Tricorder: Switch env to generic mmc driver
PATCH 1/1 Tricorder: Switch env to generic mmc driver
Because the tricorder uses the CONFIG_OMAP_HSMMC the initialization command is mmc rescan and not mmc init.
Signed-off-by Thomas Weber <[email protected]>
--- include/configs/tricorder.h | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
include/configs/tricorder.h +4 -3
@@ -161,6 +161,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ + "mmcdev=0\0""vram=12M\0" \"lcdmode=800x600\0" \"defaultdisplay=lcd\0" \
@@ -183,10 +184,10 @@"root=ubi0:rootfs " \"rootfstype=ubifs " \"${kernelopts}\0" \ -"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ +"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \"bootscript=echo Running bootscript from mmc ...; " \"source ${loadaddr}\0" \ -"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ +"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \"mmcboot=echo Booting from mmc ...; " \"run mmcargs; " \
@@ -195,7 +196,7 @@"run nandargs; " \"nand read ${loadaddr} 280000 400000; " \"bootm ${loadaddr}\0" \ -"autoboot=if mmc init 0; then " \ +"autoboot=if mmc rescan ${mmcdev}; then " \"if run loadbootscript; then " \"run bootscript; " \"else " \
Signature · 1 line
1.7.8.4
PATCH 1/1 Tricorder: Switch env to generic mmc driver
Quoted 13 lines · Thomas Weber
Because the tricorder uses the
CONFIG_OMAP_HSMMCthe initialization command is mmc rescan and not mmc init.Signed-off-by Thomas Weber <[email protected]>---
?include/configs/tricorder.h | ? ?7 ++++---
?1 files changed, 4 insertions(+), 3 deletions(-)include/configs/tricorder.h +0
-0
include/configs/tricorder.h line 164
Quoted 4 lines
include/configs/tricorder.h +1
-0@@ -161,6 +161,7 @@ ?#define CONFIG_EXTRA_ENV_SETTINGS \ ? ? ? ?"loadaddr=0x82000000\0" \ ? ? ? ?"console=ttyO2,115200n8\0" \ + ? ? ? "mmcdev=0\0"
You forgot a trailing '\' here, but the changes otherwise look correct / complete and it builds with that one change, which I've made and will include in my pull request.
Signature · 1 line
Tom