ASoC:blackfin:add ad73311 card driver name
PATCH v2 1/1 ASoC:blackfin:add ad73311 card driver name
Add driver_name in snd_soc_card, asoc will copy this name to driver field of snd_card. ALSA lib need this info to load the proper card config.
--- sound/soc/blackfin/bf5xx-ad73311.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
sound/soc/blackfin/bf5xx-ad73311.c +1 -0
@@ -192,6 +192,7 @@ static struct snd_soc_dai_link bf5xx_ad73311_dai[] = {static struct snd_soc_card bf5xx_ad73311 = { .name ="bfin-ad73311" , + .driver_name ="AD73311" , .probe = bf5xx_probe, .dai_link = &bf5xx_ad73311_dai[CONFIG_SND_BF5XX_SPORT_NUM ], .num_links =1 ,
Signature · 1 line
1.7.0.4
sound/soc/blackfin/bf5xx-ad73311.c static struct snd_soc_dai_link bf5xx_ad73311_dai[] = { · line 195
Quoted 6 lines · Scott Jiang
Add
driver_nameinsnd_soc_card, asoc will copy this name to driver field ofsnd_card. ALSA lib need this info to load the proper card config.static struct
snd_soc_cardbf5xx_ad73311= {sound/soc/blackfin/bf5xx-ad73311.c +1
-0.name = "bfin-ad73311", + .driver_name = "AD73311",
All my comments about the previous revision of the patch continue to apply here. The changlog doesn't explain the issue well (the driver should already end up with a unique name) and the name you've picked is less distinctive than the existing name.
2011/9/13 Mark Brown <[email protected]>:
Quoted 5 lines · Scott Jiang
Quoted 3 lines
Add
driver_nameinsnd_soc_card, asoc will copy this name to driver field ofsnd_card. ALSA lib need this info to load the proper card config.
Quoted 8 lines
Quoted 3 lines
static struct
snd_soc_cardbf5xx_ad73311= {
.name = "bfin-ad73311",
+ .driver_name = "AD73311",All my comments about the previous revision of the patch continue to apply here. The changlog doesn't explain the issue well (the driver should already end up with a unique name)
in alsa lib snd_config_hook_load_for_all_cards(), use sndrv_ctl_card_info->driver to determine card config,
not sndrv_ctl_card_info->name, though card name contains enough info.
Quoted 3 lines
and the name you've picked
is less distinctive than the existing name.
I know the name is not good enough, but it is a historical result. Asoc copy codec name to card->driver before, cause all cards config file in alsa lib conf dir have this kind of name.
Quoted 10 lines · Scott Jiang
2011/9/13 Mark Brown <[email protected]>:
Quoted 5 lines · Scott Jiang
All my comments about the previous revision of the patch continue to apply here. The changlog doesn't explain the issue well (the driver should already end up with a unique name)
in alsa lib
snd_config_hook_load_for_all_cards(), usesndrv_ctl_card_info->driverto determine card config,
notsndrv_ctl_card_info->name, though card name contains enough info.
So the issue isn't that the driver doesn't have a name, it's that you don't like the name it was given. The changelog needs to explain this, and also explain why this is an issue in this one driver.
Quoted 6 lines
Quoted 2 lines
and the name you've picked
is less distinctive than the existing name.I know the name is not good enough, but it is a historical result. Asoc copy codec name to
card->driverbefore, cause all cards config file in alsa lib conf dir have this kind of name.
This sounds like you should fix userspace. It does go back to the issue I regularly raise with the Blackfin code constantly assuming that there can be a single driver which covers all combinations of a Blackfin CPU with a given CODEC.
2011/9/15 Mark Brown <[email protected]>:
Quoted 8 lines · Scott Jiang
Quoted 6 lines
2011/9/13 Mark Brown <[email protected]>:
Quoted 5 lines · Scott Jiang
All my comments about the previous revision of the patch continue to apply here. The changlog doesn't explain the issue well (the driver should already end up with a unique name)
Quoted 6 lines
Quoted 3 lines
in alsa lib
snd_config_hook_load_for_all_cards(), usesndrv_ctl_card_info->driverto determine card config,
notsndrv_ctl_card_info->name, though card name contains enough info.So the issue isn't that the driver doesn't have a name, it's that you don't like the name it was given.
Do you mean alsa lib needs to modify its way to determine which card config to load?
I don't think alsa lib guys will agree.
Quoted 3 lines
The changelog needs to explain this,
and also explain why this is an issue in this one driver.
Not only for this one driver, it's a problem for all drivers under asoc. Because sndrv_ctl_card_info->driver is an empty string now.
Quoted 12 lines
Quoted 6 lines
Quoted 2 lines
and the name you've picked
is less distinctive than the existing name.I know the name is not good enough, but it is a historical result. Asoc copy codec name to
card->driverbefore, cause all cards config file in alsa lib conf dir have this kind of name.This sounds like you should fix userspace. It does go back to the issue I regularly raise with the Blackfin code constantly assuming that there can be a single driver which covers all combinations of a Blackfin CPU with a given CODEC.
As I have said it was caused by ASoC before. It is not a guilt of blackfin. All drivers under ASoC must name their card config the same as their codec driver's name because asoc copy codec name to snd_card->driver and alsa lib get it through sndrv_ctl_card_info->driver. They must match.
Now ASoC doesn't copy codec name to snd_card->driver so we can rename it to bfin-ad73311 if you like this kind of name style.
Quoted 7 lines · Scott Jiang
2011/9/15 Mark Brown <[email protected]>:
Quoted 5 lines · Scott Jiang
Quoted 4 lines
in alsa lib
snd_config_hook_load_for_all_cards(), usesndrv_ctl_card_info->driverto determine card config,
notsndrv_ctl_card_info->name, though card name contains enough info.
Quoted 6 lines
Quoted 2 lines
So the issue isn't that the driver doesn't have a name, it's that you don't like the name it was given.
Do you mean alsa lib needs to modify its way to determine which card config to load?
I don't think alsa lib guys will agree.
Well, that's one option.
Quoted 5 lines
Quoted 2 lines
The changelog needs to explain this,
and also explain why this is an issue in this one driver.Not only for this one driver, it's a problem for all drivers under asoc. Because
sndrv_ctl_card_info->driveris an empty string now.
So if that's the case then it seems very clear that a driver specific change isn't a good way of addressing the issue. If the driver name is null it actually seems like modifying userspace should be very easy, we simply need to fall back to reading the card name if the driver name is empty.
Quoted 10 lines
Quoted 4 lines
This sounds like you should fix userspace. It does go back to the issue I regularly raise with the Blackfin code constantly assuming that there can be a single driver which covers all combinations of a Blackfin CPU with a given CODEC.
As I have said it was caused by ASoC before. It is not a guilt of blackfin. All drivers under ASoC must name their card config the same as their codec driver's name because asoc copy codec name to
snd_card->driverand alsa lib get it throughsndrv_ctl_card_info->driver. They must match.
Right, but if the Blackfin community had been alert to the idea that not all machines using a given CODEC are the same it should have been obvious that this was a poor identifier to use for this and something was wrong.
Quoted 2 lines
Now ASoC doesn't copy codec name to
snd_card->driverso we can rename it to bfin-ad73311 if you like this kind of name style.
No, doing something that requires updates to every single machine driver isn't good (unless you're going to go through and update every one of them I guess, but even then it's not great).
Quoted 13 lines · Scott Jiang
Add
driver_nameinsnd_soc_card, asoc will copy this name to driver field ofsnd_card. ALSA lib need this info to load the proper card config.Signed-off-by Scott Jiang <[email protected]>--- sound/soc/blackfin/bf5xx-ad73311.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)sound/soc/blackfin/bf5xx-ad73311.c +0
-0
sound/soc/blackfin/bf5xx-ad73311.c static struct snd_soc_dai_link bf5xx_ad73311_dai[] = { · line 198
Quoted 7 lines
sound/soc/blackfin/bf5xx-ad73311.c +1
-0@@ -192,6 +192,7 @@ static struct snd_soc_dai_link bf5xx_ad73311_dai[] = {static struct snd_soc_card bf5xx_ad73311 = { .name ="bfin-ad73311" , + .driver_name ="AD73311" , .probe = bf5xx_probe, .dai_link = &bf5xx_ad73311_dai[CONFIG_SND_BF5XX_SPORT_NUM ], .num_links =1 ,