Feedback on HOB (new image creator GUI)
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Best Regards
Ke
Ps. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Where conf/hob-pre.conf conf/hob-post.conf is the configuration file, which can be empty in above case.
Quoted 4 lines · Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not really an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.
I'll be fleshing this page out over the coming weeks.
Quoted 7 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 6 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Regards,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 4 lines · Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.
I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 7 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 6 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Regards,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 4 lines · Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.
I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 6 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 6 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Regards,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreOp 30 sep. 2011 om 10:49 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 29 lines · Ke
Quoted 4 lines
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 6 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 6 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 5 lines
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Can we have it use local.conf by default please? I hate having to put the same info in multiple places
Quoted 13 lines
Regards,
JoshuaSignature · 9 lines
Joshua Lock Yocto Project "Johannes factotum" Intel Open Source Technology Centre _______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Quoted 32 lines · Koen Kooi
Op 30 sep. 2011 om 10:49 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 29 lines · Ke
Quoted 4 lines
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 12 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 7 lines
Quoted 5 lines
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Can we have it use local.conf by default please? I hate having to put the same info in multiple places
We do use local.conf in that if values are set there and not in either of the hob configuration files the values from local.conf are used however I had an explicit feature request to not modify local.conf.
I actually started looking at having Hob use an independent configuration file so that Hob settings would persist across build directories, this didn't make it in the 1.1 time frame unfortunately.
Cheers,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreOp 30 sep. 2011 om 12:16 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 36 lines · Koen Kooi
Quoted 35 lines
Op 30 sep. 2011 om 10:49 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 32 lines · Ke
Quoted 4 lines
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 4 lines
It is a graphical image creator that
allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 6 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 6 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.confIn oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
The script will create the required configuration files with some required values.
Can we have it use local.conf by default please? I hate having to put the same info in multiple places
We do use local.conf in that if values are set there and not in either of the hob configuration files the values from local.conf are used however I had an explicit feature request to not modify local.conf.
In the past it would ignore DISTRO, leading to much headscratching
Quoted 11 lines
I actually started looking at having Hob use an independent configuration file so that Hob settings would persist across build directories, this didn't make it in the 1.1 time frame unfortunately.
Cheers,
JoshuaSignature · 3 lines
Joshua Lock Yocto Project "Johannes factotum" Intel Open Source Technology Centre
Quoted 42 lines
-----Original Message-----
From: Koen Kooi [mailto:[email protected]]
Sent: Saturday, October 01, 2011 12:33 AM
To: Patches and discussions about the oe-core layer
Cc: Yu, Ke; [email protected]; openembedded-core
Subject: Re: [OE-core] Feedback on HOB (new image creator GUI)Op 30 sep. 2011 om 10:49 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 8 lines · Ke
Quoted 4 lines
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 13 lines
Quoted 4 lines
It is a graphical image creator that allows user to freely choose which packages to be built in the image.
The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 5 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable
input.
Quoted 8 lines
Quoted 7 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 8 lines
Quoted 5 lines
In oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Can we have it use local.conf by default please? I hate having to put the same info in multiple places
Yes, this is valid. We should be able to use local.conf as pre and post conf file, if they are not specified by user. Thanks for the input. I will add it to my plan.
Regards
Ke
Quoted 48 lines · Ke
Quoted 48 lines
-----Original Message-----
From: Koen Kooi [mailto:[email protected]]
Sent: Saturday, October 01, 2011 12:33 AM
To: Patches and discussions about the oe-core layer
Cc: Yu, Ke; [email protected]; openembedded-core
Subject: Re: [OE-core] Feedback on HOB (new image creator GUI)Op 30 sep. 2011 om 10:49 heeft Joshua Lock <[email protected]> het volgende geschreven:
Quoted 8 lines · Ke
Quoted 4 lines
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder).
It's not an acronym, it's just a name - Hob.
Quoted 13 lines
Quoted 4 lines
It is a graphical image creator that allows user to freely choose which packages to be built in the image.
The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.I'll be changing this page and adding more user-centric info in the coming weeks.
Quoted 5 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable
input.
Quoted 13 lines
Quoted 7 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.confIn oe-core (and therefore Poky) we have a wrapper script so from an oe-init-build-env'd build directory you can just call hob.
The script will create the required configuration files with some required values.
Quoted 6 lines
Quoted 2 lines
Can we have it use local.conf by default please? I hate having to put the same info in multiple places
Yes, this is valid. We should be able to use local.conf as pre and post conf file, if they are not specified by user. Thanks for the input. I will add it to my plan.
I'm not sure we should promise that - the plan, per bug #1441 (and as alluded to earlier) is to have the configuration be independent of BitBake and persistent to the UI (i.e. hob configuration is the same even if I launch it from a clean build dir).
This isn't a mandate but we should certainly weigh up the pro's and con's of either side before we propose which one to implement.
http://bugzilla.pokylinux.org/show_bug.cgi?id=1441
Cheers,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 16 lines · Yu Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows user to freely choose which packages to be built in the image. The wiki
https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Best Regards
Ke
Quoted 6 lines
Ps. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.confWhere
conf/hob-pre.confconf/hob-post.confis the configuration file, which can be empty in above case.
Has any discussion gone into making some sort of plugin or extensions? I'd like for it to be as easy as possible for someone new to make hob be able to some things like: configure runtime services, configure networking settings, add users, and I'm sure there are other things.
-M
Quoted 21 lines · On Fri, 2011-09-30 at 10:20 -0600, McClintock Matthew-B29882 wrote:
Quoted 20 lines · Yu Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows user to freely choose which packages to be built in the image. The wiki
https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 7 lines
Quoted 2 lines
Where
conf/hob-pre.confconf/hob-post.confis the configuration file, which can be empty in above case.Has any discussion gone into making some sort of plugin or extensions? I'd like for it to be as easy as possible for someone new to make hob be able to some things like: configure runtime services, configure networking settings, add users, and I'm sure there are other things.
No such discussion has occurred. These are good feature suggestions, though I'm not sure about a plugin mechanism - are you suggesting that to enable the features mentioned or in addition to?
At least for enabling runtime services there's likely an issue of the GUI having enough knowledge of the init system to do so.
I can certainly see at least the three features proposed here being desirable and I'll probably file those as feature enhancements in the bugzilla, unless you'd like to?
Any further thoughts on customisations to enable via the GUI?
Cheers,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 5 lines · Joshua Lock
No such discussion has occurred. These are good feature suggestions, though I'm not sure about a plugin mechanism - are you suggesting that to enable the features mentioned or in addition to?
At least for enabling runtime services there's likely an issue of the GUI having enough knowledge of the init system to do so.
I'd just like to be able to make these extensions/add-ons while not being familiar with bitbake internals. Maybe by INHERIT'ing bbclasses? It just seems like adding some configuration pane for configuring ip addresses should be as easy and possible.
Quoted 5 lines
I can certainly see at least the three features proposed here being desirable and I'll probably file those as feature enhancements in the bugzilla, unless you'd like to?
Any further thoughts on customisations to enable via the GUI?
I can file some enhancement bugs. We are actually brainstorming this as I type this so I'm sure some more things will come up ;)
-M
Quoted 21 lines · On Fri, 2011-09-30 at 10:20 -0600, McClintock Matthew-B29882 wrote:
Quoted 20 lines · Yu Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows user to freely choose which packages to be built in the image. The wiki
https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 7 lines
Quoted 2 lines
Where
conf/hob-pre.confconf/hob-post.confis the configuration file, which can be empty in above case.Has any discussion gone into making some sort of plugin or extensions? I'd like for it to be as easy as possible for someone new to make hob be able to some things like: configure runtime services, configure networking settings, add users, and I'm sure there are other things.
No such discussion has occurred. These are good feature suggestions, I'm not sure about a plugin mechanism - are you suggesting that to enable the features mentioned or in addition to?
At least for enabling runtime services there's likely an issue of the UI having enough knowledge of the init system to do so.
I can certainly see at least the three features proposed here being desirable and I'll probably file those as feature enhancements in the bugzilla, unless you'd like to?
Any further thoughts on customisations to enable via the GUI?
Cheers,
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology CentreQuoted 8 lines · Yu Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows user to freely choose which packages to be built in the image. The wiki https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 8 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.confWhere
conf/hob-pre.confconf/hob-post.confis the configuration file, which can be empty in above case.
I build images which are not based on any of the core-XXX images listed by HOB. How can I get them into the drop-down base list?
Is there a way I can filter out some of the base images? tasks?
I ask these questions because in particular, I use a lot of the recipes in meta and meta-yocto, but none of the images or tasks (because they don't really address my needs, don't take offense, I just want more control than they offer)
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 28 lines
-----Original Message-----
From: Gary Thomas [mailto:[email protected]]
Sent: Saturday, October 01, 2011 5:56 AM
To: Patches and discussions about the oe-core layer
Cc: Yu, Ke; [email protected]; Lock, Joshua
Subject: Re: [OE-core] Feedback on HOB (new image creator GUI)Quoted 4 lines · Yu Ke
Hi,
As you may already know, a new GUI has been added to bitbake recently, i.e. HOB (Human Oriented Builder). It is a graphical image creator that allows
user to freely choose which packages to be built in the image. The wiki
https://wiki.yoctoproject.org/wiki/BitBake/GUI/Hob has more detail.Quoted 3 lines
This email is to collect your feedback on the HOB. Current HOB is our first version, and it surely has many place to improve. We has the plan to
enhance it in Yocto 1.2. So we really hope that you can use it and provide your valuable feedback . We do think user's feedback/requirement is the right way to go. Looking forward your valuable input.
Quoted 8 lines
Best Regards
KePs. The simple way to run hob is:
# touch conf/hob-pre.conf conf/hob-post.conf # bitbake -u hob -r conf/hob-pre.conf -R conf/hob-post.conf
Quoted 6 lines
Quoted 1 line
Where
conf/hob-pre.confconf/hob-post.confis the configuration file, whichcan be empty in above case.
I build images which are not based on any of the core-XXX images listed by HOB. How can I get them into the drop-down base list?
Is there a way I can filter out some of the base images? tasks?
Gary, thanks for trying and giving out the input. It is helpful.
For the base image list, HOB generate it by searching all the task whose name containing "image", and we plan to improve it in Yocto 1.2 by searching task who inherits image.bbclass.
So currently, if you name your own image with XXX-image, HOB should be able to automatically add it in the drop-down list.
And yes, it is helpful to allow user adding item into base image list. it can be done by adding one item in "Edit"->"Preference". I will add this requirement to my plan. For base image filtering, I am not sure if it is necessary, since base image list is not that long. How do you think?
Regards
Ke
Quoted 10 lines
I ask these questions because in particular, I use a lot of the recipes in meta and meta-yocto, but none of the images or tasks (because they don't really address my needs, don't take offense, I just want more control than they offer)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
On Fri, Sep 30, 2011 at 21:23, Yu, Ke <[email protected]> wrote:
...
Quoted 3 lines
So currently, if you name your own image with XXX-image, HOB should be able to automatically add it in the drop-down list.
And yes, it is helpful to allow user adding item into base image list. it can be done by adding one item in "Edit"->"Preference". I will add this requirement to my plan. For base image filtering, I am not sure if it is necessary, since base image list is not that long. How do you think?
...
It would be nice to have a way to filter out images too. In case we're customizing oe-core to a customer we might want to reduce the options to avoid unsupported images to be built.
Signature · 3 lines
Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
Op 1 okt. 2011 om 12:46 heeft Otavio Salvador <[email protected]> het volgende geschreven:
Quoted 10 lines · Ke
...
Quoted 3 lines
So currently, if you name your own image with XXX-image, HOB should be able to automatically add it in the drop-down list.
And yes, it is helpful to allow user adding item into base image list. it can be done by adding one item in "Edit"->"Preference". I will add this requirement to my plan. For base image filtering, I am not sure if it is necessary, since base image list is not that long. How do you think?
...
It would be nice to have a way to filter out images too. In case we're customizing oe-core to a customer we might want to reduce the options to avoid unsupported images to be built.
Like a whitelist regexp on hob.conf
Quoted 10 lines
Signature · 9 lines
-- Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br _______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Quoted 7 lines · Koen Kooi
Op 1 okt. 2011 om 12:46 heeft Otavio Salvador <[email protected]> het volgende geschreven:
Quoted 4 lines · Ke
...
Quoted 2 lines
So currently, if you name your own image with XXX-image, HOB should be able to automatically add it in the drop-down list.
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
And yes, it is helpful to allow user adding item into base image list. it can be done by adding one item in "Edit"->"Preference". I will add this requirement to my plan. For base image filtering, I am not sure if it is necessary, since base image list is not that long. How do you think?
...
It would be nice to have a way to filter out images too. In case we're customizing oe-core to a customer we might want to reduce the options to avoid unsupported images to be built.
Like a whitelist regexp on hob.conf
Filed as Yocto #1581
http://bugzilla.pokylinux.org/show_bug.cgi?id=1581
Joshua
Signature · 3 lines
Joshua Lock
Yocto Project "Johannes factotum"
Intel Open Source Technology Centre