Skip to contentSkip to conversation

regulator: Set n_voltages for da9052 regulators

PATCH Applied Axel Lin 2 participants 2 messages Mar 5, 2012

Subsystems (2)
Voltage and current regulator framework Dialog semiconductor drivers
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: Set n_voltages for da9052 regulators

The n_voltages setting for all LDOs and DCDCs are missing in current code.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/da9052-regulator.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/regulator/da9052-regulator.c +4 -0
index 3767364..0689ad4 100644
@@ -400,6 +400,7 @@ static struct regulator_ops da9052_ldo_ops = {
 		.ops = &da9052_ldo5_6_ops,\
 		.type = REGULATOR_VOLTAGE,\
 		.id = _id,\
+		.n_voltages = (max - min) / step + 1, \
 		.owner = THIS_MODULE,\
 	},\
 	.min_uV = (min) * 1000,\

@@ -417,6 +418,7 @@ static struct regulator_ops da9052_ldo_ops = {
 		.ops = &da9052_ldo_ops,\
 		.type = REGULATOR_VOLTAGE,\
 		.id = _id,\
+		.n_voltages = (max - min) / step + 1, \
 		.owner = THIS_MODULE,\
 	},\
 	.min_uV = (min) * 1000,\

@@ -434,6 +436,7 @@ static struct regulator_ops da9052_ldo_ops = {
 		.ops = &da9052_dcdc_ops,\
 		.type = REGULATOR_VOLTAGE,\
 		.id = _id,\
+		.n_voltages = (max - min) / step + 1, \
 		.owner = THIS_MODULE,\
 	},\
 	.min_uV = (min) * 1000,\

@@ -451,6 +454,7 @@ static struct regulator_ops da9052_ldo_ops = {
 		.ops = &da9052_buckperi_ops,\
 		.type = REGULATOR_VOLTAGE,\
 		.id = _id,\
+		.n_voltages = (max - min) / step + 1, \
 		.owner = THIS_MODULE,\
 	},\
 	.min_uV = (min) * 1000,\
Signature · 1 line
1.7.5.4
Applied
#1 lore raw
Quoted 1 line · Axel Lin

The n_voltages setting for all LDOs and DCDCs are missing in current code.

Applied, thanks.