Skip to contentSkip to conversation

regulator: tps65023: patch updates

PATCH Superseded Marcus Folkesson 2 participants 6 messages Aug 2, 2011 – Aug 4, 2011 Voltage and current regulator framework

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Marcus Folkesson

author
#0 lore raw

v2 cover regulator: tps65023: patch updates

This is version 2 of the tps65023 regulator patch set.

Changes from previous patches:
* Split up [PATCH 1/3] into two seperate patches ([PATCHv2 [1-2]/4])
* Declared tps_driver_data.info as const for avoiding awkward typecastings
* Removed table-length structs and uses tps->table_len instead. (As Axel Lin suggested in lkml)

author
#1 lore raw

PATCH v2 1/4 regulator: tps65023: Fixes i2c configuration issues

Allow i2c core voltage adjustments by clearing CORE ADJ Allowed bit in CTRL2

Signed-off-by Marcus Folkesson <[email protected]>
---
 drivers/regulator/tps65023-regulator.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
drivers/regulator/tps65023-regulator.c +11 -0
index 701a590..a81abd4 100644
@@ -63,6 +63,13 @@
 #define TPS65023_REG_CTRL_LDO2_EN	BIT(2)
 #define TPS65023_REG_CTRL_LDO1_EN	BIT(1)
 
+/* REG_CTRL2 bitfields */
+#define TPS65023_REG_CTRL2_GO		BIT(7)
+#define TPS65023_REG_CTRL2_CORE_ADJ	BIT(6)
+#define TPS65023_REG_CTRL2_DCDC2	BIT(2)
+#define TPS65023_REG_CTRL2_DCDC1	BIT(2)
+#define TPS65023_REG_CTRL2_DCDC3	BIT(0)
+
 /* LDO_CTRL bitfields */
 #define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
 #define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0xF0 >> ((ldo_id)*4))

@@ -475,6 +482,10 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, tps);
 
+	/* Enable setting output voltage by I2C */
+	tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+						TPS65023_REG_CTRL2_CORE_ADJ);
+
 	return 0;
 
  fail:
Signature · 1 line
1.7.4.1
author
#2 lore raw

PATCH v2 2/4 regulator: tps65023: Set missing bit for update core-voltage

In reply to Marcus Folkesson

Setting the GO bit in CTRL2 for updating the core voltage

Signed-off-by Marcus Folkesson <[email protected]>
---
 drivers/regulator/tps65023-regulator.c |   19 ++++++++++++++-----
 1 files changed, 14 insertions(+), 5 deletions(-)
drivers/regulator/tps65023-regulator.c +14 -5
index a81abd4..8bd41fa 100644
@@ -277,6 +277,7 @@ static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
 	struct tps_pmic *tps = rdev_get_drvdata(dev);
 	int dcdc = rdev_get_id(dev);
 	int vsel;
+	int ret;
 
 	if (dcdc != TPS65023_DCDC_1)
 		return -EINVAL;

@@ -299,11 +300,19 @@ static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
 
 	*selector = vsel;
 
-	/* write to the register in case we found a match */
-	if (vsel == tps->info[dcdc]->table_len)
-		return -EINVAL;
-	else
-		return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+	if (vsel == tps->info[dcdc]->table_len) {
+		ret = -EINVAL;
+	} else {
+		ret = tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+
+		/* Tell the chip that we have changed the value in DEFCORE
+		 * and its time to update the core voltage
+		 */
+		tps_65023_set_bits(tps, TPS65023_REG_CON_CTRL2,
+							TPS65023_REG_CTRL2_GO);
+	}
+
+	return ret;
 }
 
 static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
Signature · 1 line
1.7.4.1
author
#3 lore raw

PATCH v2 3/4 regulator: tps65023: Setting correct core regulator for tps65021

In reply to Marcus Folkesson

TPS65023 is using VDCDC1 as core regulator and TPS65021 is using VDCDC3. Core-regulator and voltage-tables may differ between different regulators. These two is now passed as driver data.

Signed-off-by Marcus Folkesson <[email protected]>
---
 drivers/regulator/tps65023-regulator.c |   96 +++++++++++++++++++++++++-------
 1 files changed, 75 insertions(+), 21 deletions(-)
drivers/regulator/tps65023-regulator.c +75 -21
index 8bd41fa..0161410 100644
@@ -92,7 +92,7 @@
 #define TPS65023_MAX_REG_ID		TPS65023_LDO_2
 
 /* Supported voltage values for regulators */
-static const u16 VDCDC1_VSEL_table[] = {
+static const u16 VCORE_VSEL_table[] = {
 	800, 825, 850, 875,
 	900, 925, 950, 975,
 	1000, 1025, 1050, 1075,

@@ -103,20 +103,20 @@ static const u16 VDCDC1_VSEL_table[] = {
 	1500, 1525, 1550, 1600,
 };
 
-static const u16 LDO1_VSEL_table[] = {
+
+
+/* Supported voltage values for LDO regulators
+ * for tps65021 and tps65023 */
+static const u16 TPS65023_LDO1_VSEL_table[] = {
 	1000, 1100, 1300, 1800,
 	2200, 2600, 2800, 3150,
 };
 
-static const u16 LDO2_VSEL_table[] = {
+static const u16 TPS65023_LDO2_VSEL_table[] = {
 	1050, 1200, 1300, 1800,
 	2500, 2800, 3000, 3300,
 };
 
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table),
-				0, 0, ARRAY_SIZE(LDO1_VSEL_table),
-				ARRAY_SIZE(LDO2_VSEL_table)};
-
 /* Regulator specific details */
 struct tps_info {
 	const char *name;

@@ -134,6 +134,13 @@ struct tps_pmic {
 	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
 	const struct tps_info *info[TPS65023_NUM_REGULATOR];
 	struct regmap *regmap;
+	u8 core_regulator;
+};
+
+/* Struct passed as driver data */
+struct tps_driver_data {
+	const struct tps_info *info;
+	u8 core_regulator;
 };
 
 static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)

@@ -260,7 +267,7 @@ static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc == TPS65023_DCDC_1) {
+	if (dcdc == tps->core_regulator) {
 		data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE);
 		if (data < 0)
 			return data;

@@ -279,9 +286,8 @@ static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
 	int vsel;
 	int ret;
 
-	if (dcdc != TPS65023_DCDC_1)
+	if (dcdc != tps->core_regulator)
 		return -EINVAL;
-
 	if (min_uV < tps->info[dcdc]->min_uV
 			|| min_uV > tps->info[dcdc]->max_uV)
 		return -EINVAL;

@@ -378,7 +384,7 @@ static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
 	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
 		return -EINVAL;
 
-	if (dcdc == TPS65023_DCDC_1) {
+	if (dcdc == tps->core_regulator) {
 		if (selector >= tps->info[dcdc]->table_len)
 			return -EINVAL;
 		else

@@ -430,7 +436,8 @@ static struct regmap_config tps65023_regmap_config = {
 static int __devinit tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
-	const struct tps_info *info = (void *)id->driver_data;
+	const struct tps_driver_data *drv_data = (void *)id->driver_data;
+	const struct tps_info *info = drv_data->info;
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
 	struct tps_pmic *tps;

@@ -462,6 +469,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 	/* common for all regulators */
 	tps->client = client;
+	tps->core_regulator = drv_data->core_regulator;
 
 	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
 		/* Store regulator specific information */

@@ -469,7 +477,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 
 		tps->desc[i].name = info->name;
 		tps->desc[i].id = i;
-		tps->desc[i].n_voltages = num_voltages[i];
+		tps->desc[i].n_voltages = info->table_len;
 		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
 					&tps65023_ldo_ops : &tps65023_dcdc_ops);
 		tps->desc[i].type = REGULATOR_VOLTAGE;

@@ -527,13 +535,49 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct tps_info tps65021_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV =  3300000,
+		.max_uV = 3300000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV =  1800000,
+		.max_uV = 1800000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV =  800000,
+		.max_uV = 1600000,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
+	},
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3150000,
+		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+		.table = TPS65023_LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 1050000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+		.table = TPS65023_LDO2_VSEL_table,
+	},
+};
+
 static const struct tps_info tps65023_regs[] = {
 	{
 		.name = "VDCDC1",
 		.min_uV =  800000,
 		.max_uV = 1600000,
-		.table_len = ARRAY_SIZE(VDCDC1_VSEL_table),
-		.table = VDCDC1_VSEL_table,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
 	},
 	{
 		.name = "VDCDC2",

@@ -551,23 +595,33 @@ static const struct tps_info tps65023_regs[] = {
 		.name = "LDO1",
 		.min_uV = 1000000,
 		.max_uV = 3150000,
-		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
-		.table = LDO1_VSEL_table,
+		.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+		.table = TPS65023_LDO1_VSEL_table,
 	},
 	{
 		.name = "LDO2",
 		.min_uV = 1050000,
 		.max_uV = 3300000,
-		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
-		.table = LDO2_VSEL_table,
+		.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+		.table = TPS65023_LDO2_VSEL_table,
 	},
 };
 
+static struct tps_driver_data tps65021_drv_data = {
+		.info = tps65021_regs,
+		.core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+		.info = tps65023_regs,
+		.core_regulator = TPS65023_DCDC_1,
+};
+
 static const struct i2c_device_id tps_65023_id[] = {
 	{.name = "tps65023",
-	.driver_data = (unsigned long) tps65023_regs,},
+	.driver_data = (unsigned long) &tps65023_drv_data},
 	{.name = "tps65021",
-	.driver_data = (unsigned long) tps65023_regs,},
+	.driver_data = (unsigned long) &tps65021_drv_data,},
 	{ },
 };
Signature · 1 line
1.7.4.1
author
#4 lore raw

PATCH v2 4/4 regulator: tps65023: Added support for the similiar TPS65020 chip

In reply to Marcus Folkesson

Defines a new voltage-table and allows registering of the tps65020 device.

Signed-off-by Marcus Folkesson <[email protected]>
---
 drivers/regulator/tps65023-regulator.c |   53 ++++++++++++++++++++++++++++++++
 1 files changed, 53 insertions(+), 0 deletions(-)
drivers/regulator/tps65023-regulator.c +53 -0
index 0161410..bf3f91c 100644
@@ -103,7 +103,16 @@ static const u16 VCORE_VSEL_table[] = {
 	1500, 1525, 1550, 1600,
 };
 
+/* Supported voltage values for LDO regulators for tps65020 */
+static const u16 TPS65020_LDO1_VSEL_table[] = {
+	1000, 1050, 1100, 1300,
+	1800, 2500, 3000, 3300,
+};
 
+static const u16 TPS65020_LDO2_VSEL_table[] = {
+	1000, 1050, 1100, 1300,
+	1800, 2500, 3000, 3300,
+};
 
 /* Supported voltage values for LDO regulators
  * for tps65021 and tps65023 */

@@ -535,6 +544,43 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct tps_info tps65020_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.fixed	= 1,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV =  1800000,
+		.max_uV = 1800000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV =  800000,
+		.max_uV = 1600000,
+		.table_len = ARRAY_SIZE(VCORE_VSEL_table),
+		.table = VCORE_VSEL_table,
+	},
+
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3150000,
+		.table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
+		.table = TPS65020_LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 1050000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
+		.table = TPS65020_LDO2_VSEL_table,
+	},
+};
+
 static const struct tps_info tps65021_regs[] = {
 	{
 		.name = "VDCDC1",

@@ -607,6 +653,11 @@ static const struct tps_info tps65023_regs[] = {
 	},
 };
 
+static struct tps_driver_data tps65020_drv_data = {
+		.info = tps65020_regs,
+		.core_regulator = TPS65023_DCDC_3,
+};
+
 static struct tps_driver_data tps65021_drv_data = {
 		.info = tps65021_regs,
 		.core_regulator = TPS65023_DCDC_3,

@@ -622,6 +673,8 @@ static const struct i2c_device_id tps_65023_id[] = {
 	.driver_data = (unsigned long) &tps65023_drv_data},
 	{.name = "tps65021",
 	.driver_data = (unsigned long) &tps65021_drv_data,},
+	{.name = "tps65020",
+	.driver_data = (unsigned long) &tps65020_drv_data},
 	{ },
 };
Signature · 1 line
1.7.4.1
#5 lore raw
In reply to Marcus Folkesson
Quoted 6 lines · Marcus Folkesson

This is version 2 of the tps65023 regulator patch set.

Changes from previous patches:
* Split up [PATCH 1/3] into two seperate patches ([PATCHv2 [1-2]/4])
* Declared tps_driver_data.info as const for avoiding awkward typecastings
* Removed table-length structs and uses tps->table_len instead. (As Axel Lin suggested in lkml)

As previously mentioned you need to send patches ot maintainers.