e-image-core: task rootfs fails because dependency `evas-engine-gl-x11` is not satisfied
Dear OE folks,
task rootfs of bitbake e-image-core with minimal for MACHINE = "beagleboard" fails with the following error message.
[…]
Configuring eglibc-localedata-i18n.
Configuring xf86-input-mouse.
Configuring udev.
Configuring tinylogin.
Configuring xf86-input-evdev.
Configuring sysvinit.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for task-e-x11-core:
* evas-engine-gl-x11 *
* opkg_install_cmd: Cannot install package task-e-x11-core.
* resolve_conffiles: Existing conffile /oe/build-minimal-eglibc/minimal-dev/rootfs/e-image-core/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /oe/build-minimal-eglibc/minimal-dev/rootfs/e-image-core/etc/device_table-opkg.
How can this dependency be satisfied?
recipes/tasks/task-e-x11.bb runtime depends on expedite which in return runtime depends on evas-engine-gl-x11. Where is the problem?
Thanks,
Paul
Hi,
Quoted 12 lines · Paul Menzel
task rootfs of
bitbake e-image-corewithminimalforMACHINE = "beagleboard"fails with the following error message.[…]
Configuring eglibc-localedata-i18n.
Configuring xf86-input-mouse.
Configuring udev.
Configuring tinylogin.
Configuring xf86-input-evdev.
Configuring sysvinit.
Collected errors:
*satisfy_dependencies_for: Cannot satisfy the following
Quoted 8 lines
dependencies for task-e-x11-core:
* evas-engine-gl-x11 *
*opkg_install_cmd: Cannot install package task-e-x11-core.
*resolve_conffiles: Existing conffile
/oe/build-minimal-eglibc/minimal-dev/rootfs/e-image-core/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /oe/build-minimal-eglibc/minimal-dev/rootfs/e-image-core/etc/device_table-opkg.
Seen exactly the same issue with omap4430-panda aka pandaboard as MACHINE
Quoted 4 lines
How can this dependency be satisfied?
recipes/tasks/task-e-x11.bbruntime depends onexpeditewhich in return runtime depends onevas-engine-gl-x11. Where is the problem?
I suspected something wrong with the evas build, but in the evas.inc there is this as extra OE_CONF --enable-gl-x11 so I would expect the package to be built.
Somehow it doesn't. I guess the problem lies there... Have not found the solution though.
Cheers,
Philippe