Skip to contentSkip to conversation

mx28evk: Remove 'all' target from Makefile

PATCH New Fabio Estevam 2 participants 4 messages Dec 29, 2011

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/2 mx28evk: Remove 'all' target from Makefile

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by Fabio Estevam <[email protected]>

---
This was first pointed out by Mike Frysinger here:
http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/118719

,but I missed to include it on later patch submissions.

 board/freescale/mx28evk/Makefile |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
board/freescale/mx28evk/Makefile +0 -2
index 7459107..02ce108 100644
@@ -37,8 +37,6 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
-all:	$(ALL)
-
 #########################################################################
 
 # defines $(obj).depend target
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH 2/2 m28evk: Remove 'all' target from Makefile

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by Fabio Estevam <[email protected]>
---
 board/denx/m28evk/Makefile |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
board/denx/m28evk/Makefile +0 -2
index aa16c7d..1fb56d8 100644
@@ -37,8 +37,6 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
-all:	$(ALL)
-
 #########################################################################
 
 # defines $(obj).depend target
Signature · 1 line
1.7.1
#2 lore raw

PATCH 2/2 m28evk: Remove 'all' target from Makefile

Quoted 12 lines

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by Fabio Estevam <[email protected]>
---
 board/denx/m28evk/Makefile |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
board/denx/m28evk/Makefile +0 -0
index aa16c7d..1fb56d8 100644

board/denx/m28evk/Makefile OBJS := $(addprefix $(obj),$(COBJS)) · line 42

Quoted 8 lines
board/denx/m28evk/Makefile +0 -2
@@ -37,8 +37,6 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
-all:	$(ALL)
-
 #########################################################################
 
 # defines $(obj).depend target
Acked-by Marek Vasut <[email protected]>
#3 lore raw

PATCH 1/2 mx28evk: Remove 'all' target from Makefile

In reply to Fabio Estevam
Quoted 17 lines

Remove 'all' target from Makefile, as this is unused code.

Signed-off-by Fabio Estevam <[email protected]>

---
This was first pointed out by Mike Frysinger here:
http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/118719

,but I missed to include it on later patch submissions.

 board/freescale/mx28evk/Makefile |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/board/freescale/mx28evk/Makefile index 7459107..02ce108 100644

board/freescale/mx28evk/Makefile OBJS := $(addprefix $(obj),$(COBJS)) · line 42

Quoted 8 lines
board/freescale/mx28evk/Makefile +0 -2
@@ -37,8 +37,6 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
-all:	$(ALL)
-
 #########################################################################
 
 # defines $(obj).depend target
Acked-by Marek Vasut <[email protected]>