docs: Configuration path update
PATCH 1/1 docs: Configuration path update
From: Trevor Woerner <[email protected]>
Update the procedure for modifying /etc/inittab's getty line with the correct port and baud values to reflect their current names and locations in the Buildroot configuration.
Signed-off-by Trevor Woerner <[email protected]>
--- docs/buildroot.html | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
docs/buildroot.html +3 -3
@@ -1787,9 +1787,9 @@ Starting dropbear sshd: generating rsa key... generating dsa key... OK</pre> <p>then it means that your system is running, but didn't start a shell on the serial console. In order to have the system start a shell on your serial console, you have to go in the Buildroot - configuration, <code>Target options</code>, enable <code>Generic - serial port config</code>, and select the serial port and speed - you would like to use for the shell. This will automatically tune + configuration, <code>System configuration</code>, and modify + <code>Port to run a getty (login prompt) on</code> and + <code>Baudrate to use</code> as appropriate. This will automatically tune the <code>/etc/inittab</code> file of the generated system so that a shell starts on the correct serial port.</p>
Signature · 1 line
1.7.6.233.gd79bc
PATCH 1/1 docs: Configuration path update
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Trevor" == Trevor Woerner <[email protected]> writes:
Trevor> From: Trevor Woerner <[email protected]>
Trevor> Update the procedure for modifying /etc/inittab's getty line with Trevor> the correct port and baud values to reflect their current names and Trevor> locations in the Buildroot configuration.
Committed, thanks. We're moving the documentation to asciidoc though.
Signature · 1 line
Bye, Peter Korsgaard