Power: DA9052 Battery module V5
PATCH 5/6 Power: DA9052 Battery module V5
Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver for definitions and methods.
This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by David Dajun Chen <[email protected]>
Signed-off-by Ashish Jangam <[email protected]>
---
Changes since v4
- Remove unnecessary type cast
- Improve code readability
Changes since v3
- Included power_supply.h file
- Corrected the definition of DA9052_BAT_THRESHOLD macro
- Changed definition of charger_type_enum
- Added API da9052_battery_read_end_current
- Added API da9052_battery_check_status
- Changed the way of handling the interrupts in da9052_bat_irq Changes since v2
- Correct code styling for inline functions
- Remove averaging algorithm
- Set use_for_apm thru board specific parameter
--- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/da9052-battery.c | 615 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 623 insertions(+), 0 deletions(-) create mode 100644 drivers/power/da9052-battery.c
drivers/power/Kconfig +7 -0
@@ -150,6 +150,13 @@ config BATTERY_DA9030 Say Y here to enable support for batteries charger integrated into DA9030 PMIC. +config BATTERY_DA9052 + tristate "Dialog DA9052 Battery" + depends on PMIC_DA9052 + help + Say Y here to enable support for batteries charger integrated into + DA9052 PMIC. + config BATTERY_MAX17040 tristate "Maxim MAX17040 Fuel Gauge" depends on I2C
drivers/power/Makefile +1 -0
@@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o +obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
drivers/power/da9052-battery.c new file +615 -0
615 lines not on this page · raw message
Signature · 1 line
1.7.1