Skip to contentSkip to conversation

drivers: i915: Default backlight PWM frequency

PATCH Superseded Simon Que 1 participant 1 message Nov 11, 2011

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Simon Que

author
#0 lore raw

PATCH v3 1/1 drivers: i915: Default backlight PWM frequency

If the firmware did not initialize the backlight PWM registers, set up a default PWM frequency of 200 Hz. This is determined using the following formula:

freq = refclk / (128 * pwm_max)

The PWM register allows the max PWM value to be set. So we want to use the formula, where freq = 200:

pwm_max = refclk / (128 * freq)

This patch will, in the case of missing PWM register initialization values, look for the reference clock frequency. Based on that, it sets an appropriate max PWM value for a frequency of 200 Hz.

If no refclk frequency is found, the max PWM will be zero, which results in no change to the PWM registers.

To: [email protected]
To: Jesse Barnes <[email protected]>
To: Chris Wilson <[email protected]>
To: Eric Anholt <[email protected]>
To: Matthew Garrett <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Bryan Freed <[email protected]>
Cc: Sameer Nanda <[email protected]>

---
 drivers/gpu/drm/i915/intel_panel.c |   36 ++++++++++++++++++++++++++++++------
 1 files changed, 30 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_panel.c +30 -6
index f15388c..98439b3 100644
@@ -32,6 +32,10 @@
 
 #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
 
+/* For computing default PWM settings */
+#define DEFAULT_BACKLIGHT_PWM_FREQ   200
+#define BACKLIGHT_REFCLK_DIVISOR     128
+
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -129,12 +133,32 @@ static int is_backlight_combination_mode(struct drm_device *dev)
 	return 0;
 }
 
+static void i915_set_default_max_backlight(struct drm_i915_private *dev_priv)
+{
+	u32 refclk_freq_mhz = 0;
+	u32 max_pwm;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		refclk_freq_mhz = I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
+	else if (dev_priv->lvds_use_ssc)
+		refclk_freq_mhz = dev_priv->lvds_ssc_freq;
+
+	max_pwm = refclk_freq_mhz * 1000000 /
+			(BACKLIGHT_REFCLK_DIVISOR * DEFAULT_BACKLIGHT_PWM_FREQ);
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		dev_priv->saveBLC_PWM_CTL2 = max_pwm << 16;
+	else if (IS_PINEVIEW(dev_priv->dev))
+		dev_priv->saveBLC_PWM_CTL = max_pwm << 17;
+	else
+		dev_priv->saveBLC_PWM_CTL = max_pwm << 16;
+}
+
 static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 {
 	u32 val;
 
-	/* Restore the CTL value if it lost, e.g. GPU reset */
-
+	/* Restore the CTL value if it was lost, e.g. GPU reset */
 	if (HAS_PCH_SPLIT(dev_priv->dev)) {
 		val = I915_READ(BLC_PWM_PCH_CTL2);
 		if (dev_priv->saveBLC_PWM_CTL2 == 0) {
@@ -168,11 +192,11 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 
 	max = i915_read_blc_pwm_ctl(dev_priv);
 	if (max == 0) {
-		/* XXX add code here to query mode clock or hardware clock
-		 * and program max PWM appropriately.
+		/* If backlight PWM registers have not been set, set them to
+		 * default backlight PWM settings.
 		 */
-		printk_once(KERN_WARNING "fixme: max PWM is zero.\n");
-		return 1;
+		i915_set_default_max_backlight(dev_priv);
+		max = i915_read_blc_pwm_ctl(dev_priv);
 	}
 
 	if (HAS_PCH_SPLIT(dev)) {
Signature · 1 line
1.7.2.3