Skip to contentSkip to conversation

msmfb issues on trout(htc dream)

DISCUSSION Denis 'GNUtoo' Carikli 2 participants 3 messages May 25, 2011 – May 26, 2011 Arm Qualcomm mailing list

lore
Share & tools
lore
#0 lore raw

hi, I've tried booting linux-next on the htc dream again, and I have some very quick dmesg messages and at the end I can see that:

Quoted 10 lines

mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
r7:c6039ed0
[<c004b7b8>] (do_group_exit+0x0/0x378)
r4:0839998f
[<c0057064>] (get_signal_to_deliver+0x0/0x378) from [<c002f354>] (do_signal+0x98/0x52c)
mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
[<c002f2bc>] (do_signal+0x00/0x52c) from [<c002fcd0>] (work_pending

+0x24/0x28)

Quoted 4 lines

mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
r4:000ad0d8
msmfb_start_dma 92.050 ms after vsync request

I've also MMC issues but without fixing theses error first since it will displays even more garbage(since the msmfb and the mmc error are both printed to the screen)

Denis.

#1 lore raw
Quoted 12 lines · Denis 'GNUtoo' Carikli

hi, I've tried booting linux-next on the htc dream again, and I have some very quick dmesg messages and at the end I can see that:

Quoted 10 lines

mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
r7:c6039ed0
[<c004b7b8>] (do_group_exit+0x0/0x378)
r4:0839998f
[<c0057064>] (get_signal_to_deliver+0x0/0x378) from [<c002f354>] (do_signal+0x98/0x52c)
mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
[<c002f2bc>] (do_signal+0x00/0x52c) from [<c002fcd0>] (work_pending

Quoted 8 lines

+0x24/0x28)

Quoted 4 lines

mdp irq already on already on 4 4
mdp_dma_to_mddi: busy
r4:000ad0d8
msmfb_start_dma 92.050 ms after vsync request

I've also MMC issues but without fixing theses error first since it will displays even more garbage(since the msmfb and the mmc error are both printed to the screen)

I guess the first question is which framebuffer driver are you using? There's one in drivers/staging/msm and another one in drivers/video/msm. The staging one hasn't been updated in a while, but at least used to work on the dream. I'm not sure if the video/msm driver has been tested on the dream (or even the MSM7201A). I've CC'd Carl to see if he has any knowledge about this.

It is possible to use a serial console on the Dream, but the cables are hard to come buy, but
<http://www.instructables.com/id/Android-G1-Serial-Cable/> can be useful. I recommend initially just hooking up the serial transmit line, since overdriving the receiver can damage it.

It's kind of unfortunate that most of the people working on the MSM support code tend to just work on the newer targets and it seems the older targets break easily. Hopefully we can figure out what is happening here.

David

Signature · 2 lines
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
#2 lore raw
Quoted 1 line

I guess the first question is which framebuffer driver are you using?

The normal one(not the staging one)

Quoted 5 lines

There's one in drivers/staging/msm and another one in drivers/video/msm. The staging one hasn't been updated in a while, but at least used to work on the dream. I'm not sure if the video/msm driver has been tested on the dream (or even the MSM7201A). I've CC'd Carl to see if he has any knowledge about this.

Thanks.

Quoted 5 lines

It is possible to use a serial console on the Dream, but the cables are hard to come buy, but
<http://www.instructables.com/id/Android-G1-Serial-Cable/> can be useful. I recommend initially just hooking up the serial transmit line, since overdriving the receiver can damage it.

I tried twice to do a serial cable from a headset and failed twice. I guess that I would need to buy the sparkfun htc-ext adapter.

Denis.