Skip to contentSkip to conversation

ASoC: dapm: Check for bias level when powering down

PATCH In review Mark Brown 2 participants 2 messages Feb 22, 2012 – Feb 23, 2012

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 ASoC: dapm: Check for bias level when powering down

Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting.

---
 sound/soc/soc-dapm.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)
sound/soc/soc-dapm.c +9 -3
index 9029aad..3a5adab 100644
@@ -3237,9 +3237,13 @@ static void soc_dapm_shutdown_codec(struct snd_soc_dapm_context *dapm)
 	 * standby.
 	 */
 	if (powerdown) {
-		snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_PREPARE);
+		if (dapm->bias_level == SND_SOC_BIAS_ON)
+			snd_soc_dapm_set_bias_level(dapm,
+						    SND_SOC_BIAS_PREPARE);
 		dapm_seq_run(dapm, &down_list, 0, false);
-		snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_STANDBY);
+		if (dapm->bias_level == SND_SOC_BIAS_PREPARE)
+			snd_soc_dapm_set_bias_level(dapm,
+						    SND_SOC_BIAS_STANDBY);
 	}
 }
 
@@ -3252,7 +3256,9 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card)
 
 	list_for_each_entry(codec, &card->codec_dev_list, list) {
 		soc_dapm_shutdown_codec(&codec->dapm);
-		snd_soc_dapm_set_bias_level(&codec->dapm, SND_SOC_BIAS_OFF);
+		if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
+			snd_soc_dapm_set_bias_level(&codec->dapm,
+						    SND_SOC_BIAS_OFF);
 	}
 }
 
Signature · 1 line
1.7.9.1
Acked-by on v1 1/1
#1 lore raw
Quoted 9 lines · Mark Brown

Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting.

---