Skip to contentSkip to conversation

net: ll_temac: Add LL TEMAC driver to u-boot

PATCH Superseded Ricardo Ribalda Delgado 3 participants 5 messages Dec 22, 2011

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/1 net: ll_temac: Add LL TEMAC driver to u-boot

Hello Stefan,
Hello Wolfgang,
Hello Michal,

I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.

Regards!

Signature · 1 line
Ricardo Ribalda
#1 lore raw

PATCH v6 1/1 net: ll_temac: Add LL TEMAC driver to u-boot

Hello Recardo,

Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda Delgado:

Quoted 6 lines

Hello Stefan,
Hello Wolfgang,
Hello Michal,

I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.

OK, thanks for your efforts. Would it be possible for you to test even the latest v7 patch? There were some critical changes between v6 and v7, especially timeout regime, function pointers for plattform specific in/out accessors, and MDIO clock calculation.

Signature · 8 lines
Best regards,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz
#2 lore raw

PATCH v6 1/1 net: ll_temac: Add LL TEMAC driver to u-boot

Hello Stephan

I just checked it, and I am using v7 :) from:
http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ Once it is applied I will post the patches for xilinx-ppc440-generic (mainly instantiate it in the config...)

I have tried to download an image with the dhcp command over 100 and 1000M... I have to work more on it, but it looks promising. If you need an specific test, just say it, tomorrow I will be working with the board.

Thanks again for the patch, it was very needed for u-boot.

Regards

Quoted 28 lines · Stephan Linz

Hello Recardo,

Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda Delgado:

Quoted 6 lines

Hello Stefan,
Hello Wolfgang,
Hello Michal,

I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.

OK, thanks for your efforts. Would it be possible for you to test even the latest v7 patch? There were some critical changes between v6 and v7, especially timeout regime, function pointers for plattform specific in/out accessors, and MDIO clock calculation.

--
Best regards,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz

Signature · 1 line
Ricardo Ribalda
#3 lore raw

PATCH v6 1/1 net: ll_temac: Add LL TEMAC driver to u-boot

Am Donnerstag, den 22.12.2011, 19:58 +0100 schrieb Ricardo Ribalda Delgado:

Quoted 1 line

Hello Stephan

Hello Recardo,

Quoted 3 lines

I just checked it, and I am using v7 :) from:
http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/

OK, fine.

Quoted 3 lines

Once it is
applied I will post the patches for xilinx-ppc440-generic (mainly instantiate it in the config...)

Nice to hear that. So we know the driver consists no bad code and can be applied as fast as possible.

Quoted 7 lines

I have tried to download an image with the dhcp command over 100 and 1000M... I have to work more on it, but it looks promising. If you need an specific test, just say it, tomorrow I will be working with the board.

Thanks again for the patch, it was very needed for u-boot.

:)

br,
Stephan

Quoted 21 lines

Regards

Quoted 16 lines · Stephan Linz

Hello Recardo,

Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda Delgado:

Quoted 6 lines

Hello Stefan,
Hello Wolfgang,
Hello Michal,

I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.

OK, thanks for your efforts. Would it be possible for you to test even the latest v7 patch? There were some critical changes between v6 and v7, especially timeout regime, function pointers for plattform specific in/out accessors, and MDIO clock calculation.

Signature · 8 lines
Best regards,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz
#4 lore raw

PATCH v6 1/1 net: ll_temac: Add LL TEMAC driver to u-boot

In reply to Ricardo Ribalda Delgado

Dear Ricardo Ribalda Delgado,

Quoted 3 lines · In message <CAPybu_3A+PG9LbbWgu4Qb_ZmnewQoVO7UDs_iatRRUTGmMRrPA@mail.gmail.com>…

I have tried the code on a Propietary Virtex5 fx board (ppc440) and it works.... Thanks for your work.

Can you please send a formal "Acked-by:" message then?

[These get picked up by patchwork, so we don;t have to manually edit the commit message. Also, they have a clearly defined meaning.]

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A man either lives life as it happens to him, meets  it  head-on  and
licks it, or he turns his back on it and starts to wither away.
	-- Dr. Boyce, "The Menagerie" ("The Cage"), stardate unknown