Add support for GPIO IR receiver driver

This driver is for GPIO based IR receivers, it can listen only to IR receiver modules which gives demodulated signal as output, this driver only passes the interrupt events to rc framework where pulse and space widths are calculated and input to decoders avaliable.

Ravi Kumar V (1):
rc: Add support for GPIO based IR Receiver driver.

 drivers/media/rc/Kconfig        |    9 ++
 drivers/media/rc/Makefile       |    1 +
 drivers/media/rc/gpio-ir-recv.c |  189 +++++++++++++++++++++++++++++++++++++++
 include/media/gpio-ir-recv.h    |   23 +++++
 4 files changed, 222 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/rc/gpio-ir-recv.c
 create mode 100644 include/media/gpio-ir-recv.h

Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.