Skip to contentSkip to conversation

snd-hda-codec-realtek: Add quirk for Jetway NF92

PATCH In review Forest Bond 3 participants 6 messages Mar 28, 2011 – Mar 29, 2011 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 snd-hda-codec-realtek: Add quirk for Jetway NF92

The Jetway NF92 mainboard works with model=3stack-6ch-dig. Add a quirk to automatically configure the codec accordingly.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
sound/pci/hda/patch_realtek.c +1 -0
index f1a03f2..6cc8378 100644
@@ -18777,6 +18777,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x",
 			   ALC663_ASUS_H13),
 	SND_PCI_QUIRK(0x1991, 0x5628, "Ordissimo EVE", ALC662_LENOVO_101E),
+	SND_PCI_QUIRK(0x16f3, 0xa625, "Jetway NF92", ALC662_3ST_6ch_DIG),
 	{}
 };
 
Signature · 1 line
1.7.0.4

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#1 lore raw

At Mon, 28 Mar 2011 14:43:07 -0400,

Quoted 3 lines · Forest Bond

The Jetway NF92 mainboard works with model=3stack-6ch-dig. Add a quirk to automatically configure the codec accordingly.

So, the auto-parser didn't work properly for your mobo? How?

thanks,

Takashi

#2 lore raw

Hi Takashi,

Quoted 7 lines · Takashi Iwai

At Mon, 28 Mar 2011 14:43:07 -0400,

Quoted 3 lines · Forest Bond

The Jetway NF92 mainboard works with model=3stack-6ch-dig. Add a quirk to automatically configure the codec accordingly.

So, the auto-parser didn't work properly for your mobo? How?

Please disregard my patch (see my e-mail to Paul for further explanation).

Thanks,
Forest

Signature · 3 lines
Forest Bond
http://www.alittletooquiet.net
http://www.pytagsfs.org

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw
In reply to Forest Bond

Dear Forest,

Am Montag, den 28.03.2011, 14:43 -0400 schrieb Forest Bond:

Quoted 1 line

The Jetway NF92 mainboard works with model=3stack-6ch-dig.

what did not work before?

To provide additional information please run alsa-info.sh [1] with the standard configuration and with your quirk applied and attach both outputs.

Quoted 3 lines

Add a quirk to automatically configure the codec accordingly.

Please make sure that your From line and Signed-of-by line match.

Quoted 9 lines
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
sound/pci/hda/patch_realtek.c +0 -0
index f1a03f2..6cc8378 100644

sound/pci/hda/patch_realtek.c static struct snd_pci_quirk alc662_cfg_tbl[] = { · line 18782

Quoted 6 lines
sound/pci/hda/patch_realtek.c +1 -0
@@ -18777,6 +18777,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x",
 			   ALC663_ASUS_H13),
 	SND_PCI_QUIRK(0x1991, 0x5628, "Ordissimo EVE", ALC662_LENOVO_101E),
+	SND_PCI_QUIRK(0x16f3, 0xa625, "Jetway NF92", ALC662_3ST_6ch_DIG),
 	{}
 };

Thanks,

Paul

[1] http://alsa-project.org/main/index.php/Help_To_Debug

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw

Hi Paul,

Thanks for your reply.

Quoted 4 lines · Paul Menzel

Am Montag, den 28.03.2011, 14:43 -0400 schrieb Forest Bond:

Quoted 1 line

The Jetway NF92 mainboard works with model=3stack-6ch-dig.

what did not work before?

My testing notes say that the S/PDIF output did not work and the analog audio was too quiet, but I'm no longer able to replicate. Maybe I made a mistake during testing.

Please disregard the patch. Everything seems to be working fine without it.

Quoted 5 lines
Quoted 3 lines

Add a quirk to automatically configure the codec accordingly.

Please make sure that your From line and Signed-of-by line match.

Okay. I generated the patch on my work machine but my list membership is with my personal address. I think I can fix this by putting a From: line in the message body (that's what some experimentation with git send-email suggests).

Thanks,
Forest

Signature · 3 lines
Forest Bond
http://www.alittletooquiet.net
http://www.pytagsfs.org

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw

Dear Forest,

thank you for reporting back.

Am Dienstag, den 29.03.2011, 09:36 -0400 schrieb Forest Bond:

Quoted 11 lines · Paul Menzel
Quoted 4 lines

Am Montag, den 28.03.2011, 14:43 -0400 schrieb Forest Bond:

Quoted 1 line

The Jetway NF92 mainboard works with model=3stack-6ch-dig.

what did not work before?

My testing notes say that the S/PDIF output did not work and the analog audio was too quiet, but I'm no longer able to replicate. Maybe I made a mistake during testing.

Please disregard the patch. Everything seems to be working fine without it.

Great.

Quoted 9 lines
Quoted 5 lines
Quoted 3 lines

Add a quirk to automatically configure the codec accordingly.

Please make sure that your From line and Signed-of-by line match.

Okay. I generated the patch on my work machine but my list membership is with my personal address. I think I can fix this by putting a From: line in the message body (that's what some experimentation with git send-email suggests).

I think that is the way to do it.

Thanks,

Paul

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel