PXA: Remove PXA PCMCIA support

deleted file mode 100644
index 1d76b32..0000000
@@ -1,56 +0,0 @@
-
-These are brief instructions on how to add support for CF adapters to
-custom designed  PXA boards. You need to set the parameters in the
-config file. This should work for most implementations especially if you
-follow the connections of the standard lubbock. Anyway just the block
-marked memory configuration should be touched since the other parameters
-are imposed by the PXA architecture.
-
-EDIT 2010-07-01: in common/cmd_ide.c, having CONFIG_PXA_PCMCIA defined
-would cause looping on inw()/outw() rather than using insw()/outsw(),
-thus making sure IDE / ATA bytes are properly swapped. This behaviour
-is now controlled by CONFIG_IDE_SWAP_IO, therefore PXA boards with
-PCMCIA should #define CONFIG_IDE_SWAP_IO.
-
-#define CONFIG_IDE_SWAP_IO
-
-#define CONFIG_PXA_PCMCIA 1
-#define CONFIG_PXA_IDE 1
-
-#define CONFIG_PCMCIA_SLOT_A 1
-/* just to keep build system happy  */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR     0x28000000
-#define CONFIG_SYS_PCMCIA_MEM_SIZE     0x10000000
-
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00004204
-#define CONFIG_SYS_MCMEM1_VAL		0x00000000
-#define CONFIG_SYS_MCATT0_VAL		0x00010504
-#define CONFIG_SYS_MCATT1_VAL		0x00000000
-#define CONFIG_SYS_MCIO0_VAL		0x00008407
-#define CONFIG_SYS_MCIO1_VAL		0x00000000
-/* memory configuration */
-
-#define CONFIG_SYS_IDE_MAXBUS		1
-/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0x20000000
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x1f0
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0x1f0
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x3f0
-
-
-Another important point is that maybe you have to power the pcmcia
-subsystem. This is very board specific, for an example on how to
-do it please search for CONFIG_EXADRON1 in cmd_pcmcia.c

index 0349508..aa477d4 100644
@@ -27,7 +27,6 @@ LIB	:= $(obj)libpcmcia.o
 
 COBJS-$(CONFIG_I82365) += i82365.o
 COBJS-$(CONFIG_8xx) += mpc8xx_pcmcia.o
-COBJS-$(CONFIG_PXA_PCMCIA) += pxa_pcmcia.o
 COBJS-y += rpx_pcmcia.o
 COBJS-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o
 COBJS-y += tqm8xx_pcmcia.o