Skip to contentSkip to conversation

Add defconfigs for LPC3250 boards

PATCH New Alexandre Belloni 1 participant 2 messages Dec 27, 2011

lore
Share & tools
lore

Alexandre Belloni

author
#0 lore raw

PATCH 1/1 Add defconfigs for LPC3250 boards

Hi,

the following patch will add defconfigs for the three LPC3250 development boards supported by the LPClinux.com community. For now, they are suggesting using LTIB to build the rootfs image but the packages are quite outdated.

I have successfully used buildroot to buils my u-boot, kernel and rootfs images for a custom board based on the ea3250 design.

I chose to use the 2.6.34 repository as the 2.6.39.2 doesn't seem to be fully functionnal (see
http://lpclinux.com/Forums/LPC32xxLinuxPatch0046).

I also fixed the gcc version to 4.3.x as using a later version seems to break the network drivers.

Alexandre Belloni (1):
Add various LPC3250 development board defconfigs

 configs/ea3250_defconfig  |   37 +++++++++++++++++++++++++++++++++++++
 configs/fdi3250_defconfig |   37 +++++++++++++++++++++++++++++++++++++
 configs/phy3250_defconfig |   37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 111 insertions(+), 0 deletions(-)
 create mode 100644 configs/ea3250_defconfig
 create mode 100644 configs/fdi3250_defconfig
 create mode 100644 configs/phy3250_defconfig
Signature · 8 lines
Alexandre Belloni

Adeneo Embedded
Adetel Group

2, ch. du Ruisseau - 69134 Ecully, France

www.adeneo-embedded.com
author
#1 lore raw

PATCH 1/1 Add various LPC3250 development board defconfigs

ea3250: Embedded Artists
http://www.embeddedartists.com/products/kits/lpc3250_kit.php

fdi3250: Future Design Inc.
http://www.teamfdi.com/development-tools-kits/products/6/SOMDIMM-LPC3250

phy3250: Phytec
http://www.phytec.com/products/som/ARM-XScale/phyCORE-ARM9-LPC3250.html

Signed-off-by Alexandre Belloni <[email protected]>
---
 configs/ea3250_defconfig  |   37 +++++++++++++++++++++++++++++++++++++
 configs/fdi3250_defconfig |   37 +++++++++++++++++++++++++++++++++++++
 configs/phy3250_defconfig |   37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 111 insertions(+), 0 deletions(-)
 create mode 100644 configs/ea3250_defconfig
 create mode 100644 configs/fdi3250_defconfig
 create mode 100644 configs/phy3250_defconfig
configs/ea3250_defconfig new file +37 -0
new file mode 100644
index 0000000..6072725
@@ -0,0 +1,37 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="ea3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="ea3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+
configs/fdi3250_defconfig new file +37 -0
new file mode 100644
index 0000000..31e8f58
@@ -0,0 +1,37 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="fdi3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="fdi3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+
configs/phy3250_defconfig new file +37 -0
new file mode 100644
index 0000000..ac65066
@@ -0,0 +1,37 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="phy3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="phy3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+
Signature · 1 line
1.7.7.3