Skip to contentSkip to conversation

powernow-k8: Core Performance Boost and effective frequency support

PATCH In review Borislav Petkov 3 participants 12 messages Mar 24, 2010 – Mar 25, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover powernow-k8: Core Performance Boost and effective frequency support

From: Borislav Petkov <[email protected]>

Hi all,

here's the reworked version after incorporating most of your comments.

In particular, this version adds a /proc/cpuinfo flag and removes the scaling_cur_freq interface overload in favor of cpufreq-aperf userspace tool.

Please review,
thanks.

Changelog:

v0: initial submission

Signature · 2 lines
Regards/Gruss,
Boris.
#1 lore raw

PATCH 1/5 x86, cpu: Add AMD core boosting feature flag to /proc/cpuinfo

From: Borislav Petkov <[email protected]>

By semi-popular demand, this adds the Core Performance Boost feature flag to /proc/cpuinfo. Possible use case for this is userspace tools like cpufreq-aperf, for example, so that they don't have to jump through hoops of accessing "/dev/cpu/%d/cpuid" in order to check for CPB hw support.

---
 arch/x86/include/asm/cpufeature.h          |    1 +
 arch/x86/kernel/cpu/addon_cpuid_features.c |    5 +++--
 2 files changed, 4 insertions(+), 2 deletions(-)
arch/x86/include/asm/cpufeature.h +1 -0
index 0cd82d0..630e623 100644
@@ -161,6 +161,7 @@
  */
 #define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
 #define X86_FEATURE_ARAT	(7*32+ 1) /* Always Running APIC Timer */
+#define X86_FEATURE_CPB		(7*32+ 2) /* AMD Core Performance Boost */
 
 /* Virtualization flags: Linux defined */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
arch/x86/kernel/cpu/addon_cpuid_features.c +3 -2
index 97ad79c..ead2a1c 100644
@@ -30,8 +30,9 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
-		{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 },
+		{ X86_FEATURE_IDA,   CR_EAX, 1, 0x00000006 },
+		{ X86_FEATURE_ARAT,  CR_EAX, 2, 0x00000006 },
+		{ X86_FEATURE_CPB,   CR_EDX, 9, 0x80000007 },
 		{ X86_FEATURE_NPT,   CR_EDX, 0, 0x8000000a },
 		{ X86_FEATURE_LBRV,  CR_EDX, 1, 0x8000000a },
 		{ X86_FEATURE_SVML,  CR_EDX, 2, 0x8000000a },
Signature · 1 line
1.7.0
#2 lore raw

PATCH 2/5 powernow-k8: Add core performance boost support

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

Starting with F10h, revE, AMD processors add support for a dynamic core boosting feature called Core Performance Boost. When a specific condition is present, a subset of the cores on a system are boosted beyond their P0 operating frequency to speed up the performance of single-threaded applications.

In the normal case, the system comes out of reset with core boosting enabled. This patch adds a sysfs knob with which core boosting can be switched on or off for benchmarking purposes.

While at it, cleanup the driver init codepath and update copyrights.

---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c |  110 ++++++++++++++++++++++++++---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.h |    2 -
 2 files changed, 100 insertions(+), 12 deletions(-)
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +100 -10
index d360b56..b86daa6 100644
@@ -1,6 +1,5 @@
-
 /*
- *   (c) 2003-2006 Advanced Micro Devices, Inc.
+ *   (c) 2003-2010 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -54,6 +53,10 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
 
 static int cpu_family = CPU_OPTERON;
 
+/* core performance boost */
+static bool cpb_capable, cpb_enabled;
+static struct msr __percpu *msrs;
+
 #ifndef CONFIG_SMP
 static inline const struct cpumask *cpu_core_mask(int cpu)
 {
@@ -1393,8 +1396,73 @@ out:
 	return khz;
 }
 
+static void _cpb_toggle_msrs(bool t)
+{
+	int cpu;
+
+	rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+	for_each_cpu(cpu, cpu_online_mask) {
+		struct msr *reg = per_cpu_ptr(msrs, cpu);
+		if (t)
+			reg->l &= ~BIT(25);
+		else
+			reg->l |= BIT(25);
+	}
+	wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+}
+
+/*
+ * Switch on/off core performance boosting.
+ *
+ * 0=disable
+ * 1=enable.
+ */
+static void cpb_toggle(bool t)
+{
+	if (!cpb_capable)
+		return;
+
+	if (t && !cpb_enabled) {
+		cpb_enabled = true;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting enabled.\n");
+	} else if (!t && cpb_enabled) {
+		cpb_enabled = false;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting disabled.\n");
+	}
+}
+
+static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf,
+				 size_t count)
+{
+	int ret = -EINVAL;
+	unsigned long val = 0;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (!ret && (val == 0 || val == 1) && cpb_capable)
+		cpb_toggle(val);
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%u\n", cpb_enabled);
+}
+
+#define define_one_rw(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_one_rw(cpb);
+
 static struct freq_attr *powernow_k8_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
+	&cpb,
 	NULL,
 };
 
@@ -1413,7 +1481,7 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
 /* driver entry point for init */
 static int __cpuinit powernowk8_init(void)
 {
-	unsigned int i, supported_cpus = 0;
+	unsigned int i, supported_cpus = 0, cpu;
 
 	for_each_online_cpu(i) {
 		int rc;
@@ -1422,15 +1490,34 @@ static int __cpuinit powernowk8_init(void)
 			supported_cpus++;
 	}
 
-	if (supported_cpus == num_online_cpus()) {
-		printk(KERN_INFO PFX "Found %d %s "
-			"processors (%d cpu cores) (" VERSION ")\n",
-			num_online_nodes(),
-			boot_cpu_data.x86_model_id, supported_cpus);
-		return cpufreq_register_driver(&cpufreq_amd64_driver);
+	if (supported_cpus != num_online_cpus())
+		return -ENODEV;
+
+	printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
+		num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
+
+	if (boot_cpu_has(X86_FEATURE_CPB)) {
+
+		cpb_capable = true;
+
+		msrs = msrs_alloc();
+		if (!msrs) {
+			printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
+			return -ENOMEM;
+		}
+
+		rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+		for_each_cpu(cpu, cpu_online_mask) {
+			struct msr *reg = per_cpu_ptr(msrs, cpu);
+			cpb_enabled |= !(!!(reg->l & BIT(25)));
+		}
+
+		printk(KERN_INFO PFX "Core Performance Boosting: %s.\n",
+			(cpb_enabled ? "on" : "off"));
 	}
 
-	return -ENODEV;
+	return cpufreq_register_driver(&cpufreq_amd64_driver);
 }
 
 /* driver entry point for term */
@@ -1438,6 +1525,9 @@ static void __exit powernowk8_exit(void)
 {
 	dprintk("exit\n");
 
+	msrs_free(msrs);
+	msrs = NULL;
+
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
arch/x86/kernel/cpu/cpufreq/powernow-k8.h +0 -2
index 02ce824..df3529b 100644
@@ -5,7 +5,6 @@
  *  http://www.gnu.org/licenses/gpl.html
  */
 
-
 enum pstate {
 	HW_PSTATE_INVALID = 0xff,
 	HW_PSTATE_0 = 0,
@@ -55,7 +54,6 @@ struct powernow_k8_data {
 	struct cpumask *available_cores;
 };
 
-
 /* processor's cpuid instruction support */
 #define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
 #define CPUID_XFAM			0x0ff00000	/* extended family */
Signature · 1 line
1.7.0
#3 lore raw

PATCH 3/5 cpufreq: Add APERF/MPERF support for AMD processors

In reply to Borislav Petkov

From: Mark Langsdorf <[email protected]>

Starting with model 10 of Family 0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.

---
 arch/x86/kernel/cpu/amd.c                  |    6 +++
 arch/x86/kernel/cpu/cpufreq/Makefile       |    4 +-
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |   44 +-----------------------
 arch/x86/kernel/cpu/cpufreq/mperf.c        |   50 ++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/cpufreq/mperf.h        |    9 +++++
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c  |    8 ++++
 6 files changed, 77 insertions(+), 44 deletions(-)
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.h
arch/x86/kernel/cpu/amd.c +6 -0
index e485825..796f662 100644
@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
 	}
 
+	if (c->cpuid_level >= 6) {
+		unsigned ecx = cpuid_ecx(6);
+		if (ecx & 0x01)
+			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
+	}
+
 #ifdef CONFIG_X86_64
 	if (c->x86 == 0x10) {
 		/* do this for boot cpu */
arch/x86/kernel/cpu/cpufreq/Makefile +2 -2
index 1840c0a..bd54bf6 100644
@@ -2,8 +2,8 @@
 # K8 systems. ACPI is preferred to all other hardware-specific drivers.
 # speedstep-* is preferred over p4-clockmod.
 
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
 obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
 obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2 -42

68 lines not on this page · raw message

arch/x86/kernel/cpu/cpufreq/mperf.c new file +50 -0

50 lines not on this page · raw message

arch/x86/kernel/cpu/cpufreq/mperf.h new file +9 -0
new file mode 100644
index 0000000..5dbf295
@@ -0,0 +1,9 @@
+/*
+ *  (c) 2010 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
+					unsigned int cpu);
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +8 -0
index b86daa6..1dd292c 100644
@@ -45,6 +45,7 @@
 #define PFX "powernow-k8: "
 #define VERSION "version 2.20.00"
 #include "powernow-k8.h"
+#include "mperf.h"
 
 /* serialize freq changes  */
 static DEFINE_MUTEX(fidvid_mutex);
@@ -57,6 +58,8 @@ static int cpu_family = CPU_OPTERON;
 static bool cpb_capable, cpb_enabled;
 static struct msr __percpu *msrs;
 
+static struct cpufreq_driver cpufreq_amd64_driver;
+
 #ifndef CONFIG_SMP
 static inline const struct cpumask *cpu_core_mask(int cpu)
 {
@@ -1251,6 +1254,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
+	struct cpuinfo_x86 *c = &cpu_data(pol->cpu);
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1325,6 +1329,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		return -EINVAL;
 	}
 
+	/* Check for APERF/MPERF support in hardware */
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf;
+
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
Signature · 1 line
1.7.0
#4 lore raw

Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors

Quoted 26 lines · On Wednesday 24 March 2010 18:46:21 Borislav Petkov wrote:

From: Mark Langsdorf <[email protected]>

Starting with model 10 of Family 0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.

---
 arch/x86/kernel/cpu/amd.c                  |    6 +++
 arch/x86/kernel/cpu/cpufreq/Makefile       |    4 +-
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |   44 +-----------------------
 arch/x86/kernel/cpu/cpufreq/mperf.c        |   50 ++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/cpufreq/mperf.h        |    9 +++++
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c  |    8 ++++
 6 files changed, 77 insertions(+), 44 deletions(-)
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.h
arch/x86/kernel/cpu/amd.c +0 -0
index e485825..796f662 100644

arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 545

Quoted 9 lines
arch/x86/kernel/cpu/amd.c +6 -0
@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
 	}
 
+	if (c->cpuid_level >= 6) {
+		unsigned ecx = cpuid_ecx(6);
+		if (ecx & 0x01)
+			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
+	}
+

Can you put this into:
arch/x86/kernel/cpu/common.c (or wherever it fits in general x86 cpu init code) and remove this (arch/x86/kernel/cpu/intel.c):

        if (c->cpuid_level > 6) {
                unsigned ecx = cpuid_ecx(6);
                if (ecx & 0x01)
                        set_cpu_cap(c, X86_FEATURE_APERFMPERF);
        }

an x86 maintainer might want to double check, but I expect this should work for all x86 machines?

Thomas

#5 lore raw

Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors

From: Thomas Renninger <[email protected]>
Date: Thu, Mar 25, 2010 at 10:43:04AM +0100

Hi Thomas,

Quoted 39 lines · On Wednesday 24 March 2010 18:46:21 Borislav Petkov wrote:
Quoted 26 lines

From: Mark Langsdorf <[email protected]>

Starting with model 10 of Family 0x10, AMD processors may have support for APERF/MPERF. Add support for identifying it and using it within cpufreq. Move the APERF/MPERF functions out of the acpi-cpufreq code and into their own file so they can easily be shared.

---
 arch/x86/kernel/cpu/amd.c                  |    6 +++
 arch/x86/kernel/cpu/cpufreq/Makefile       |    4 +-
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |   44 +-----------------------
 arch/x86/kernel/cpu/cpufreq/mperf.c        |   50 ++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/cpufreq/mperf.h        |    9 +++++
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c  |    8 ++++
 6 files changed, 77 insertions(+), 44 deletions(-)
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.c
 create mode 100644 arch/x86/kernel/cpu/cpufreq/mperf.h
arch/x86/kernel/cpu/amd.c +0 -0
index e485825..796f662 100644

arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 545

Quoted 9 lines
arch/x86/kernel/cpu/amd.c +6 -0
@@ -537,6 +537,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
 	}
 
+	if (c->cpuid_level >= 6) {
+		unsigned ecx = cpuid_ecx(6);
+		if (ecx & 0x01)
+			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
+	}
+

Can you put this into:
arch/x86/kernel/cpu/common.c (or wherever it fits in general x86 cpu init code) and remove this (arch/x86/kernel/cpu/intel.c):

Quoted 8 lines
        if (c->cpuid_level > 6) {
                unsigned ecx = cpuid_ecx(6);
                if (ecx & 0x01)
                        set_cpu_cap(c, X86_FEATURE_APERFMPERF);
        }

an x86 maintainer might want to double check, but I expect this should work for all x86 machines?

Yes, it should. However, there's the remote, far-fetched possibility that other x86 vendors besides AMD and Intel, might have/plan to have CPUID, base function 6, ECX[1] defined as a completely different feature flag. And then it becomes ugly.

Besides, this is, strictly speaking, not x86 generic code but AMD- and Intel-generic (huh, is there something like that? :)) code.

So, IMO, this is a judgement call based on the current settings of the duplication and bloating levels of the x86 maintainers' filters :)

Let's have some more opinions, please...

Thanks.

Signature · 6 lines
Regards/Gruss,
Boris.

--
Advanced Micro Devices, Inc.
Operating Systems Research Center
#6 lore raw

Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors

In reply to Thomas Renninger
Quoted 4 lines · Thomas Renninger

arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 540

Quoted 1 line
arch/x86/kernel/cpu/amd.c +1 -0
+	if (c->cpuid_level >= 6) {

and remove this (arch/x86/kernel/cpu/intel.c):

        if (c->cpuid_level > 6) {

So is > or >= the correct comparator here?

#7 lore raw

Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors

Quoted 7 lines · On Thursday 25 March 2010 08:55:19 pm [email protected] wrote:
Quoted 4 lines · Thomas Renninger

arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 540

Quoted 1 line
arch/x86/kernel/cpu/amd.c +1 -0
+	if (c->cpuid_level >= 6) {

and remove this (arch/x86/kernel/cpu/intel.c):

        if (c->cpuid_level > 6) {

So is > or >= the correct comparator here?

This one: >= is correct (for both).
I double checked, there is one Intel CPU type
having a cpuid_level of 6, but this would not support aperf/mperf, thus above is still fine.

The remaining question is what Borislav said:
are there other x86 CPU vendors who could use this differently. I very much expect there are not.

IMO you should resubmit this one or the whole series with this change and Dave should just push this in his tree and queue it up, there was enough time to object.

Thanks,

Thomas

#8 lore raw

Re: [PATCH 3/5] cpufreq: Add APERF/MPERF support for AMD processors

From: Thomas Renninger <[email protected]>
Date: Thu, Mar 25, 2010 at 09:59:31PM +0100

Quoted 7 lines · On Thursday 25 March 2010 08:55:19 pm [email protected] wrote:
Quoted 6 lines · Thomas Renninger
Quoted 4 lines

arch/x86/kernel/cpu/amd.c static void __cpuinit init_amd(struct cpuinfo_x86 *c) · line 540

Quoted 1 line
arch/x86/kernel/cpu/amd.c +1 -0
+	if (c->cpuid_level >= 6) {

and remove this (arch/x86/kernel/cpu/intel.c):

        if (c->cpuid_level > 6) {
Quoted 6 lines
Quoted 1 line

So is > or >= the correct comparator here?

This one: >= is correct (for both).
I double checked, there is one Intel CPU type
having a cpuid_level of 6, but this would not support aperf/mperf, thus above is still fine.

Agreed. ">" won't work on machines which have base cpuidlevel == 6 (like AMD, f.e.)

Quoted 5 lines

The remaining question is what Borislav said:
are there other x86 CPU vendors who could use this differently. I very much expect there are not.

IMO you should resubmit this one or the whole series with this change

Ok, will do tomorrow.

Quoted 2 lines

and Dave should just push this in his tree and queue it up, there was enough time to object.

The problem here is that the patches touch both cpufreq and x86 code. Hmmm...

Signature · 6 lines
Regards/Gruss,
Boris.

--
Advanced Micro Devices, Inc.
Operating Systems Research Center
#9 lore raw

PATCH 4/5 powernow-k8: Fix frequency reporting

In reply to Borislav Petkov

From: Mark Langsdorf <[email protected]>

With F10, model 10, all valid frequencies are in the ACPI _PST table.

---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
arch/x86/kernel/cpu/cpufreq/powernow-k8.c +2 -1
index 1dd292c..317db7b 100644
@@ -935,7 +935,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 		powernow_table[i].index = index;
 
 		/* Frequency may be rounded for these */
-		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+		if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+				 || boot_cpu_data.x86 == 0x11) {
 			powernow_table[i].frequency =
 				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
 		} else
Signature · 1 line
1.7.0
#10 lore raw

PATCH 5/5 cpufreq: Unify sysfs attribute definition macros

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

Multiple modules used to define those which are with identical functionality and were needlessly replicated among the different cpufreq drivers. Push them into the header and remove duplication.

---
 drivers/cpufreq/cpufreq.c              |   40 +++++++++-----------------
 drivers/cpufreq/cpufreq_conservative.c |   48 ++++++++++---------------------
 drivers/cpufreq/cpufreq_ondemand.c     |   40 ++++++++------------------
 include/linux/cpufreq.h                |   30 ++++++++++++++++++++
 4 files changed, 72 insertions(+), 86 deletions(-)
drivers/cpufreq/cpufreq.c +14 -26
index 2d5d575..e02e417 100644
@@ -662,32 +662,20 @@ static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
 	return sprintf(buf, "%u\n", policy->cpuinfo.max_freq);
 }
 
-#define define_one_ro(_name) \
-static struct freq_attr _name = \
-__ATTR(_name, 0444, show_##_name, NULL)
-
-#define define_one_ro0400(_name) \
-static struct freq_attr _name = \
-__ATTR(_name, 0400, show_##_name, NULL)
-
-#define define_one_rw(_name) \
-static struct freq_attr _name = \
-__ATTR(_name, 0644, show_##_name, store_##_name)
-
-define_one_ro0400(cpuinfo_cur_freq);
-define_one_ro(cpuinfo_min_freq);
-define_one_ro(cpuinfo_max_freq);
-define_one_ro(cpuinfo_transition_latency);
-define_one_ro(scaling_available_governors);
-define_one_ro(scaling_driver);
-define_one_ro(scaling_cur_freq);
-define_one_ro(bios_limit);
-define_one_ro(related_cpus);
-define_one_ro(affected_cpus);
-define_one_rw(scaling_min_freq);
-define_one_rw(scaling_max_freq);
-define_one_rw(scaling_governor);
-define_one_rw(scaling_setspeed);
+cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400);
+cpufreq_freq_attr_ro(cpuinfo_min_freq);
+cpufreq_freq_attr_ro(cpuinfo_max_freq);
+cpufreq_freq_attr_ro(cpuinfo_transition_latency);
+cpufreq_freq_attr_ro(scaling_available_governors);
+cpufreq_freq_attr_ro(scaling_driver);
+cpufreq_freq_attr_ro(scaling_cur_freq);
+cpufreq_freq_attr_ro(bios_limit);
+cpufreq_freq_attr_ro(related_cpus);
+cpufreq_freq_attr_ro(affected_cpus);
+cpufreq_freq_attr_rw(scaling_min_freq);
+cpufreq_freq_attr_rw(scaling_max_freq);
+cpufreq_freq_attr_rw(scaling_governor);
+cpufreq_freq_attr_rw(scaling_setspeed);
 
 static struct attribute *default_attrs[] = {
 	&cpuinfo_min_freq.attr,
drivers/cpufreq/cpufreq_conservative.c +16 -32

72 lines not on this page · raw message

drivers/cpufreq/cpufreq_ondemand.c +12 -28
index bd444dc..c00b25f 100644
@@ -234,12 +234,8 @@ static ssize_t show_sampling_rate_min(struct kobject *kobj,
 	return sprintf(buf, "%u\n", min_sampling_rate);
 }
 
-#define define_one_ro(_name)		\
-static struct global_attr _name =	\
-__ATTR(_name, 0444, show_##_name, NULL)
-
-define_one_ro(sampling_rate_max);
-define_one_ro(sampling_rate_min);
+define_one_global_ro(sampling_rate_max);
+define_one_global_ro(sampling_rate_min);
 
 /* cpufreq_ondemand Governor Tunables */
 #define show_one(file_name, object)					\
@@ -274,12 +270,8 @@ show_one_old(powersave_bias);
 show_one_old(sampling_rate_min);
 show_one_old(sampling_rate_max);
 
-#define define_one_ro_old(object, _name)       \
-static struct freq_attr object =               \
-__ATTR(_name, 0444, show_##_name##_old, NULL)
-
-define_one_ro_old(sampling_rate_min_old, sampling_rate_min);
-define_one_ro_old(sampling_rate_max_old, sampling_rate_max);
+cpufreq_freq_attr_ro_old(sampling_rate_min);
+cpufreq_freq_attr_ro_old(sampling_rate_max);
 
 /*** delete after deprecation time ***/
 
@@ -376,14 +368,10 @@ static ssize_t store_powersave_bias(struct kobject *a, struct attribute *b,
 	return count;
 }
 
-#define define_one_rw(_name) \
-static struct global_attr _name = \
-__ATTR(_name, 0644, show_##_name, store_##_name)
-
-define_one_rw(sampling_rate);
-define_one_rw(up_threshold);
-define_one_rw(ignore_nice_load);
-define_one_rw(powersave_bias);
+define_one_global_rw(sampling_rate);
+define_one_global_rw(up_threshold);
+define_one_global_rw(ignore_nice_load);
+define_one_global_rw(powersave_bias);
 
 static struct attribute *dbs_attributes[] = {
 	&sampling_rate_max.attr,
@@ -415,14 +403,10 @@ write_one_old(up_threshold);
 write_one_old(ignore_nice_load);
 write_one_old(powersave_bias);
 
-#define define_one_rw_old(object, _name)       \
-static struct freq_attr object =               \
-__ATTR(_name, 0644, show_##_name##_old, store_##_name##_old)
-
-define_one_rw_old(sampling_rate_old, sampling_rate);
-define_one_rw_old(up_threshold_old, up_threshold);
-define_one_rw_old(ignore_nice_load_old, ignore_nice_load);
-define_one_rw_old(powersave_bias_old, powersave_bias);
+cpufreq_freq_attr_rw_old(sampling_rate);
+cpufreq_freq_attr_rw_old(up_threshold);
+cpufreq_freq_attr_rw_old(ignore_nice_load);
+cpufreq_freq_attr_rw_old(powersave_bias);
 
 static struct attribute *dbs_attributes_old[] = {
        &sampling_rate_max_old.attr,
include/linux/cpufreq.h +30 -0
index 4de02b1..9f15150 100644
@@ -278,6 +278,27 @@ struct freq_attr {
 	ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count);
 };
 
+#define cpufreq_freq_attr_ro(_name)		\
+static struct freq_attr _name =			\
+__ATTR(_name, 0444, show_##_name, NULL)
+
+#define cpufreq_freq_attr_ro_perm(_name, _perm)	\
+static struct freq_attr _name =			\
+__ATTR(_name, _perm, show_##_name, NULL)
+
+#define cpufreq_freq_attr_ro_old(_name)		\
+static struct freq_attr _name##_old =		\
+__ATTR(_name, 0444, show_##_name##_old, NULL)
+
+#define cpufreq_freq_attr_rw(_name)		\
+static struct freq_attr _name =			\
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+#define cpufreq_freq_attr_rw_old(_name)		\
+static struct freq_attr _name##_old =		\
+__ATTR(_name, 0644, show_##_name##_old, store_##_name##_old)
+
+
 struct global_attr {
 	struct attribute attr;
 	ssize_t (*show)(struct kobject *kobj,
@@ -286,6 +307,15 @@ struct global_attr {
 			 const char *c, size_t count);
 };
 
+#define define_one_global_ro(_name)		\
+static struct global_attr _name =		\
+__ATTR(_name, 0444, show_##_name, NULL)
+
+#define define_one_global_rw(_name)		\
+static struct global_attr _name =		\
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+
 /*********************************************************************
  *                        CPUFREQ 2.6. INTERFACE                     *
  *********************************************************************/
Signature · 1 line
1.7.0
#11 lore raw
In reply to Borislav Petkov
Quoted 11 lines · On Wednesday 24 March 2010 18:46:18 Borislav Petkov wrote:

From: Borislav Petkov <[email protected]>

Hi all,

here's the reworked version after incorporating most of your comments.

In particular, this version adds a /proc/cpuinfo flag and removes the scaling_cur_freq interface overload in favor of cpufreq-aperf userspace tool.

Please review,

Beside the one (Intel/AMD) duplicate APERF/MPERF cpuid check which I expect can get unified, looks fine to me.

Thanks,

Thomas