Skip to contentSkip to conversation

regulator: Remove MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros

PATCH Superseded Axel Lin 1 participant 1 message May 16, 2011

Subsystems (2)
Multifunction devices (MFD) Voltage and current regulator framework
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: Remove MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros

Quoted 1 line

From 4a240fc9dece6c03e87a7d20c7c468285891853f Mon Sep 17 00:00:00 2001

In current implementation, the original macro implementation assumes the caller pass the parameter starting from 1 (to match the register names in datasheet). Thus we have unneeded plus one then minus one operations
when using MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros.

This patch removes these macros to avoid unneeded plus one then minus one operations without reducing readability.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/max8997.c         |   12 ++++++------
 include/linux/mfd/max8997-private.h |    4 ----
 2 files changed, 6 insertions(+), 10 deletions(-)
drivers/regulator/max8997.c +6 -6
index b1c1444..10d5a1d 100644
@@ -1032,11 +1032,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 
 	/* For the safety, set max voltage before setting up */
 	for (i = 0; i < 8; i++) {
-		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
 				max_buck1, 0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
 				max_buck2, 0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
 				max_buck5, 0x3f);
 	}
 

@@ -1113,13 +1113,13 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 
 	/* Initialize all the DVS related BUCK registers */
 	for (i = 0; i < 8; i++) {
-		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
 				max8997->buck1_vol[i],
 				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
 				max8997->buck2_vol[i],
 				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1),
+		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
 				max8997->buck5_vol[i],
 				0x3f);
 	}
include/linux/mfd/max8997-private.h +0 -4
index 69d1010..5ff2400 100644
@@ -311,10 +311,6 @@ enum max8997_irq {
 	MAX8997_IRQ_NR,
 };
 
-#define MAX8997_REG_BUCK1DVS(x)	(MAX8997_REG_BUCK1DVS1 + (x) - 1)
-#define MAX8997_REG_BUCK2DVS(x)	(MAX8997_REG_BUCK2DVS1 + (x) - 1)
-#define MAX8997_REG_BUCK5DVS(x)	(MAX8997_REG_BUCK5DVS1 + (x) - 1)
-
 #define MAX8997_NUM_GPIO	12
 struct max8997_dev {
 	struct device *dev;
Signature · 1 line
1.7.1