7 +680,8 @@ static int needs_empty_write(sector_t bl
 	return !buffer_mapped(&bh_map);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
+			      int mode)
 {
 	struct inode *inode = page->mapping->host;
 	unsigned start, end, next, blksize;
@@ -668,7 +706,9 @@ static int write_empty_blocks(struct pag
 							  gfs2_block_map);
 				if (unlikely(ret))
 					return ret;
-				empty_write_end(page, start, end);
+				ret = empty_write_end(page, start, end, mode);
+				if (unlikely(ret))
+					return ret;
 				end = 0;
 			}
 			start = next;
@@ -682,7 +722,9 @@ static int write_empty_blocks(struct pag
 		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
 		if (unlikely(ret))
 			return ret;
-		empty_write_end(page, start, end);
+		ret = empty_write_end(page, start, end, mode);
+		if (unlikely(ret))
+			return ret;
 	}
 
 	return 0;
@@ -731,7 +773,7 @@ static int fallocate_chunk(struct inode 
 
 		if (curr == end)
 			to = end_offset;
-		error = write_empty_blocks(page, from, to);
+		error = write_empty_blocks(page, from, to, mode);
 		if (!error && offset + to > inode->i_size &&
 		    !(mode & FALLOC_FL_KEEP_SIZE)) {
 			i_size_write(inode, offset + to);
#1 lore raw

PATCH 1/1 GFS2: directly write blocks past i_size

Hi,

Quoted 11 lines · Benjamin Marzinski

GFS2 was relying on the writepage code to write out the zeroed data for fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size. If it is, it will be ignored. To work around this, gfs2 now calls write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE is set, and it's writing past i_size.

---
 fs/gfs2/file.c |   62 +++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 10 deletions(-)

Generally looks good, but a few minor points....

Quoted 40 lines

Index: gfs2-2.6-nmw/fs/gfs2/file.c
===================================================================

fs/gfs2/file.c +20 -6
@@ -617,18 +617,55 @@ static ssize_t gfs2_file_aio_write(struc
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static void empty_write_end(struct page *page, unsigned from,
-			   unsigned to)
+static int empty_write_end(struct page *page, unsigned from,
+			   unsigned to, int mode)
 {
-	struct gfs2_inode *ip = GFS2_I(page->mapping->host);
+	struct inode *inode = page->mapping->host;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct buffer_head *bh;
+	int waiting = 0;
+	unsigned offset, blksize = 1 << inode->i_blkbits;
+	loff_t i_size = i_size_read(inode);
+	pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
 
 	zero_user(page, from, to-from);
 	mark_page_accessed(page);
 
-	if (!gfs2_is_writeback(ip))
-		gfs2_page_add_databufs(ip, page, from, to);
+ 	if (page->index < end_index || !(mode & FALLOC_FL_KEEP_SIZE)) {
+		if (!gfs2_is_writeback(ip))
+			gfs2_page_add_databufs(ip, page, from, to);
 
-	block_commit_write(page, from, to);
+		block_commit_write(page, from, to);
+		return 0;
+	}
+
+second_pass:
+	offset = 0;
+	bh = page_buffers(page);
+	while (offset < from) {

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 655

Quoted 10 lines
fs/gfs2/file.c +10 -0
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	while (offset < to) {
+		if (waiting){
+			wait_on_buffer(bh);
+			if (!buffer_uptodate(bh))
+				return -EIO;
+		}
+		else {

The else should start on the line above to make it more obvious.

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 659

Quoted 4 lines
fs/gfs2/file.c +4 -0
+			set_buffer_uptodate(bh);
+			mark_buffer_dirty(bh);
+			clear_buffer_new(bh);
+			write_dirty_buffer(bh, WRITE);

Should this be WRITE_SYNC or WRITE_SYNC_PLUG I wonder?

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 667

Quoted 8 lines
fs/gfs2/file.c +8 -0
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	if (!waiting) {
+		waiting = 1;
+		goto second_pass;
+	}

I think the code might be a bit cleaner if it was just written as two loops, one after the other since most of the loop content seems to be different according to weather "waiting" is set or not.

Otherwise I think this is a good solution,

Steve.

Quoted 46 lines
fs/gfs2/file.c +10 -4
+	return 0;
 }
 
 static int needs_empty_write(sector_t block, struct inode *inode)
@@ -643,7 +680,8 @@ static int needs_empty_write(sector_t bl
 	return !buffer_mapped(&bh_map);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
+			      int mode)
 {
 	struct inode *inode = page->mapping->host;
 	unsigned start, end, next, blksize;
@@ -668,7 +706,9 @@ static int write_empty_blocks(struct pag
 							  gfs2_block_map);
 				if (unlikely(ret))
 					return ret;
-				empty_write_end(page, start, end);
+				ret = empty_write_end(page, start, end, mode);
+				if (unlikely(ret))
+					return ret;
 				end = 0;
 			}
 			start = next;
@@ -682,7 +722,9 @@ static int write_empty_blocks(struct pag
 		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
 		if (unlikely(ret))
 			return ret;
-		empty_write_end(page, start, end);
+		ret = empty_write_end(page, start, end, mode);
+		if (unlikely(ret))
+			return ret;
 	}
 
 	return 0;
@@ -731,7 +773,7 @@ static int fallocate_chunk(struct inode 
 
 		if (curr == end)
 			to = end_offset;
-		error = write_empty_blocks(page, from, to);
+		error = write_empty_blocks(page, from, to, mode);
 		if (!error && offset + to > inode->i_size &&
 		    !(mode & FALLOC_FL_KEEP_SIZE)) {
 			i_size_write(inode, offset + to);
#2 lore raw

PATCH 1/1 GFS2: directly write blocks past i_size

Quoted 86 lines · Steven Whitehouse

Hi,

Quoted 11 lines · Benjamin Marzinski

GFS2 was relying on the writepage code to write out the zeroed data for fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size. If it is, it will be ignored. To work around this, gfs2 now calls write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE is set, and it's writing past i_size.

---
 fs/gfs2/file.c |   62 +++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 10 deletions(-)

Generally looks good, but a few minor points....

Quoted 40 lines

Index: gfs2-2.6-nmw/fs/gfs2/file.c
===================================================================

fs/gfs2/file.c +20 -6
@@ -617,18 +617,55 @@ static ssize_t gfs2_file_aio_write(struc
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static void empty_write_end(struct page *page, unsigned from,
-			   unsigned to)
+static int empty_write_end(struct page *page, unsigned from,
+			   unsigned to, int mode)
 {
-	struct gfs2_inode *ip = GFS2_I(page->mapping->host);
+	struct inode *inode = page->mapping->host;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct buffer_head *bh;
+	int waiting = 0;
+	unsigned offset, blksize = 1 << inode->i_blkbits;
+	loff_t i_size = i_size_read(inode);
+	pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
 
 	zero_user(page, from, to-from);
 	mark_page_accessed(page);
 
-	if (!gfs2_is_writeback(ip))
-		gfs2_page_add_databufs(ip, page, from, to);
+ 	if (page->index < end_index || !(mode & FALLOC_FL_KEEP_SIZE)) {
+		if (!gfs2_is_writeback(ip))
+			gfs2_page_add_databufs(ip, page, from, to);
 
-	block_commit_write(page, from, to);
+		block_commit_write(page, from, to);
+		return 0;
+	}
+
+second_pass:
+	offset = 0;
+	bh = page_buffers(page);
+	while (offset < from) {

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 655

Quoted 10 lines
fs/gfs2/file.c +10 -0
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	while (offset < to) {
+		if (waiting){
+			wait_on_buffer(bh);
+			if (!buffer_uptodate(bh))
+				return -EIO;
+		}
+		else {

The else should start on the line above to make it more obvious.

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 659

Quoted 4 lines
fs/gfs2/file.c +4 -0
+			set_buffer_uptodate(bh);
+			mark_buffer_dirty(bh);
+			clear_buffer_new(bh);
+			write_dirty_buffer(bh, WRITE);

Should this be WRITE_SYNC or WRITE_SYNC_PLUG I wonder?

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 667

Quoted 8 lines
fs/gfs2/file.c +8 -0
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	if (!waiting) {
+		waiting = 1;
+		goto second_pass;
+	}

I think the code might be a bit cleaner if it was just written as two loops, one after the other since most of the loop content seems to be different according to weather "waiting" is set or not.

Quoted 4 lines

Otherwise I think this is a good solution,

Steve.

Sure. This patch kept evolving, and I probably should have given it a better cleanup once I was satisfied that it worked. I send off a new version.

-Ben

Quoted 47 lines
Quoted 46 lines
fs/gfs2/file.c +10 -4
+	return 0;
 }
 
 static int needs_empty_write(sector_t block, struct inode *inode)
@@ -643,7 +680,8 @@ static int needs_empty_write(sector_t bl
 	return !buffer_mapped(&bh_map);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
+			      int mode)
 {
 	struct inode *inode = page->mapping->host;
 	unsigned start, end, next, blksize;
@@ -668,7 +706,9 @@ static int write_empty_blocks(struct pag
 							  gfs2_block_map);
 				if (unlikely(ret))
 					return ret;
-				empty_write_end(page, start, end);
+				ret = empty_write_end(page, start, end, mode);
+				if (unlikely(ret))
+					return ret;
 				end = 0;
 			}
 			start = next;
@@ -682,7 +722,9 @@ static int write_empty_blocks(struct pag
 		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
 		if (unlikely(ret))
 			return ret;
-		empty_write_end(page, start, end);
+		ret = empty_write_end(page, start, end, mode);
+		if (unlikely(ret))
+			return ret;
 	}
 
 	return 0;
@@ -731,7 +773,7 @@ static int fallocate_chunk(struct inode 
 
 		if (curr == end)
 			to = end_offset;
-		error = write_empty_blocks(page, from, to);
+		error = write_empty_blocks(page, from, to, mode);
 		if (!error && offset + to > inode->i_size &&
 		    !(mode & FALLOC_FL_KEEP_SIZE)) {
 			i_size_write(inode, offset + to);
#3 lore raw

PATCH 1/1 GFS2: directly write blocks past i_size

In reply to Steven Whitehouse
Quoted 2 lines

Should this be WRITE_SYNC or WRITE_SYNC_PLUG I wonder?

I tried these, but they didn't cause any improvement. That doesn't seem terribly surprising, since they both set NOIDLE, which tells the cfq scheduler not to wait for more IO from this process. I event tried sending all the buffers except the last with WRITE_ODIRECT_PLUG, and then the last buffer from each page with WRITE_SYNC, which seems like it should work better, but in all the tests I did, it didn't appear to make any difference. I'm going to come back to this code after the release, and see if I can find any way to make back some of the lost performance.

As it is right now, fallocates that grow i_size are doing better than double the speed of dd. fallocates that go past i_size are an order of magnitude slower than dd. But at least they work correctly.

Quoted 63 lines

fs/gfs2/file.c static ssize_t gfs2_file_aio_write(struc · line 667

Quoted 8 lines
fs/gfs2/file.c +8 -0
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	if (!waiting) {
+		waiting = 1;
+		goto second_pass;
+	}

I think the code might be a bit cleaner if it was just written as two loops, one after the other since most of the loop content seems to be different according to weather "waiting" is set or not.

Otherwise I think this is a good solution,

Steve.

Quoted 46 lines
fs/gfs2/file.c +10 -4
+	return 0;
 }
 
 static int needs_empty_write(sector_t block, struct inode *inode)
@@ -643,7 +680,8 @@ static int needs_empty_write(sector_t bl
 	return !buffer_mapped(&bh_map);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
+			      int mode)
 {
 	struct inode *inode = page->mapping->host;
 	unsigned start, end, next, blksize;
@@ -668,7 +706,9 @@ static int write_empty_blocks(struct pag
 							  gfs2_block_map);
 				if (unlikely(ret))
 					return ret;
-				empty_write_end(page, start, end);
+				ret = empty_write_end(page, start, end, mode);
+				if (unlikely(ret))
+					return ret;
 				end = 0;
 			}
 			start = next;
@@ -682,7 +722,9 @@ static int write_empty_blocks(struct pag
 		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
 		if (unlikely(ret))
 			return ret;
-		empty_write_end(page, start, end);
+		ret = empty_write_end(page, start, end, mode);
+		if (unlikely(ret))
+			return ret;
 	}
 
 	return 0;
@@ -731,7 +773,7 @@ static int fallocate_chunk(struct inode 
 
 		if (curr == end)
 			to = end_offset;
-		error = write_empty_blocks(page, from, to);
+		error = write_empty_blocks(page, from, to, mode);
 		if (!error && offset + to > inode->i_size &&
 		    !(mode & FALLOC_FL_KEEP_SIZE)) {
 			i_size_write(inode, offset + to);