snd-hda-intel: Power management not enabled until audio is played
Dear ALSA folks,
playing with PowerTOP 1.97 I notice that it lists 100 % usage for the Audio device on several systems [1].
I made sure that power management is enabled.
$ grep snd /etc/modprobe.d/*
…: options snd_hda_intel power_save=1
$ more /sys/module/snd_hda_intel/parameters/power_save_controller
Y
$ more /sys/module/snd_hda_intel/parameters/power_save
0Since I was on AC power pm-utils seems to reset that parameter to not save power. :/
$ sudo su
# echo "1" > /sys/module/snd_hda_intel/parameters/power_save
# exitBut enabling that does not change anything right away. Only after using the device by playing some audio – speaker-test in this case, the power management seems to kick in.
$ more /sys/module/snd_hda_intel/parameters/power_save*
::::::::::::::
/sys/module/snd_hda_intel/parameters/power_save
::::::::::::::
1
::::::::::::::
/sys/module/snd_hda_intel/parameters/power_save_controller
::::::::::::::
Y
$ more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
405056
$ more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
409664
$ more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
413672
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:08:46 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
464644
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:08:52 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
470076
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:09:04 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
482604
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:10:41 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
9640
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
578904
$ date && speaker-test
Sa 11. Feb 10:12:58 CET 2012 speaker-test 1.0.24.2
Wiedergabe-Gerät ist default
Stream-Parameter sind 48000 Hz, S16_LE, 1 Kanäle
Verwende 16 Oktaven rosa Rauschen
Rate ist 48000 Hz (angefordert: 48000 Hz)
Puffergröße von 2048 bis 8192
Periodengröße von 1024 bis 1024
Verwende maximale Puffergröße 8192
Perioden = 4
gesetzt: period_size = 1024
gesetzt: buffer_size = 8192
0 - Vorne links
Zeit pro Periode = 2,828717
0 - Vorne links
Zeit pro Periode = 2,985785
0 - Vorne links
Zeit pro Periode = 2,985784
0 - Vorne links
Zeit pro Periode = 2,985806
0 - Vorne links
Zeit pro Periode = 2,985834
0 - Vorne links
Zeit pro Periode = 2,985798
0 - Vorne links
Zeit pro Periode = 2,985838
0 - Vorne links
^C
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:13:24 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
100732
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
651372
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:13:29 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
105384
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
651372
$ date && more /sys/devices/pci0000\:00/0000\:00\:1b.0/sound/card0/hwC0D0/power_*_acct
Sa 11. Feb 10:24:18 CET 2012
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_off_acct
::::::::::::::
753148
::::::::::::::
/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/power_on_acct
::::::::::::::
652876Is that an error in the driver? I have seen that with Realtek and Conexant devices. Please also find the output of alsa-info.sh [2] attached. There is no difference before and after playing some audio.
$ diff -u alsa-info.txt.beforeplayingaudio alsa-info.txt.afterplayingaudio
--- alsa-info.txt.beforeplayingaudio 2012-02-11 10:11:31.000000000 +0100
+++ alsa-info.txt.afterplayingaudio 2012-02-11 10:13:52.000000000 +0100
@@ -3,7 +3,7 @@
!!ALSA Information Script v 0.4.60
!!################################ -!!Script ran on: Sat Feb 11 09:11:29 UTC 2012
+!!Script ran on: Sat Feb 11 09:13:51 UTC 2012
!!Linux Distribution
@@ -379,7 +379,7 @@
crw-rw----+ 1 root audio 116, 5 Feb 11 10:00 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 4 Feb 11 10:00 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 3 Feb 11 10:00 /dev/snd/pcmC0D0c
-crw-rw----+ 1 root audio 116, 2 Feb 11 10:00 /dev/snd/pcmC0D0p
+crw-rw----+ 1 root audio 116, 2 Feb 11 10:12 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 1 Feb 11 10:00 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Feb 11 10:00 /dev/snd/timerThanks,
Paul
[1] http://lists.lesswatts.org/pipermail/discuss/2012-February/000687.html
[2] http://alsa-project.org/main/index.php/Help_To_Debug
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Sat Feb 11 09:11:29 UTC 2012
!!Linux Distribution
!!------------------
Debian GNU/Linux wheezy/sid \n \l
!!DMI Information
!!---------------
Manufacturer: ASUSTeK Computer INC. Product Name: 701 Product Version: x.x
!!Kernel Information
!!------------------
Kernel release: 3.0.0-1-686-pae Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.24 Library version: 1.0.24.1 Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - No
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
aRts:
Installed - Yes (/usr/bin/artsd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf7eb8000 irq 43
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:2668 (rev 04)
Subsystem: 1043:82a1
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2snd_hda_intel: power_save=1
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 1 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC662 rev1
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0662
Subsystem Id: 0x104382a1
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC662 rev1 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x3d 0x3d]
Converter: stream=0, channel=0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMNode 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMNode 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMNode 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCMNode 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Switch", index=1, device=0
Control: name="Capture Volume", index=1, device=0 Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x89 0x89]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC662 rev1 Analog", type="Audio", device=0 Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x1f 0x1f]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Internal Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 9
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x02 0x02]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19820: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=08, enabled=1
Connection: 1
0x0e
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000173c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x99a3092f: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x2, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0eNode 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1
0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000173c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 2
0x0c* 0x0e
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x40148a05: [N/A] Speaker at Ext N/A
Conn = RCA, Color = Purple DefAssociation = 0x0, Sequence = 0x5
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=12
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 5 Feb 11 10:00 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 4 Feb 11 10:00 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 3 Feb 11 10:00 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 2 Feb 11 10:00 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 1 Feb 11 10:00 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Feb 11 10:00 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Feb 11 10:00 .
drwxr-xr-x 3 root root 180 Feb 11 10:00 ..
lrwxrwxrwx 1 root root 12 Feb 11 10:00 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xf7eb8000 irq 43'
Mixer name : 'Realtek ALC662 rev1'
Components : 'HDA:10ec0662,104382a1,00100101'
Controls : 16
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 61 [95%] [-3.00dB] [on] Front Right: Playback 61 [95%] [-3.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [0.40dB] Front Right: Playback 253 [99%] [0.40dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on] Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 31 [100%] [33.00dB] [on] Front Right: Capture 31 [100%] [33.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 9 [29%] [0.00dB] [off] Front Right: Capture 9 [29%] [0.00dB] [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB] Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 61
value.1 61
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -300
dbvalue.1 -300
}
}
control.2 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.3 {
iface MIXER
name 'Mic Boost Volume'
value.0 2
value.1 2
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 2000
dbvalue.1 2000
}
}
control.4 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.5 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.7 {
iface MIXER
name 'Internal Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.8 {
iface MIXER
name 'Internal Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.9 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Capture Switch'
index 1
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.11 {
iface MIXER
name 'Capture Volume'
value.0 31
value.1 31
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1350
dbmax 3300
dbvalue.0 3300
dbvalue.1 3300
}
}
control.12 {
iface MIXER
name 'Capture Volume'
index 1
value.0 9
value.1 9
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1350
dbmax 3300
dbvalue.0 0
dbvalue.1 0
}
}
control.13 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.14 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.15 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
control.16 {
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
bluetooth
crc16
msr
mperfcpufreq_conservativecpufreq_userspacecpufreq_powersavecpufreq_stats
uinput
fuse
loop
joydevsnd_hda_codec_realteksnd_hda_intelsnd_hda_codecsnd_hwdepsnd_pcm_osssnd_mixer_osssnd_pcmsnd_seq_midi
uvcvideo
i915
evdevusb_storagesnd_rawmidi
usbhid
videodev
media
hid
uas
psmousesnd_seq_midi_eventserio_rawrng_coresnd_seqdrm_kms_helpersnd_timersnd_seq_device
drm
battery
acpower_supply
sndeeepc_laptopsparse_keymap
rfkilli2c_algo_bitpci_hotplug
processor
buttoni2c_core
soundcoresnd_page_alloc
video
ext3
jbd
mbcache
sgsd_modcrc_t10difata_genericata_piix
ahci
libahci
libatauhci_hcdscsi_modehci_hcd
usbcore
atl2
thermalthermal_sys
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x14 0x991301100x15 0x411111f00x16 0x411111f00x18 0x01a198200x19 0x99a3092f0x1a 0x411111f00x1b 0x0121401f0x1c 0x411111f00x1d 0x40148a050x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
!!ALSA/HDA dmesg
!!------------------
[ 8.968743] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.968872] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.969013] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 8.969083] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.013951] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 9.019343] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.019893] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.021715] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
At Sat, 11 Feb 2012 10:59:04 +0100,
Quoted 19 lines · Paul Menzel
Dear ALSA folks,
playing with PowerTOP 1.97 I notice that it lists 100 % usage for the Audio device on several systems [1].
I made sure that power management is enabled.
$ grep snd /etc/modprobe.d/* …: options snd_hda_intel power_save=1 $ more /sys/module/snd_hda_intel/parameters/power_save_controller Y $ more /sys/module/snd_hda_intel/parameters/power_save 0Since I was on AC power pm-utils seems to reset that parameter to not save power. :/
Quoted 7 lines
$ sudo su # echo "1" > /sys/module/snd_hda_intel/parameters/power_save # exitBut enabling that does not change anything right away. Only after using the device by playing some audio –
speaker-testin this case, the power management seems to kick in.
Right, it's a known issue. You don't have to play actually but just opening/closing a device should suffice.
The reason is that changing the sysfs parameter file would change only the variable but doesn't trigger the event by itself. It's possible to add some triggering action, but it'd become fairly messy. So I've postponed the implementation, so far.
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Am Montag, den 13.02.2012, 15:16 +0100 schrieb Takashi Iwai:
Quoted 22 lines
At Sat, 11 Feb 2012 10:59:04 +0100,
Quoted 19 lines · Paul Menzel
playing with PowerTOP 1.97 I notice that it lists 100 % usage for the Audio device on several systems [1].
I made sure that power management is enabled.
$ grep snd /etc/modprobe.d/* …: options snd_hda_intel power_save=1 $ more /sys/module/snd_hda_intel/parameters/power_save_controller Y $ more /sys/module/snd_hda_intel/parameters/power_save 0Since I was on AC power pm-utils seems to reset that parameter to not save power. :/
$ sudo su # echo "1" > /sys/module/snd_hda_intel/parameters/power_save # exit
Quoted 5 lines
Quoted 3 lines
But enabling that does not change anything right away. Only after using the device by playing some audio –
speaker-testin this case, the power management seems to kick in.Right, it's a known issue.
Should I submit a bug report to track that issue?
Quoted 2 lines
You don't have to play actually but just opening/closing a device should suffice.
Is touch /dev/dsp enough? I am thinking about adding that command to some start script.
Quoted 4 lines
The reason is that changing the sysfs parameter file would change only the variable but doesn't trigger the event by itself. It's possible to add some triggering action, but it'd become fairly messy. So I've postponed the implementation, so far.
Understood. I guess most users do not experience that since nowadays the login manager plays some sound opening the device every start up. Mostly advanced users will suffer from this not using such a login manager or desktop environment like GNOME or KDE.
Thanks,
Paul
At Mon, 13 Feb 2012 20:51:26 +0100,
Quoted 24 lines · Paul Menzel
Am Montag, den 13.02.2012, 15:16 +0100 schrieb Takashi Iwai:
Quoted 22 lines
At Sat, 11 Feb 2012 10:59:04 +0100,
Quoted 19 lines · Paul Menzel
playing with PowerTOP 1.97 I notice that it lists 100 % usage for the Audio device on several systems [1].
I made sure that power management is enabled.
$ grep snd /etc/modprobe.d/* …: options snd_hda_intel power_save=1 $ more /sys/module/snd_hda_intel/parameters/power_save_controller Y $ more /sys/module/snd_hda_intel/parameters/power_save 0Since I was on AC power pm-utils seems to reset that parameter to not save power. :/
$ sudo su # echo "1" > /sys/module/snd_hda_intel/parameters/power_save # exit
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
But enabling that does not change anything right away. Only after using the device by playing some audio –
speaker-testin this case, the power management seems to kick in.Right, it's a known issue.
Should I submit a bug report to track that issue?
No need for that. It's a missing feature but no bug.
Quoted 5 lines
Quoted 2 lines
You don't have to play actually but just opening/closing a device should suffice.
Is
touch /dev/dspenough? I am thinking about adding that command to some start script.
I'm not sure whether "touch" program actually works for a device file. Playing a sound like "echo -n | aplay" would work.
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel