ASoC: da7210: convert to soc-cache
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Axel,
Today I was about to submit a patch series for da7210 codec driver
and noticed your patch for the same driver. My patch series is mainly feature update kind of nature. It has total nine patches that add support for various things, starting from basic IOs to DAPM.
I am thinking of going forward with my posting which is based on current version of da7210 mainline driver. In am ready to take the responsibility of updating(to base it on my patch series) and testing your patch on the hardware that we have.
Other option is to wait till your changes gets approved and then base my patch series on updated driver with your changes. But as this may take some time and I definitely want to get more eyes on the patches early, this would be least preferred.
Thanks,
-- Ashish (GNU FAN)
Quoted 273 lines
Date: Wed, 12 Oct 2011 07:16:25 +0800
From: Axel Lin <[email protected]>
Subject: [alsa-devel] [PATCH] ASoC: da7210: convert to soc-cache
To: [email protected]
Cc: David Chen <[email protected]>, [email protected],
Mark Brown <[email protected]>, Liam Girdwood
<[email protected]>, Kuninori Morimoto <[email protected]>
Message-ID: <1318374985.6115.10.camel@phoenix>
Content-Type: text/plain; charset="UTF-8"Signed-off-by Axel Lin <[email protected]>---
Hi Kuninori,
This patch converts da7210 to use soc-cache APIs.
I don't have this hardware, I'd appreciate if you can test this patch.Thanks,
Axelsound/soc/codecs/da7210.c | 123 ++++++++++++++++---------------------------- 1 files changed, 45 insertions(+), 78 deletions(-)sound/soc/codecs/da7210.c +45
-78@@ -162,7 +162,6 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {/* Codec private data */ struct da7210_priv {enum snd_soc_control_type control_type; -void *control_data; };/* @@ -189,50 +188,16 @@ static const u8 da7210_reg[] = { 0x00, /* R88 */ }; -/* -* Read da7210 register cache -*/ -static inline u32 da7210_read_reg_cache (struct snd_soc_codec *codec,u32 reg) -{ -u8 *cache = codec->reg_cache; -BUG_ON (reg >=ARRAY_SIZE (da7210_reg)); -return cache[reg]; -} - -/* -* Write to the da7210 register space -*/ -static int da7210_write (struct snd_soc_codec *codec,u32 reg,u32 value) -{ -u8 *cache = codec->reg_cache; -u8 data[2 ]; - -BUG_ON (codec->driver->volatile_register); - - data[0 ] = reg &0xff ; - data[1 ] = value &0xff ; - -if (reg >= codec->driver->reg_cache_size) -return -EIO ; - -if (2 != codec->hw_write (codec->control_data, data,2 )) -return -EIO ; - - cache[reg] = value; -return 0 ; -} - -/* -* Read from the da7210 register space. -*/ -static inline u32 da7210_read (struct snd_soc_codec *codec,u32 reg) +static int da7210_volatile_register (struct snd_soc_codec *codec, +unsigned int reg) { -if (DA7210_STATUS == reg) -return i2c_smbus_read_byte_data (codec->control_data, reg); - -return da7210_read_reg_cache (codec, reg); +switch (reg) { +case DA7210_STATUS : +return 1 ; +default : +return 0 ; + } } -static int da7210_startup (struct snd_pcm_substream *substream,struct snd_soc_dai *dai) {@@ -271,13 +236,13 @@ static int da7210_hw_params(struct snd_pcm_substream *substream,u32 fs, bypass;/* set DAI source to Left and Right ADC */ -da7210_write (codec,DA7210_DAI_SRC_SEL , +snd_soc_write (codec,DA7210_DAI_SRC_SEL ,DA7210_DAI_OUT_R_SRC |DA7210_DAI_OUT_L_SRC );/* Enable DAI */ -da7210_write (codec,DA7210_DAI_CFG3 ,DA7210_DAI_OE |DA7210_DAI_EN ); +snd_soc_write (codec,DA7210_DAI_CFG3 ,DA7210_DAI_OE |DA7210_DAI_EN ); - dai_cfg1 =0xFC &da7210_read (codec,DA7210_DAI_CFG1 ); + dai_cfg1 =0xFC &snd_soc_read (codec,DA7210_DAI_CFG1 );switch (params_format (params)) {case SNDRV_PCM_FORMAT_S16_LE :@@ -290,7 +255,7 @@ static int da7210_hw_params(struct snd_pcm_substream *substream,return -EINVAL ; } -da7210_write (codec,DA7210_DAI_CFG1 , dai_cfg1); +snd_soc_write (codec,DA7210_DAI_CFG1 , dai_cfg1); hpf_reg = (SNDRV_PCM_STREAM_PLAYBACK == substream->stream) ?DA7210_DAC_HPF :DA7210_ADC_HPF ;@@ -383,8 +348,8 @@ static int da7210_set_dai_fmt(struct snd_soc_dai *codec_dai, u32 fmt)u32 dai_cfg1;u32 dai_cfg3; - dai_cfg1 =0x7f &da7210_read (codec,DA7210_DAI_CFG1 ); - dai_cfg3 =0xfc &da7210_read (codec,DA7210_DAI_CFG3 ); + dai_cfg1 =0x7f &snd_soc_read (codec,DA7210_DAI_CFG1 ); + dai_cfg3 =0xfc &snd_soc_read (codec,DA7210_DAI_CFG3 );switch (fmt &SND_SOC_DAIFMT_MASTER_MASK ) {case SND_SOC_DAIFMT_CBM_CFM :@@ -412,8 +377,8 @@ static int da7210_set_dai_fmt(struct snd_soc_dai *codec_dai, u32 fmt)*/ dai_cfg1 |=DA7210_DAI_FLEN_64BIT ; -da7210_write (codec,DA7210_DAI_CFG1 , dai_cfg1); -da7210_write (codec,DA7210_DAI_CFG3 , dai_cfg3); +snd_soc_write (codec,DA7210_DAI_CFG1 , dai_cfg1); +snd_soc_write (codec,DA7210_DAI_CFG3 , dai_cfg3);return 0 ; }@@ -452,11 +417,15 @@ static struct snd_soc_dai_driver da7210_dai = {static int da7210_probe (struct snd_soc_codec *codec) {struct da7210_priv *da7210 =snd_soc_codec_get_drvdata (codec); +int ret;dev_info (codec->dev,"DA7210 Audio Codec %s\n" ,DA7210_VERSION ); - codec->control_data = da7210->control_data; - codec->hw_write = (hw_write_t )i2c_master_send; + ret =snd_soc_codec_set_cache_io (codec,8 ,8 , da7210->control_type); +if (ret <0 ) { +dev_err (codec->dev,"Failed to set cache I/O: %d\n" , ret); +return ret; + }/* FIXME * @@ -473,8 +442,8 @@ static int da7210_probe(struct snd_soc_codec *codec)/* * make sure that DA7210 use bypass mode before start up */ -da7210_write (codec,DA7210_STARTUP1 ,0 ); -da7210_write (codec,DA7210_PLL_DIV3 , +snd_soc_write (codec,DA7210_STARTUP1 ,0 ); +snd_soc_write (codec,DA7210_PLL_DIV3 ,DA7210_MCLK_RANGE_10_20_MHZ |DA7210_PLL_BYP );/* @@ -482,36 +451,36 @@ static int da7210_probe(struct snd_soc_codec *codec)*/ /* Enable Left & Right MIC PGA and Mic Bias */ -da7210_write (codec,DA7210_MIC_L ,DA7210_MIC_L_EN |DA7210_MICBIAS_EN ); -da7210_write (codec,DA7210_MIC_R ,DA7210_MIC_R_EN ); +snd_soc_write (codec,DA7210_MIC_L ,DA7210_MIC_L_EN |DA7210_MICBIAS_EN ); +snd_soc_write (codec,DA7210_MIC_R ,DA7210_MIC_R_EN );/* Enable Left and Right input PGA */ -da7210_write (codec,DA7210_INMIX_L ,DA7210_IN_L_EN ); -da7210_write (codec,DA7210_INMIX_R ,DA7210_IN_R_EN ); +snd_soc_write (codec,DA7210_INMIX_L ,DA7210_IN_L_EN ); +snd_soc_write (codec,DA7210_INMIX_R ,DA7210_IN_R_EN );/* Enable Left and Right ADC */ -da7210_write (codec,DA7210_ADC ,DA7210_ADC_L_EN |DA7210_ADC_R_EN ); +snd_soc_write (codec,DA7210_ADC ,DA7210_ADC_L_EN |DA7210_ADC_R_EN );/* * DAC settings */ /* Enable Left and Right DAC */ -da7210_write (codec,DA7210_DAC_SEL , +snd_soc_write (codec,DA7210_DAC_SEL ,DA7210_DAC_L_SRC_DAI_L |DA7210_DAC_L_EN |DA7210_DAC_R_SRC_DAI_R |DA7210_DAC_R_EN );/* Enable Left and Right out PGA */ -da7210_write (codec,DA7210_OUTMIX_L ,DA7210_OUT_L_EN ); -da7210_write (codec,DA7210_OUTMIX_R ,DA7210_OUT_R_EN ); +snd_soc_write (codec,DA7210_OUTMIX_L ,DA7210_OUT_L_EN ); +snd_soc_write (codec,DA7210_OUTMIX_R ,DA7210_OUT_R_EN );/* Enable Left and Right HeadPhone PGA */ -da7210_write (codec,DA7210_HP_CFG , +snd_soc_write (codec,DA7210_HP_CFG ,DA7210_HP_2CAP_MODE |DA7210_HP_SENSE_EN |DA7210_HP_L_EN |DA7210_HP_MODE |DA7210_HP_R_EN );/* Diable PLL and bypass it */ -da7210_write (codec,DA7210_PLL ,DA7210_PLL_FS_48000 ); +snd_soc_write (codec,DA7210_PLL ,DA7210_PLL_FS_48000 );/* * If 48kHz sound came, it use bypass mode, @@ -522,22 +491,22 @@ static int da7210_probe(struct snd_soc_codec *codec)* DA7210_PLL_DIV3 :: DA7210_PLL_BYP bit. * see da7210_hw_params */ -da7210_write (codec,DA7210_PLL_DIV1 ,0xE5 );/* MCLK = 12.288MHz */ -da7210_write (codec,DA7210_PLL_DIV2 ,0x99 ); -da7210_write (codec,DA7210_PLL_DIV3 ,0x0A | +snd_soc_write (codec,DA7210_PLL_DIV1 ,0xE5 );/* MCLK = 12.288MHz */ +snd_soc_write (codec,DA7210_PLL_DIV2 ,0x99 ); +snd_soc_write (codec,DA7210_PLL_DIV3 ,0x0A |DA7210_MCLK_RANGE_10_20_MHZ |DA7210_PLL_BYP );snd_soc_update_bits (codec,DA7210_PLL ,DA7210_PLL_EN ,DA7210_PLL_EN );/* As suggested by Dialog */ -da7210_write (codec,DA7210_A_HID_UNLOCK ,0x8B );/* unlock */ -da7210_write (codec,DA7210_A_TEST_UNLOCK ,0xB4 ); -da7210_write (codec,DA7210_A_PLL1 ,0x01 ); -da7210_write (codec,DA7210_A_CP_MODE ,0x7C ); -da7210_write (codec,DA7210_A_HID_UNLOCK ,0x00 );/* re-lock */ -da7210_write (codec,DA7210_A_TEST_UNLOCK ,0x00 ); +snd_soc_write (codec,DA7210_A_HID_UNLOCK ,0x8B );/* unlock */ +snd_soc_write (codec,DA7210_A_TEST_UNLOCK ,0xB4 ); +snd_soc_write (codec,DA7210_A_PLL1 ,0x01 ); +snd_soc_write (codec,DA7210_A_CP_MODE ,0x7C ); +snd_soc_write (codec,DA7210_A_HID_UNLOCK ,0x00 );/* re-lock */ +snd_soc_write (codec,DA7210_A_TEST_UNLOCK ,0x00 );/* Activate all enabled subsystem */ -da7210_write (codec,DA7210_STARTUP1 ,DA7210_SC_MST_EN ); +snd_soc_write (codec,DA7210_STARTUP1 ,DA7210_SC_MST_EN );snd_soc_add_controls (codec, da7210_snd_controls,ARRAY_SIZE (da7210_snd_controls));@@ -549,11 +518,10 @@ static int da7210_probe(struct snd_soc_codec *codec)static struct snd_soc_codec_driver soc_codec_dev_da7210 = { .probe = da7210_probe, - .read = da7210_read, - .write = da7210_write, .reg_cache_size =ARRAY_SIZE (da7210_reg), .reg_word_size =sizeof (u8), .reg_cache_default = da7210_reg, + .volatile_register = da7210_volatile_register, };#if defined(CONFIG_I2C ) || defined(CONFIG_I2C_MODULE )@@ -568,7 +536,6 @@ static int __devinit da7210_i2c_probe(struct i2c_client *i2c,return -ENOMEM ;i2c_set_clientdata (i2c, da7210); - da7210->control_data = i2c; da7210->control_type =SND_SOC_I2C ; ret = snd_soc_register_codec(&i2c->dev,Signature · 1 line
1.7.4.1
Quoted 1 line · Ashish Chavan
Hi Axel,
Don't top post and fix your mail client to thread mails properly; I didn't actually see your mail until just now due to the lack of threading.
Quoted 9 lines
I am thinking of going forward with my posting which is based on current version of da7210 mainline driver. In am ready to take the responsibility of updating(to base it on my patch series) and testing your patch on the hardware that we have.
Other option is to wait till your changes gets approved and then base my patch series on updated driver with your changes. But as this may take some time and I definitely want to get more eyes on the patches early, this would be least preferred.
There's no reason you couldn't do both.
I have to be honest here and say that even if I'd seen your mail before I applied Axel's patch there's no way I'd have held off on it due to your unpublished work. Axel's patch is here now, is a clear win and he's got a strong track record of doing this sort of valuable cleanup work. In contrast you guys have been working for something like a year to get the driver for one of your PMICs integrated and haven't yet sent any patches for audio at all. Without a track record of contributions it's hard to have confidence that the changes you're proposing will arrive when you say, or to have any idea about the level of difficulty in integrating them.
Quoted 7 lines · Mark Brown
Quoted 1 line · Ashish Chavan
Hi Axel,
Don't top post and fix your mail client to thread mails properly; I didn't actually see your mail until just now due to the lack of threading.
Ooops! I didn't actually realize that.
Quoted 11 lines
Quoted 9 lines
I am thinking of going forward with my posting which is based on current version of da7210 mainline driver. In am ready to take the responsibility of updating(to base it on my patch series) and testing your patch on the hardware that we have.
Other option is to wait till your changes gets approved and then base my patch series on updated driver with your changes. But as this may take some time and I definitely want to get more eyes on the patches early, this would be least preferred.
There's no reason you couldn't do both.
Do you mean I can continue posting the patches to get them reviewed and update them as per Axel's patch after review part is over?
Quoted 12 lines
I have to be honest here and say that even if I'd seen your mail before I applied Axel's patch there's no way I'd have held off on it due to your unpublished work. Axel's patch is here now, is a clear win and he's got a strong track record of doing this sort of valuable cleanup work. In contrast you guys have been working for something like a year to get the driver for one of your PMICs integrated and haven't yet sent any patches for audio at all. Without a track record of contributions it's hard to have confidence that the changes you're proposing will arrive when you say, or to have any idea about the level of difficulty in integrating them.
I agree with you here. what you are saying is correct as per your experience. But for da7210 codec, I already have the patch series ready with some confidence.
Quoted 2 lines · Ashish Chavan
Do you mean I can continue posting the patches to get them reviewed and update them as per Axel's patch after review part is over?
Well, if there's conflicts with Axel's patches obviously that'll be a
review issue. But in general talking about doing patches isn't really
useful.
Quoted 9 lines · Mark Brown
Quoted 2 lines · Ashish Chavan
Do you mean I can continue posting the patches to get them reviewed and update them as per Axel's patch after review part is over?
Well, if there's conflicts with Axel's patches obviously that'll be a
review issue. But in general talking about doing patches isn't really
useful.
I think as you have already merged Axel's changes, it makes sense to update my patch series based on his patch. I will do that and post the series in a day or two. I will also test Axle's patch on our hardware setup.
Hi Axel
Quoted 10 lines
Quoted 10 lines
Date: Wed, 12 Oct 2011 07:16:25 +0800
From: Axel Lin <[email protected]>
Subject: [alsa-devel] [PATCH] ASoC: da7210: convert to soc-cache
To: [email protected]
Cc: David Chen <[email protected]>, [email protected],
Mark Brown <[email protected]>, Liam Girdwood
<[email protected]>, Kuninori Morimoto <[email protected]>
Message-ID: <1318374985.6115.10.camel@phoenix>
Content-Type: text/plain; charset="UTF-8"
Quoted 5 lines
Quoted 5 lines
Signed-off-by Axel Lin <[email protected]>---
Hi Kuninori,
This patch converts da7210 to use soc-cache APIs.
I don't have this hardware, I'd appreciate if you can test this patch.
# I don't know why but I didn't get this original patch from ML.
I used Mark's for-3.2 branch (which already has this patch), and I tested it. It works well.
I tested aplay/arecored
Thank you
Best regards
---
Kuninori Morimoto