dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
Subsystems (10)
Rob Herring
maintainerPATCH 1/1 dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 + .../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +40 -0
@@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible:
@@ -34,6 +35,45 @@ patternProperties: - fixed-factor-clock allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + - if: properties: compatible:
Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml +10 -0
@@ -22,6 +22,7 @@ properties: patternProperties: "^.*(clk|rst|codec).*$": type: object + unevaluatedProperties: false properties: compatible:
@@ -36,6 +37,15 @@ patternProperties: - compatible allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + - if: properties: compatible:
Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +5 -0
@@ -144,6 +144,7 @@ properties: CODECs digital core if not being provided by an internal regulator. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:
@@ -161,6 +162,7 @@ properties: CODECs MICVDD. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:
@@ -177,6 +179,7 @@ properties: Initialisation data for the MIC1VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:
@@ -202,6 +205,7 @@ properties: Initialisation data for the MIC2VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:
@@ -228,6 +232,7 @@ properties: the CODECs analog and 1.8V digital supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:
Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +4 -3
@@ -71,8 +71,9 @@ properties: regulators: type: object + additionalProperties: false patternProperties: - "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + "^(ldo([1-9]|1[01])|bcore[1-2]|bpro|bmem|bio|bperi)$": $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false
@@ -112,7 +113,7 @@ examples: }; regulators { - regulator-bcore1 { + bcore1 { regulator-name = "BCORE1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1570000>;
@@ -120,7 +121,7 @@ examples: regulator-max-microamp = <2000000>; regulator-boot-on; }; - regulator-ldo11 { + ldo11 { regulator-name = "LDO_11"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3600000>;
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +4 -1
@@ -46,6 +46,7 @@ properties: adc: type: object + additionalProperties: false description: Optional hardware monitoring module properties:
@@ -59,8 +60,9 @@ properties: const: 0 patternProperties: - "^channel@[0-9]+$": + "^channel@[0-9a-f]+$": type: object + additionalProperties: false description: | Properties for a single ADC which can report cooked values (i.e. temperature sensor based on thermister), raw values
@@ -113,6 +115,7 @@ properties: patternProperties: "^fan-controller@[0-9a-f]+$": type: object + additionalProperties: false description: Optional fan controller properties:
Documentation/devicetree/bindings/mfd/maxim,max14577.yaml +1 -0
@@ -39,6 +39,7 @@ properties: extcon: type: object + additionalProperties: false properties: compatible: enum:
Documentation/devicetree/bindings/mfd/maxim,max77843.yaml +1 -0
@@ -32,6 +32,7 @@ properties: motor-driver: type: object + additionalProperties: false properties: compatible: const: maxim,max77843-haptic
Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +2 -0
@@ -87,6 +87,7 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object + unevaluatedProperties: false $ref: ../regulator/regulator.yaml# unevaluatedProperties: false
@@ -111,6 +112,7 @@ properties: additional properties are required for the codec, this node can be omitted. type: object + additionalProperties: false properties: rockchip,mic-in-differential: type: boolean
Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml +1 -0
@@ -42,6 +42,7 @@ properties: vcom: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false description: The regulator for the compenstation voltage. Enabling/disabling this enables/disables the entire device.
Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +4 -0
@@ -46,6 +46,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible:
@@ -60,6 +61,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible:
@@ -70,6 +72,7 @@ properties: timer: type: object + additionalProperties: false properties: compatible:
@@ -81,6 +84,7 @@ properties: patternProperties: "^trigger@[0-9]+$": type: object + additionalProperties: false properties: compatible:
Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +3 -0
@@ -69,6 +69,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible:
@@ -104,6 +105,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible:
@@ -115,6 +117,7 @@ properties: patternProperties: "^timer@[0-9]+$": type: object + additionalProperties: false properties: compatible:
Documentation/devicetree/bindings/mfd/st,stmfx.yaml +1 -0
@@ -57,6 +57,7 @@ properties: patternProperties: "^[a-zA-Z]*-pins$": type: object + additionalProperties: false allOf: - $ref: ../pinctrl/pinmux-node.yaml
Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +22 -0
@@ -51,6 +51,7 @@ properties: provides the reference clock for the entire U8500 system and the DB8500 counterpart. type: object + additionalProperties: false properties: compatible:
@@ -63,6 +64,7 @@ properties: description: Node describing the AB8500 GPIO controller. A few GPIO pins available for misc usage. type: object + additionalProperties: false properties: compatible:
@@ -78,6 +80,7 @@ properties: rtc: description: Node describing the AB8500 battery-backed RTC. type: object + additionalProperties: false properties: compatible:
@@ -337,34 +340,40 @@ properties: description: The voltage for the auxilary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux2: description: The voltage for the auxilary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux3: description: The voltage for the auxilary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux4: description: The voltage for the auxilary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux5: description: The voltage for the auxilary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux6: description: The voltage for the auxilary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false # There is never any AUX7 regulator which is confusing
@@ -373,18 +382,21 @@ properties: only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_intcore: description: The LDO regulator for the internal core voltage of the AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_adc: description: Analog power regulator for the analog to digital converter ADC, only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_tvout: description: The voltage for the TV output regulator, incidentally
@@ -393,33 +405,39 @@ properties: Only present on AB8500. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_audio: description: The LDO regulator for the audio codec output type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic1: description: The LDO regulator for the analog microphone 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic2: description: The LDO regulator for the analog microphone 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_dmic: description: The LDO regulator for the digital microphone only present on AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_ana: description: Analog power regulator for CSI and DSI interfaces, Camera Serial Interface CSI and Display Serial Interface DSI. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible
@@ -442,16 +460,19 @@ properties: description: The voltage for the VSMPS1 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext2: description: The voltage for the VSMPS2 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext3: description: The voltage for the VSMPS3 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible
@@ -462,6 +483,7 @@ patternProperties: "^pwm@[1-9]+?$": type: object $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false description: Represents each of the PWM blocks in the AB8500 properties:
Documentation/devicetree/bindings/mfd/ti,tps65086.yaml +1 -0
@@ -38,6 +38,7 @@ properties: regulators: type: object + additionalProperties: false description: | List of child nodes that specify the regulator initialization data. Child nodes must be named after their hardware counterparts:
Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +1 -0
@@ -260,6 +260,7 @@ properties: "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": $ref: /schemas/regulator/regulator.yaml# type: object + unevaluatedProperties: false properties: regulator-ramp-delay:
Signature · 1 line
2.34.1
Quoted 5 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>
Alistair
Quoted 531 lines
---
.../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 + .../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +0
-0@@ -22,6 +22,7 @@ properties:patternProperties:
"^.*_(clk|rst)$": type: objectDocumentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +40
-0+ unevaluatedProperties: false properties: compatible:@@ -34,6 +35,45 @@ patternProperties: - fixed-factor-clock allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + - if: properties: compatible:Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml +0
-0@@ -22,6 +22,7 @@ properties:patternProperties:
"^.*(clk|rst|codec).*$": type: objectDocumentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml +10
-0+ unevaluatedProperties: false properties: compatible:@@ -36,6 +37,15 @@ patternProperties: - compatible allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + - if: properties: compatible:Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml +5
-0@@ -144,6 +144,7 @@ properties: CODECs digital core if not being provided by an internal regulator. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:@@ -161,6 +162,7 @@ properties: CODECs MICVDD. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:@@ -177,6 +179,7 @@ properties: Initialisation data for the MIC1VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:@@ -202,6 +205,7 @@ properties: Initialisation data for the MIC2VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:@@ -228,6 +232,7 @@ properties: the CODECs analog and 1.8V digital supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum:Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +4
-3@@ -71,8 +71,9 @@ properties: regulators: type: object + additionalProperties: false patternProperties: - "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + "^(ldo([1-9]|1[01])|bcore[1-2]|bpro|bmem|bio|bperi)$": $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false@@ -112,7 +113,7 @@ examples: }; regulators { - regulator-bcore1 { + bcore1 { regulator-name = "BCORE1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1570000>;@@ -120,7 +121,7 @@ examples: regulator-max-microamp = <2000000>; regulator-boot-on; }; - regulator-ldo11 { + ldo11 { regulator-name = "LDO_11"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3600000>;Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +3
-1@@ -46,6 +46,7 @@ properties: adc: type: object + additionalProperties: false description: Optional hardware monitoring module properties:@@ -59,8 +60,9 @@ properties: const: 0 patternProperties: - "^channel@[0-9]+$": + "^channel@[0-9a-f]+$": type: object + additionalProperties: false description: | Properties for a single ADC which can report cooked values (i.e. temperature sensor based on thermister), raw values@@ -113,6 +115,7 @@ properties:patternProperties:
"^fan-controller@[0-9a-f]+$": type: objectDocumentation/devicetree/bindings/mfd/gateworks-gsc.yaml +1
-0+ additionalProperties: false description: Optional fan controller properties:Documentation/devicetree/bindings/mfd/maxim,max14577.yaml +1
-0@@ -39,6 +39,7 @@ properties: extcon: type: object + additionalProperties: false properties: compatible: enum:Documentation/devicetree/bindings/mfd/maxim,max77843.yaml +1
-0@@ -32,6 +32,7 @@ properties: motor-driver: type: object + additionalProperties: false properties: compatible: const: maxim,max77843-hapticDocumentation/devicetree/bindings/mfd/rockchip,rk817.yaml +2
-0@@ -87,6 +87,7 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object + unevaluatedProperties: false $ref: ../regulator/regulator.yaml# unevaluatedProperties: false@@ -111,6 +112,7 @@ properties: additional properties are required for the codec, this node can be omitted. type: object + additionalProperties: false properties: rockchip,mic-in-differential: type: booleanDocumentation/devicetree/bindings/mfd/silergy,sy7636a.yaml +1
-0@@ -42,6 +42,7 @@ properties: vcom: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false description: The regulator for the compenstation voltage. Enabling/disabling this enables/disables the entire device.Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +3
-0@@ -46,6 +46,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible:@@ -60,6 +61,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible:@@ -70,6 +72,7 @@ properties: timer: type: object + additionalProperties: false properties: compatible:@@ -81,6 +84,7 @@ properties:patternProperties:
"^trigger@[0-9]+$": type: objectDocumentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +1
-0+ additionalProperties: false properties: compatible:Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +2
-0@@ -69,6 +69,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible:@@ -104,6 +105,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible:@@ -115,6 +117,7 @@ properties:patternProperties:
"^timer@[0-9]+$": type: objectDocumentation/devicetree/bindings/mfd/st,stm32-timers.yaml +1
-0+ additionalProperties: false properties: compatible:Documentation/devicetree/bindings/mfd/st,stmfx.yaml +1
-0@@ -57,6 +57,7 @@ properties: patternProperties: "^[a-zA-Z]*-pins$": type: object + additionalProperties: false allOf: - $ref: ../pinctrl/pinmux-node.yamlDocumentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +22
-0@@ -51,6 +51,7 @@ properties: provides the reference clock for the entire U8500 system and the DB8500 counterpart. type: object + additionalProperties: false properties: compatible:@@ -63,6 +64,7 @@ properties: description: Node describing the AB8500 GPIO controller. A few GPIO pins available for misc usage. type: object + additionalProperties: false properties: compatible:@@ -78,6 +80,7 @@ properties: rtc: description: Node describing the AB8500 battery-backed RTC. type: object + additionalProperties: false properties: compatible:@@ -337,34 +340,40 @@ properties: description: The voltage for the auxilary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux2: description: The voltage for the auxilary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux3: description: The voltage for the auxilary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux4: description: The voltage for the auxilary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux5: description: The voltage for the auxilary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux6: description: The voltage for the auxilary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false # There is never any AUX7 regulator which is confusing@@ -373,18 +382,21 @@ properties: only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_intcore: description: The LDO regulator for the internal core voltage of the AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_adc: description: Analog power regulator for the analog to digital converter ADC, only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_tvout: description: The voltage for the TV output regulator, incidentally@@ -393,33 +405,39 @@ properties: Only present on AB8500. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_audio: description: The LDO regulator for the audio codec output type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic1: description: The LDO regulator for the analog microphone 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic2: description: The LDO regulator for the analog microphone 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_dmic: description: The LDO regulator for the digital microphone only present on AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_ana: description: Analog power regulator for CSI and DSI interfaces, Camera Serial Interface CSI and Display Serial Interface DSI. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible@@ -442,16 +460,19 @@ properties: description: The voltage for the VSMPS1 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext2: description: The voltage for the VSMPS2 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext3: description: The voltage for the VSMPS3 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible@@ -462,6 +483,7 @@ patternProperties: "^pwm@[1-9]+?$": type: object $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false description: Represents each of the PWM blocks in the AB8500 properties:Documentation/devicetree/bindings/mfd/ti,tps65086.yaml +1
-0@@ -38,6 +38,7 @@ properties: regulators: type: object + additionalProperties: false description: | List of child nodes that specify the regulator initialization data. Child nodes must be named after their hardware counterparts:Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +1
-0@@ -260,6 +260,7 @@ properties: "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": $ref: /schemas/regulator/regulator.yaml# type: object + unevaluatedProperties: false properties: regulator-ramp-delay:Signature · 1 line
2.34.1
Am Dienstag, 23. August 2022, 16:56:35 CEST schrieb Rob Herring:
Quoted 22 lines
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>---
.../bindings/mfd/rockchip,rk817.yaml | 2 +Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +1
-0@@ -87,6 +87,7 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object + unevaluatedProperties: false $ref: ../regulator/regulator.yaml# unevaluatedProperties: false
Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml properties: · line 118
Quoted 7 lines
Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml +1
-0@@ -111,6 +112,7 @@ properties: additional properties are required for the codec, this node can be omitted. type: object + additionalProperties: false properties: rockchip,mic-in-differential: type: boolean
Quoted 5 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>
Yours,
Linus Walleij
Quoted 6 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>---
Best regards,
Krzysztof
Quoted 6 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>---
Thanks,
Charles
Dne torek, 23. avgust 2022 ob 16:56:35 CEST je Rob Herring napisal(a):
Quoted 56 lines
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 + .../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)diff --git
a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yamlb/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yamlindexd131759ccaf3..021d33cb3dd6100644Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +16
-0@@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible:@@ -34,6 +35,45 @@ patternProperties: - fixed-factor-clock allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk +
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml patternProperties: · line 62
Quoted 10 lines
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +10
-0+ then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true + + clocks: + maxItems: 2
Last time node with allwinner,sun4i-a10-mod0-clk compatible was used, it had 3 clocks. See:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/
arm/boot/dts/sun4i-a10.dtsi?id=f18698e1c66338b902de386e4ad97b8b1b9d999d#n406
Once that fixed, allwinner,sun6i-a31-prcm.yaml and allwinner,sun8i-a23- prcm.yaml are:
Best regards,
Jernej
Quoted 17 lines
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +14
-0+ + clock-output-names: + maxItems: 1 + + phandle: true + + required: + - "#clock-cells" + - compatible + - clocks + - clock-output-names + + additionalProperties: false + - if: properties: compatible:
Rob Herring
maintainerQuoted 65 lines · Jernej Škrabec
Dne torek, 23. avgust 2022 ob 16:56:35 CEST je Rob Herring napisal(a):
Quoted 63 lines
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 + .../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)diff --git
a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yamlb/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yamlindexd131759ccaf3..021d33cb3dd6100644Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +23
-0@@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible:@@ -34,6 +35,45 @@ patternProperties: - fixed-factor-clock allOf: + - if: + properties: + compatible: + contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk + + then: + properties: + "#clock-cells": + const: 0 + + # Already checked in the main schema + compatible: true
Quoted 8 lines
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml patternProperties: · line 62
Quoted 3 lines
Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +3
-0+ + clocks: + maxItems: 2Last time node with allwinner,sun4i-a10-mod0-clk compatible was used, it had 3 clocks. See:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/
arm/boot/dts/sun4i-a10.dtsi?id=f18698e1c66338b902de386e4ad97b8b1b9d999d#n406
Humm, we already have constraints in bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml. I'll just make it 'clocks: true' here instead.
Rob
Lee Jones
maintainerQuoted 14 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 +
Quoted 8 lines
.../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)
What are your plans for this set?
Want me to merge it?
Signature · 1 line
Lee Jones [李琼斯]
Rob Herring
maintainerQuoted 25 lines · Lee Jones
Quoted 14 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 +Quoted 8 lines
.../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)
Quoted 3 lines
What are your plans for this set?
Want me to merge it?
Yes, please.
Rob
Quoted 14 lines · Rob Herring
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically).
Signed-off-by Rob Herring <[email protected]>--- .../mfd/allwinner,sun6i-a31-prcm.yaml | 40 +++++++++++++++++++ .../mfd/allwinner,sun8i-a23-prcm.yaml | 10 +++++ .../bindings/mfd/cirrus,lochnagar.yaml | 5 +++ .../devicetree/bindings/mfd/dlg,da9063.yaml | 7 ++-- .../bindings/mfd/gateworks-gsc.yaml | 5 ++- .../bindings/mfd/maxim,max14577.yaml | 1 + .../bindings/mfd/maxim,max77843.yaml | 1 + .../bindings/mfd/rockchip,rk817.yaml | 2 +
Quoted 8 lines
.../bindings/mfd/silergy,sy7636a.yaml | 1 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 ++ .../bindings/mfd/st,stm32-timers.yaml | 3 ++ .../devicetree/bindings/mfd/st,stmfx.yaml | 1 + .../bindings/mfd/stericsson,ab8500.yaml | 22 ++++++++++ .../devicetree/bindings/mfd/ti,tps65086.yaml | 1 + .../bindings/mfd/x-powers,axp152.yaml | 1 + 15 files changed, 100 insertions(+), 4 deletions(-)
Applied, thanks.
Signature · 1 line
Lee Jones [李琼斯]