ASoC: Parse board ID/revision information from WM1250-EV1 board
Subsystems (3)
PATCH 1/1 ASoC: Parse board ID/revision information from WM1250-EV1 board
The WM1250-EV1 board has an ID chip on it, check the board ID and display the board revision during startup.
Signed-off-by Mark Brown <[email protected]>
--- sound/soc/codecs/wm1250-ev1.c | 20 +++++++++++++++++++- 1 files changed, 19 insertions(+), 1 deletions(-)
sound/soc/codecs/wm1250-ev1.c +19 -1
@@ -56,8 +56,26 @@ static struct snd_soc_codec_driver soc_codec_dev_wm1250_ev1 = { };static int __devinit wm1250_ev1_probe (struct i2c_client *i2c, -const struct i2c_device_id *id) +const struct i2c_device_id *i2c_id) { +int ret, id, board, rev; + + board =i2c_smbus_read_byte_data (i2c,0 ); +if (board <0 ) { +dev_err (&i2c->dev,"Failed to read ID: %d\n" , ret); +return ret; + } + + id = (board &0xfe ) >>2 ; + rev = board &0x3 ; + +if (id !=1 ) { +dev_err (&i2c->dev,"Unknown board ID %d\n" , id); +return -ENODEV ; + } + +dev_info (&i2c->dev,"revision %d\n" , rev); +return snd_soc_register_codec (&i2c->dev, &soc_codec_dev_wm1250_ev1, &wm1250_ev1_dai,1 ); }
Signature · 1 line
1.7.5.4