dependency gui problem

after make build dir, and set env, follow cmd works normally. bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:

the "loading cache" window goes 100% quickly, but after that, the window always be there, and the parent window "dependency explorer" become no-response. I have waited half an hour, and it still there.

, and set env, follow cmd works normally.

Quoted 3 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:

What does "once builded" mean?

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

Quoted 6 lines · NiQingliang

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Can you capture the log and send it. I noticed you are running on ArchLinux, can you confirm which version of Python you are using and which version of Poky you have?

You have to be using 2.6 or 2.7 Python.

Sau!

Quoted 17 lines · Dexuan

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "loading cache" window will work normally, and I can see the progress bar rolling.

but if I issue the cmd second time, it will hang.

Quoted 8 lines · Saul Wold

Quoted 6 lines · NiQingliang

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Quoted 25 lines

Can you capture the log and send it. I noticed you are running on ArchLinux, can you confirm which version of Python you are using and which version of Poky you have?

You have to be using 2.6 or 2.7 Python.

Sau!

Quoted 17 lines · Dexuan

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

Oh, sorry, I have fixed some bug in my description:-)

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "processing recipes" window will work normally, and I can see the progress bar
rolling.

but if I issue the cmd second time, "loading cache" window will hang.

Quoted 56 lines · NiQingliang

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "loading cache" window will work normally, and I can see the progress bar rolling.

but if I issue the cmd second time, it will hang.

Quoted 8 lines · Saul Wold

Quoted 6 lines · NiQingliang

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Quoted 25 lines

Can you capture the log and send it. I noticed you are running on ArchLinux, can you confirm which version of Python you are using and which version of Poky you have?

You have to be using 2.6 or 2.7 Python.

Sau!

Quoted 17 lines · Dexuan

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

Quoted 6 lines

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

I have looked the fiel depexp.py, and have some doubt:

why in "ParseCompleted", the progress bar will hide, but in "CacheLoadCompleted", it will not???????

I don't think these two events need different process.

if isinstance(event, bb.event.CacheLoadCompleted):
gtk.gdk.threads_enter() pbar.update(progress_total, progress_total) gtk.gdk.threads_leave()
continue
.......
if isinstance(event, bb.event.ParseCompleted):
pbar.hide()
continue

Quoted 95 lines · NiQingliang

Oh, sorry, I have fixed some bug in my description:-)

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "processing recipes" window will work normally, and I can see the progress bar
rolling.

but if I issue the cmd second time, "loading cache" window will hang.

Quoted 56 lines · NiQingliang

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "loading cache" window will work normally, and I can see the progress bar rolling.

but if I issue the cmd second time, it will hang.

Quoted 8 lines · Saul Wold

Quoted 6 lines · NiQingliang

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Quoted 25 lines

Can you capture the log and send it. I noticed you are running on ArchLinux, can you confirm which version of Python you are using and which version of Poky you have?

You have to be using 2.6 or 2.7 Python.

Sau!

Quoted 17 lines · Dexuan

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

Quoted 6 lines

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

Quoted 4 lines

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

I have changed that code section, and solved my problem, but I don't know if it is the right way.

            if isinstance(event, bb.event.CacheLoadCompleted):
                 pbar.hide()
                 continue
            .......
            if isinstance(event, bb.event.ParseCompleted):
                 pbar.hide()
                 continue

Quoted 125 lines · NiQingliang

I have looked the fiel depexp.py, and have some doubt:

why in "ParseCompleted", the progress bar will hide, but in "CacheLoadCompleted", it will not???????

I don't think these two events need different process.

if isinstance(event, bb.event.CacheLoadCompleted):
gtk.gdk.threads_enter() pbar.update(progress_total, progress_total) gtk.gdk.threads_leave()
continue
.......
if isinstance(event, bb.event.ParseCompleted):
pbar.hide()
continue

Quoted 95 lines · NiQingliang

Oh, sorry, I have fixed some bug in my description:-)

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "processing recipes" window will work normally, and I can see the progress bar
rolling.

but if I issue the cmd second time, "loading cache" window will hang.

Quoted 56 lines · NiQingliang

I'm using python2.7

I have setup a new file named "python" in build dir, whose content like that:
#!/bin/bash
/usr/bin/env python2 $@

and add the build dir in env var "PATH".

If the python version error, I don't think I can see the GUI of bitbake.

after manually closed gui, the shell output is like attachement.

and I tried like this:
if I change some file in poky's recipes for the conf file, the "loading cache" window will work normally, and I can see the progress bar rolling.

but if I issue the cmd second time, it will hang.

Quoted 8 lines · Saul Wold

Quoted 6 lines · NiQingliang

I have added "-DDD -v", after close window "loading cache" manually, the bitbake exited, and then I can see some DEBUG info on shell, but there is no clue.

how to dig out where it hangs:-(

Quoted 25 lines

Can you capture the log and send it. I noticed you are running on ArchLinux, can you confirm which version of Python you are using and which version of Poky you have?

You have to be using 2.6 or 2.7 Python.

Sau!

Quoted 17 lines · Dexuan

Quoted 15 lines

Quoted 2 lines · NiQingliang

once builded, is after executed "bitbake core-image-minimal" and generated the final image.

I tried that just now on recent poky.git's master branch but can't reproduce the issue. :-( You may need to dig out where it hangs...

Quoted 6 lines · Dexuan

Quoted 5 lines

, and set env, follow cmd works normally.

Quoted 4 lines

bitbake -g -u depexp core-image-minimal

but once builded, the cmd works abnormal, the symptom like that:
What does "once builded" mean?

Thanks,
-- Dexuan

Quoted 6 lines

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

Quoted 4 lines

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

Quoted 4 lines

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
倪庆亮

TEL:    13588371863
E-MAIL: [email protected]
BLOG:   http://niqingliang2003.wordpress.com

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

I have not found the email adress of bitbake's developer, does anyone know?

I have changed that code section, and solved my problem, but I don't know if it is the right way.

            if isinstance(event, bb.event.CacheLoadCompleted):
                 pbar.hide()
                 continue
            .......
            if isinstance(event, bb.event.ParseCompleted):
                 pbar.hide()
                 continue

Quoted 4 lines · NiQingliang

I have looked the fiel depexp.py, and have some doubt:

why in "ParseCompleted", the progress bar will hide, but in "CacheLoadCompleted", it will not???????

Quoted 11 lines

I don't think these two events need different process.

if isinstance(event, bb.event.CacheLoadCompleted):
gtk.gdk.threads_enter() pbar.update(progress_total, progress_total) gtk.gdk.threads_leave()
continue
.......
if isinstance(event, bb.event.ParseCompleted):
pbar.hide() continue

Quoted 11 lines · NiQingliang

I have changed that code section, and solved my problem, but I don't know if it is the right way.

            if isinstance(event, bb.event.CacheLoadCompleted):
                 pbar.hide()
                 continue
            .......
            if isinstance(event, bb.event.ParseCompleted):
                 pbar.hide()
                 continue

Quoted 5 lines

Quoted 4 lines · NiQingliang

I have looked the fiel depexp.py, and have some doubt:

why in "ParseCompleted", the progress bar will hide, but in "CacheLoadCompleted", it will not???????

I guess there should be a ParseCompleted event after the CacheLoadCompleted event(?), but on your host, the ParseCompleted doesn't happen somehow?

I'm not sure your change is ok, because if it's a generic issue, why can't I reproduce the issue?

Quoted 11 lines

Quoted 11 lines

I don't think these two events need different process.

if isinstance(event, bb.event.CacheLoadCompleted):
gtk.gdk.threads_enter() pbar.update(progress_total, progress_total) gtk.gdk.threads_leave()
continue
.......
if isinstance(event, bb.event.ParseCompleted):
pbar.hide() continue

Thanks,
-- Dexuan

Quoted 11 lines · NiQingliang

I have changed that code section, and solved my problem, but I don't know if it is the right way.

            if isinstance(event, bb.event.CacheLoadCompleted):
                 pbar.hide()
                 continue
            .......
            if isinstance(event, bb.event.ParseCompleted):
                 pbar.hide()
                 continue

Quoted 5 lines · NiQingliang

Quoted 4 lines

I have looked the fiel depexp.py, and have some doubt:

why in "ParseCompleted", the progress bar will hide, but in "CacheLoadCompleted", it will not???????

I guess there should be a ParseCompleted event after the CacheLoadCompleted event(?), but on your host, the ParseCompleted doesn't happen somehow?

I'm not sure your change is ok, because if it's a generic issue, why can't I reproduce the issue?