Make all it87 drivers SMP safe
v4 cover Make all it87 drivers SMP safe
There are 3 different drivers that touch the it87 hardware registers. The 3 drivers have been written independently and access the it87 hardware registers assuming they are the only driver accessing it. This change attempts to serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. The use of the above macro makes it possible to get rid of spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers. This also greatly simplifies the implementation of it87_wdt.c driver.
01 - Changes to it87 watchdog driver to use "request_muxed_region"
drivers/watchdog/it8712f_wdt.c drivers/watchdog/it87_wdt.c
02 - Chages to hwmon it87 driver to use "request_muxed_region"
drivers/hwmon/it87.c
drivers/hwmon/it87.c | 4 ++++ drivers/watchdog/it8712f_wdt.c | 9 ++++----- drivers/watchdog/it87_wdt.c | 39 ++++----------------------------------- 3 files changed, 12 insertions(+), 40 deletions(-)
Patch History:
v4:
- Remove extra braces in superio_enter routines.
v3:
- Totally abandon the spinlock based approach and use "request_muxed_region" to hold off requestors if the resource is busy.
v2:
- More verbose patch headers. Add In-Reply-To: field.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
PATCH v4 1/2 Use "request_muxed_region" in it87 watchdog drivers
01 - Changes to it87 watchdog driver to use "request_muxed_region" Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy.
The use of the above macro makes it possible to get rid of spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers. This also greatly simplifies the implementation of it87_wdt.c driver.
---
drivers/watchdog/it8712f_wdt.c +4 -5
@@ -51,7 +51,6 @@ MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");static unsigned long wdt_open;static unsigned expect_close; -static spinlock_t io_lock;static unsigned char revision;/* Dog Food address - We use the game port address */
@@ -123,7 +122,9 @@ static inline void superio_select(int ldn)static inline void superio_enter (void ) { -spin_lock (&io_lock); +while (!request_muxed_region (REG ,2 ,NAME )) +continue ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );
@@ -134,7 +135,7 @@ static inline void superio_exit(void) {outb (0x02 ,REG );outb (0x02 ,VAL ); -spin_unlock (&io_lock); +release_region (REG ,2 ); }static inline void it8712f_wdt_ping (void )
@@ -382,8 +383,6 @@ static int __init it8712f_wdt_init(void) {int err =0 ; -spin_lock_init (&io_lock); -if (it8712f_wdt_find (&address))return -ENODEV ;
drivers/watchdog/it87_wdt.c +4 -35
@@ -137,7 +137,6 @@static unsigned int base, gpact, ciract, max_units, chip_type;static unsigned long wdt_status; -static DEFINE_SPINLOCK (spinlock);static int nogameport =DEFAULT_NOGAMEPORT ;static int exclusive =DEFAULT_EXCLUSIVE ;
@@ -165,6 +164,9 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="static inline void superio_enter (void ) { +while (!request_muxed_region (REG ,2 ,WATCHDOG_NAME )) +continue ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );
@@ -175,6 +177,7 @@ static inline void superio_exit(void) {outb (0x02 ,REG );outb (0x02 ,VAL ); +release_region (REG ,2 ); }static inline void superio_select (int ldn)
@@ -257,9 +260,6 @@ static void wdt_keepalive(void)static void wdt_start (void ) { -unsigned long flags; - -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (GPIO );
@@ -270,14 +270,10 @@ static void wdt_start(void)wdt_update_timeout ();superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }static void wdt_stop (void ) { -unsigned long flags; - -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (GPIO );
@@ -288,7 +284,6 @@ static void wdt_stop(void)superio_outb (0x00 ,WDTVALMSB );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }/**
@@ -303,8 +298,6 @@ static void wdt_stop(void)static int wdt_set_timeout (int t) { -unsigned long flags; -if (t <1 || t > max_units *60 )return -EINVAL ;
@@ -313,14 +306,12 @@ static int wdt_set_timeout(int t)else timeout = t; -spin_lock_irqsave (&spinlock, flags);if (test_bit (WDTS_TIMER_RUN , &wdt_status)) {superio_enter ();superio_select (GPIO );wdt_update_timeout ();superio_exit (); } -spin_unlock_irqrestore (&spinlock, flags);return 0 ; }
@@ -339,11 +330,8 @@ static int wdt_set_timeout(int t)static int wdt_get_status (int *status) { -unsigned long flags; - *status =0 ;if (testmode) { -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (GPIO );if (superio_inb (WDTCTRL ) &WDT_ZERO ) {
@@ -353,7 +341,6 @@ static int wdt_get_status(int *status) }superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }if (test_and_clear_bit (WDTS_KEEPALIVE , &wdt_status)) *status |=WDIOF_KEEPALIVEPING ;
@@ -560,16 +547,13 @@ static int __init it87_wdt_init(void)int rc =0 ;int try_gameport = !nogameport;u8 chip_rev; -unsigned long flags; wdt_status =0 ; -spin_lock_irqsave (&spinlock, flags);superio_enter (); chip_type =superio_inw (CHIPID ); chip_rev =superio_inb (CHIPREV ) &0x0f ;superio_exit (); -spin_unlock_irqrestore (&spinlock, flags);switch (chip_type) {case IT8702_ID :
@@ -603,7 +587,6 @@ static int __init it87_wdt_init(void)return -ENODEV ; } -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (GPIO );
@@ -621,14 +604,12 @@ static int __init it87_wdt_init(void) gpact =superio_inb (ACTREG );superio_outb (0x01 ,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags);if (request_region (base,1 ,WATCHDOG_NAME ))set_bit (WDTS_USE_GP , &wdt_status);else rc = -EIO ; }else {superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }/* If we haven't Gameport support, try to get CIR support */
@@ -646,7 +627,6 @@ static int __init it87_wdt_init(void) goto err_out; } base =CIR_BASE ; -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (CIR );
@@ -660,7 +640,6 @@ static int __init it87_wdt_init(void) }superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }if (timeout <1 || timeout > max_units *60 ) {
@@ -711,21 +690,17 @@ err_out_reboot: err_out_region:release_region (base,test_bit (WDTS_USE_GP , &wdt_status) ?1 :8 );if (!test_bit (WDTS_USE_GP , &wdt_status)) { -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (CIR );superio_outb (ciract,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); } err_out:if (try_gameport) { -spin_lock_irqsave (&spinlock, flags);superio_enter ();superio_select (GAMEPORT );superio_outb (gpact,ACTREG );superio_exit (); -spin_unlock_irqrestore (&spinlock, flags); }return rc;
@@ -733,10 +708,6 @@ err_out: static void __exit it87_wdt_exit(void) { -unsigned long flags; -int nolock; - - nolock = !spin_trylock_irqsave (&spinlock, flags);superio_enter ();superio_select (GPIO );superio_outb (0x00 ,WDTCTRL );
@@ -752,8 +723,6 @@ static void __exit it87_wdt_exit(void)superio_outb (ciract,ACTREG ); }superio_exit (); -if (!nolock) -spin_unlock_irqrestore (&spinlock, flags);misc_deregister (&wdt_miscdev);unregister_reboot_notifier (&wdt_notifier);
Signature · 7 lines
1.7.3.1 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [PATCH v4 1/2] Use "request_muxed_region" in it87 watchdog drivers
drivers/watchdog/it8712f_wdt.c static inline void superio_select(int ldn) · line 127
Quoted 3 lines
drivers/watchdog/it8712f_wdt.c +3
-0+while (!request_muxed_region (REG ,2 ,NAME )) +continue ; +
This shouldn't need the loop ? - is it only working with the loop present ?
Otherwise this looks good - I'd just like to understand if the loop was needed (indicating a bug has crept into the muxed alloc code somewhere perhaps) or not
Alan
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [PATCH v4 1/2] Use "request_muxed_region" in it87 watchdog drivers
Alan,
I looked at your code in kernel/resource.c and I agree the while
is not needed. I guess every time it comes back from "schedule" your code loops back to reserve the region. I will test the code without the while and make the needed change.
Regards
Nat
Quoted 14 lines · Alan Cox
Quoted 3 lines
+ while (!request_muxed_region(REG, 2, NAME))
+ continue;
+This shouldn't need the loop ? - is it only working with the loop present ?
Otherwise this looks good - I'd just like to understand if the loop was needed (indicating a bug has crept into the muxed alloc code somewhere perhaps) or not
Alan
Signature · 7 lines
Regards Nat Gurumoorthy AB6SJ _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
PATCH v4 2/2 Use "request_muxed_region" in it87 hwmon drivers
In reply to Nat Gurumoorthy02 - Chages to hwmon it87 driver to use "request_muxed_region" Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy.
---
drivers/hwmon/it87.c +4 -0
@@ -111,6 +111,9 @@ superio_select(int ldn)static inline void superio_enter (void ) { +while (!request_muxed_region (REG ,2 ,DRVNAME )) +continue ; +outb (0x87 ,REG );outb (0x01 ,REG );outb (0x55 ,REG );
@@ -122,6 +125,7 @@ superio_exit(void) {outb (0x02 ,REG );outb (0x02 ,VAL ); +release_region (REG ,2 ); }/* Logical device 4 registers */
Signature · 7 lines
1.7.3.1 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors