macb: handle clk_get error
PATCH 2/4 macb: handle clk_get error
--- drivers/net/macb.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
drivers/net/macb.c +6 -0
@@ -49,6 +49,7 @@#include <asm/io.h> #include <mach/board.h> #include <linux/clk.h> +#include <linux/err.h> #include "macb.h"
@@ -454,6 +455,11 @@ static int macb_probe(struct device_d *dev)*/ #if defined(CONFIG_ARCH_AT91 ) pclk =clk_get (dev,"macb_clk" ); +if (IS_ERR (pclk)) { +dev_err (dev,"no macb_clk\n" ); +return PTR_ERR (pclk); + } +clk_enable (pclk); macb_hz =clk_get_rate (pclk);#else
Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 3/4 atmel_mci: handle clk_get error correctly
--- drivers/mci/atmel_mci.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)
drivers/mci/atmel_mci.c +3 -2
@@ -23,6 +23,7 @@#include <asm/io.h> #include <mach/board.h> #include <linux/clk.h> +#include <linux/err.h> #include "at91_mci.h"
@@ -460,9 +461,9 @@ static int mci_probe(struct device_d *hw_dev) host->hw_dev = hw_dev; hw_dev->priv = host; host->clk =clk_get (hw_dev,"mci_clk" ); -if (host->clk ==NULL ) { +if (IS_ERR (host->clk)) {dev_err (hw_dev,"no mci_clk\n" ); -return -EINVAL ; +return PTR_ERR (host->clk); } clk_rate =clk_get_rate (host->clk);
Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 3/4] atmel_mci: handle clk_get error correctly
Quoted 1 line · Hubert Feurstein
Signed-off-by Hubert Feurstein <[email protected]>
Best Regards,
J.
Quoted 36 lines
--- drivers/mci/atmel_mci.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)drivers/mci/atmel_mci.c +3
-2@@ -23,6 +23,7 @@#include <asm/io.h> #include <mach/board.h> #include <linux/clk.h> +#include <linux/err.h> #include "at91_mci.h" @@ -460,9 +461,9 @@ static int mci_probe(struct device_d *hw_dev) host->hw_dev = hw_dev; hw_dev->priv = host; host->clk =clk_get (hw_dev,"mci_clk" ); -if (host->clk ==NULL ) { +if (IS_ERR (host->clk)) {dev_err (hw_dev,"no mci_clk\n" ); -return -EINVAL ; +return PTR_ERR (host->clk); } clk_rate =clk_get_rate (host->clk);Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 3/4] atmel_mci: handle clk_get error correctly
In reply to Hubert FeursteinQuoted 19 lines · Hubert Feurstein
Signed-off-by Hubert Feurstein <[email protected]>--- drivers/mci/atmel_mci.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)drivers/mci/atmel_mci.c +1
-0@@ -23,6 +23,7 @@#include <asm/io.h> #include <mach/board.h> #include <linux/clk.h> +#include <linux/err.h> #include "at91_mci.h" @@ -460,9 +461,9 @@ static int mci_probe(struct device_d *hw_dev) host->hw_dev = hw_dev;
drivers/mci/atmel_mci.c static int mci_probe(struct device_d *hw_dev) · line 469
Quoted 10 lines
drivers/mci/atmel_mci.c +2
-2hw_dev->priv = host; host->clk =clk_get (hw_dev,"mci_clk" ); -if (host->clk ==NULL ) { +if (IS_ERR (host->clk)) {dev_err (hw_dev,"no mci_clk\n" ); -return -EINVAL ; +return PTR_ERR (host->clk); } clk_rate =clk_get_rate (host->clk);
Applied 1-3 to next (could have gone to master, but the fixes are probably not that urgent)
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 4/4 at91sam9g45: add missing spi clock entries
In reply to Hubert Feurstein--- arch/arm/mach-at91/at91sam9g45.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/mach-at91/at91sam9g45.c +2 -0
@@ -191,6 +191,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {
Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 4/4] at91sam9g45: add missing spi clock entries
Quoted 1 line · Hubert Feurstein
Signed-off-by Hubert Feurstein <[email protected]>
If you want to add the spi please add it on all at91
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH 1/1 at91: add spi fake clock entries
--- arch/arm/mach-at91/at91sam9260.c | 7 +++++++ arch/arm/mach-at91/at91sam9261.c | 7 +++++++ arch/arm/mach-at91/at91sam9263.c | 2 ++ arch/arm/mach-at91/at91sam9g45.c | 2 ++ 4 files changed, 18 insertions(+), 0 deletions(-)
arch/arm/mach-at91/at91sam9260.c +7 -0
@@ -169,6 +169,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),
@@ -203,6 +208,8 @@ static void __init at91sam9260_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));
arch/arm/mach-at91/at91sam9261.c +7 -0
@@ -133,6 +133,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),
@@ -190,6 +195,8 @@ static void at91sam9261_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));
arch/arm/mach-at91/at91sam9263.c +2 -0
@@ -166,6 +166,8 @@ static struct clk *periph_clocks[] = {static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), };static struct clk_lookup usart_clocks_lookups[] = {
arch/arm/mach-at91/at91sam9g45.c +2 -0
@@ -191,6 +191,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {
Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH] at91: add spi fake clock entries
There are not fake clock they are connection ID
Best Regards,
J.
Quoted 86 lines · Hubert Feurstein
Signed-off-by Hubert Feurstein <[email protected]>--- arch/arm/mach-at91/at91sam9260.c | 7 +++++++ arch/arm/mach-at91/at91sam9261.c | 7 +++++++ arch/arm/mach-at91/at91sam9263.c | 2 ++ arch/arm/mach-at91/at91sam9g45.c | 2 ++ 4 files changed, 18 insertions(+), 0 deletions(-)arch/arm/mach-at91/at91sam9260.c +7
-0@@ -169,6 +169,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),@@ -203,6 +208,8 @@ static void __init at91sam9260_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));arch/arm/mach-at91/at91sam9261.c +7
-0@@ -133,6 +133,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),@@ -190,6 +195,8 @@ static void at91sam9261_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));arch/arm/mach-at91/at91sam9263.c +2
-0@@ -166,6 +166,8 @@ static struct clk *periph_clocks[] = {static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), };static struct clk_lookup usart_clocks_lookups[] = {arch/arm/mach-at91/at91sam9g45.c +2
-0@@ -191,6 +191,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {Signature · 1 line
1.7.4.1
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 1/1 at91: add spi clock connection id entries
---
Changed commit message.
arch/arm/mach-at91/at91sam9260.c | 7 +++++++ arch/arm/mach-at91/at91sam9261.c | 7 +++++++ arch/arm/mach-at91/at91sam9263.c | 2 ++ arch/arm/mach-at91/at91sam9g45.c | 2 ++ 4 files changed, 18 insertions(+), 0 deletions(-)
arch/arm/mach-at91/at91sam9260.c +7 -0
@@ -169,6 +169,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),
@@ -203,6 +208,8 @@ static void __init at91sam9260_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));
arch/arm/mach-at91/at91sam9261.c +7 -0
@@ -133,6 +133,11 @@ static struct clk *periph_clocks[] = {// irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +}; +static struct clk_lookup usart_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart0" , &mck),CLKDEV_CON_DEV_ID ("usart" ,"atmel_usart1" , &usart0_clk),
@@ -190,6 +195,8 @@ static void at91sam9261_register_clocks(void)for (i =0 ; i <ARRAY_SIZE (periph_clocks); i++)clk_register (periph_clocks[i]); +clkdev_add_table (periph_clocks_lookups, +ARRAY_SIZE (periph_clocks_lookups));clkdev_add_table (usart_clocks_lookups,ARRAY_SIZE (usart_clocks_lookups));
arch/arm/mach-at91/at91sam9263.c +2 -0
@@ -166,6 +166,8 @@ static struct clk *periph_clocks[] = {static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"at91_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), };static struct clk_lookup usart_clocks_lookups[] = {
arch/arm/mach-at91/at91sam9g45.c +2 -0
@@ -191,6 +191,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci0" , &mmc0_clk),CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci1" , &mmc1_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {
Signature · 7 lines
1.7.4.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox