Cannot compile helloworld-image
A message that is not in the archive (sent off-list or not yet received): 1309803629.20865.8.camel@BTW1
Quoted 6 lines · Alessandro Sappia
Hi all,
I just configured OE on my box and I tried to compile helloworld-image to check if everything is fine.
I'm actually unable to complete with success this build because of this error:
-----------------------------
Try with:
BB_NUMBER_THREADS = "1"
and have a look at the thread "[oe] gettext-native fails to build" of some days ago to know where i copied this hint from! (and maybe try oe-core branch too).
Ciao,
Enrico
Signature · 15 lines
-- Alessandro Sappia CEO ________________________________________________________________________ Biotechware srl C.so Castelfidardo, 30/A c/o I3P 10129 Torino (TO) Italy Tel: +39 011 0903260 Fax: +39 011 0905126 http://www.biotechware.com/ Il giorno lun, 04/07/2011 alle 22.05 +0200, Enrico ha scritto:
Quoted 9 lines
Quoted 6 lines · Alessandro Sappia
Hi all,
I just configured OE on my box and I tried to compile helloworld-image to check if everything is fine.
I'm actually unable to complete with success this build because of this error:
-----------------------------
Quoted 8 lines
Try with:
BB_NUMBER_THREADS= "1"and have a look at the thread "[oe] gettext-native fails to build" of some days ago to know where i copied this hint from! (and maybe try oe-core branch too).
[outout cut]
m4
-I /home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4 -I /home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal -I /home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gnulib-local/m4/ -I /home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-runtime/m4 -I /home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4 -I /home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11 -I /home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal --force -I ../../m4 -I ../m4 -I gnulib-m4
| autoreconf: running: libtoolize --copy --force | autoreconf: failed to run libtoolize: No such file or directory | autoreconf: libtoolize is needed because this package uses Libtool | + oefatal 'autoreconf execution failed.' | + echo FATAL: 'autoreconf execution failed.' | FATAL: autoreconf execution failed. | + exit 1
NOTE: package gettext-native-0.18-r6: task do_configure: Failed
ERROR: Task 435
(virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb, do_configure) failed with exit code '1' ERROR:
'virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb' failed
It didn't work, but thanks.
Ciao,
Alessandro
Hi Alessandro,
This may be a silly question, but do you have all of the required dependencies installed for your OS? Looks like libtool isn't being found.
http://wiki.openembedded.net/index.php/OEandYourDistro
Chris
Quoted 64 lines · Alessandro Sappia
--
Alessandro Sappia
CEO________________________________________________________________________
Biotechware srl
C.so Castelfidardo, 30/A c/o I3P 10129 Torino (TO) Italy
Tel: +39 011 0903260
Fax: +39 011 0905126
http://www.biotechware.com/Il giorno lun, 04/07/2011 alle 22.05 +0200, Enrico ha scritto:
Quoted 9 lines
Quoted 6 lines · Alessandro Sappia
Hi all,
I just configured OE on my box and I tried to compile helloworld-image to check if everything is fine.
I'm actually unable to complete with success this build because of this error:
-----------------------------Quoted 8 lines
Try with:
BB_NUMBER_THREADS= "1"and have a look at the thread "[oe] gettext-native fails to build" of some days ago to know where i copied this hint from! (and maybe try oe-core branch too).
[outout cut]
m4
-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gnulib-local/m4/-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-runtime/m4-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal--force -I ../../m4 -I ../m4 -I gnulib-m4| autoreconf: running: libtoolize --copy --force | autoreconf: failed to run libtoolize: No such file or directory | autoreconf: libtoolize is needed because this package uses Libtool | + oefatal 'autoreconf execution failed.' | + echo FATAL: 'autoreconf execution failed.' | FATAL: autoreconf execution failed. | + exit 1NOTE: package gettext-native-0.18-r6: task
do_configure: Failed
ERROR: Task 435
(virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb,do_configure) failed with exit code '1' ERROR:
'virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb' failedIt didn't work, but thanks.
Ciao,
Alessandro
_______________________________________________
Openembedded-devel mailing list [email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Il giorno mar, 05/07/2011 alle 00.37 -0700, Chris Verges ha scritto:
Quoted 8 lines
Hi Alessandro,
This may be a silly question, but do you have all of the required dependencies installed for your OS? Looks like libtool isn't being found.
Yes, I've already read that page.
From what I've seen list of required software is missing of (for ubuntu distro 64bit):
- chrpath (for newer bitbake)
Rechecking packages gave me that every package in that list is already installed.
After package list recheck and I didn't get libtool isn't installed on host (no package in wiki list has libtool as prerequisite).
so after checking required software in wiki I did a
$ sudo apt-get install libtool just in case.
but compilation fails on bison-native.
Seem solved by using the host bison ASSUME_PROVIDED += "bison-native" instead of let bitbake compile
(bison from recipes complains about a "perhaps missing m4 macro gl_GLIBC21").
Waiting for news.
If no news, then good news.
Thanks for now
Alessandro
Quoted 62 lines
Chris
Quoted 43 lines · Alessandro Sappia
--
Il giorno lun, 04/07/2011 alle 22.05 +0200, Enrico ha scritto:
Quoted 9 lines
Quoted 6 lines · Alessandro Sappia
Hi all,
I just configured OE on my box and I tried to compile helloworld-image to check if everything is fine.
I'm actually unable to complete with success this build because of this error:
-----------------------------Quoted 8 lines
Try with:
BB_NUMBER_THREADS= "1"and have a look at the thread "[oe] gettext-native fails to build" of some days ago to know where i copied this hint from! (and maybe try oe-core branch too).
[outout cut]
m4
-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gnulib-local/m4/-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-runtime/m4-I/home/alessandro/oe/build/tmp/work/x86_64-linux/gettext-native-0.18-r6/gettext-0.18/gettext-tools/m4-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal-1.11-I/home/alessandro/oe/build/tmp/sysroots/x86_64-linux/usr/share/aclocal--force -I ../../m4 -I ../m4 -I gnulib-m4| autoreconf: running: libtoolize --copy --force | autoreconf: failed to run libtoolize: No such file or directory | autoreconf: libtoolize is needed because this package uses Libtool | + oefatal 'autoreconf execution failed.' | + echo FATAL: 'autoreconf execution failed.' | FATAL: autoreconf execution failed. | + exit 1NOTE: package gettext-native-0.18-r6: task
do_configure: Failed
ERROR: Task 435
(virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb,do_configure) failed with exit code '1' ERROR:
'virtual:native:/home/alessandro/oe/openembedded/recipes/gettext/gettext_0.18.bb' failedIt didn't work, but thanks.
Quoted 10 lines
Ciao,
Alessandro
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Hi,
I have encountered the problem with the missing gl_GLIBC21 too.
This is what solved the problem for me:
bitbake -c clean gettext-native
bitbake gettext-native
Afterwards the string "GLIBC21" appears in sysroots/x86_64-linux/usr/share/aclocal/glibc21.m4 and sysroots/x86_64-linux/usr/share/aclocal/intl.m4
Best regards,
Jan
on 05.07.2011 12:10 Alessandro Sappia said the following:
Quoted 8 lines
but compilation fails on bison-native.
Seem solved by using the host bison
ASSUME_PROVIDED+= "bison-native" instead of let bitbake compile
(bison from recipes complains about a "perhaps missing m4 macrogl_GLIBC21").
Quoted 4 lines · Jan Kobler
Hi,
I have encountered the problem with the missing
gl_GLIBC21too.
Quoted 8 lines
This is what solved the problem for me:
bitbake -c clean gettext-native
bitbake gettext-nativeAfterwards the string "GLIBC21" appears in sysroots/x86_64-linux/usr/share/aclocal/glibc21.m4 and sysroots/x86_64-linux/usr/share/aclocal/intl.m4
The problem is something in master branch of bitbake. using .12 let a fresh enviroment build everything.
Quoted 13 lines
Best regards,
Jan
on 05.07.2011 12:10 Alessandro Sappia said the following:
Quoted 7 lines
but compilation fails on bison-native.
Seem solved by using the host bison
ASSUME_PROVIDED+= "bison-native" instead of let bitbake compile
(bison from recipes complains about a "perhaps missing m4 macrogl_GLIBC21").