Skip to contentSkip to conversation

Problem with task do_package_update_index_ipk

DISCUSSION Rob Smith 1 participant 2 messages Jul 22, 2011

lore
Share & tools
lore

Rob Smith

author
#0 lore raw

Hello,

I've encountered a strange problem that seems to have arisen from nowhere. Essentially, when I try to bitbake an image (omap3-console-image), the process gets completely stuck in the task do_package_update_index_ipk. Its currently been running for over 4 hours. Yesterday, it was working fine, and would take only a few minutes for that task to complete.

This morning, all I changed was some configure options for the packages gst-plugins-base and gst-plugins-good, cleaned them, and then rebuilt, using these commands:

# bitbake gst-plugins-base -c clean
# bitbake gst-plugins-base
# bitbake gst-plugins-good -c clean
# bitbake gst-plugins-good
# bitbake omap3-console-image

This last command gets stuck in the do_package_update_index_ipk task. What exactly does this task do, and is there anything I can do to fix this? Is there an index file that might be corrupt?

Thanks for any help,
Regards
Rob Smih

author
#1 lore raw

Hello Again,

I've managed to discover what the problem was... It turns out the ipk.lock file was still present in my deploy directory, which seems to have completely messed things up.

The location of the .lock file was tmp/deploy/glibc/, and when present the do_package_update_index_ipk task just hung forever. Perhaps this should be a bug report, as there should have at least been a warning message.

Anyway, just for info.

Cheers
Rob

Quoted 32 lines · Rob Smith

Hello,

I've encountered a strange problem that seems to have arisen from nowhere. Essentially, when I try to bitbake an image (omap3-console-image), the process gets completely stuck in the task do_package_update_index_ipk. Its currently been running for over 4 hours. Yesterday, it was working fine, and would take only a few minutes for that task to complete.

This morning, all I changed was some configure options for the packages gst-plugins-base and gst-plugins-good, cleaned them, and then rebuilt, using these commands:

# bitbake gst-plugins-base -c clean
# bitbake gst-plugins-base
# bitbake gst-plugins-good -c clean
# bitbake gst-plugins-good
# bitbake omap3-console-image

This last command gets stuck in the do_package_update_index_ipk task. What exactly does this task do, and is there anything I can do to fix this? Is there an index file that might be corrupt?

Thanks for any help,
Regards
Rob Smih

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel