Skip to contentSkip to conversation

qla22xxx: target mode LLD changes + tcm_qla2xxx fabric module

RFC New Nicholas A. Bellinger 1 participant 4 messages Mar 9, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover qla22xxx: target mode LLD changes + tcm_qla2xxx fabric module

From: Nicholas Bellinger <[email protected]>

Greetings all,

The following is the fifth RFC series for adding qla2xxx LLD target mode support into mainline with 8.03.07.13-k @ v3.3-rc6 code. This along with accompanying tcm_qla2xxx.ko fabric module using target-core v4.1 infrastructure allows Qlogic

Quoted 1 line

= 24xx series PCI-Express adapters to function in hardware Fibre Channel

target mode operation.

Along with a number of bugfixes from different folks, the biggest changes during RFC-v5 is the removal of pre 24xx series (PCI-X) HW support from qla_target + qla2xxx LLD changes (1K less LOC than RFC-v4), and enabling of ABORT_TASK usabe in tcm_qla2xxx with the current set of v3.4 target-pending/for-next patches in the queue for v3.4-rc1. This series is available directly here:

git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git qla_tgt-rfc-v5

As before, this series has been broken up into reviewable sections and should considered a 'for-3.4' -> 'for-3.5' item following the TODO items below.

The changes since RFC-v4 in mid December include:

*) Fix cmd_kref leak on target shutdown in qla_tgt_do_work() (roland) *) Drop pre 24xx series support for target-mode (hch + nab)
*) Fix tcm_qla2xxx_do_rsp check condition cmd_kref leak (nab)
*) Hookup ABORT_TASK into qla_target/tcm_qla2xxx code (nab)
*) Convert to target_submit_tmr() usage in tcm_qla2xxx (andy + nab) *) Fix sign of FCP_RESID field for status with RESID_OVER (roland) *) Fix NULL pointer dereference for qla_tgt_do_work() w/ new session (joern) *) Set disable_target_scan=1 when initiator-mode is disabled (nab) *) Set correct nport_handle in __qla_tgt_send_term_exchange() (roland) *) Seperate out per qla_tgt session management from qla_hw_data->hardware_lock
to use se_session->sess_kref (nab)
*) Convert qla_target.c to use qla2x00_start_iocbs() (nab)

Unfortuately little much progress has been made since RFC-v4 to address the TODO item wrt to mixed target/initiator mode operation on a HW per port (struct qla_hw_data) context basis between target-core and scsi-core subsystems.

Note to testers that patch #1 by default sets the following qla2xxx module parameter at the head of qla_target.c to enforce qla2xxx LLD module wide target-mode and disable initiator mode:

static char *qlini_mode = QLA2XXX_INI_MODE_STR_DISABLED; module_param(qlini_mode, charp, S_IRUGO); MODULE_PARM_DESC(qlini_mode,
"Determines when initiator mode will be enabled. Possible values: " "\"exclusive\" - initiator mode will be enabled on load, " "disabled on enabling target mode and then on disabling target mode " "enabled back; "
"\"disabled\" (default) - initiator mode will never be enabled; " "\"enabled\" - initiator mode will always stay enabled.");

For an initial mainline merge, we still expect to use initiator-mode by default (QLA2XXX_INI_MODE_STR_EXCLUSIVE) and disable target mode by default. The qla2xxx module parameter should be used to enable target mode for qla2xxx until scsi-core + target-core interaction can be addressed.

(PING for feedback from hch, jejb, andrew, other folks on scsi-core + target-core
interaction here..?)

So along with resolving this issue wrt mixed T/I mode between subsystems, other remaining items include:

*) Fix HW session level and ConfigFS ACL level shutdown race in target core (nab) *) Move write-pending abort checks into process-context in target core (nab) *) Finish up NPIV support for /sys/kernel/config/target/qla2xxx_npiv/ and determine
remaining NPIV I/O path items. (nab + madhu)
*) FC jammer testing to verify bugfix for SRRs with non zero relative offsets before
re-enabling them. (qlogic linux team)
*) Multi-queue support with qla_hw_data->mqenable=1 (arun + qlogic team) *) Global event handling for active sessions in qla_tgt_reset() (nab) *) Support for target mode on 16 Gb/sec hw (qlogic team)

Thanks again to everyone who has been testing lio-core code in their respective setups, and to the Qlogic + Pure teams for their feedback and patches.

--nab

Nicholas Bellinger (3):
qla2xxx: Add LLD target-mode infrastructure for >= 24xx series
qla2xxx: Enable >= 24xx target-mode support in SCSI LLD
tcm_qla2xxx: Add >= 24xx series fabric module for target-core

 drivers/scsi/qla2xxx/Kconfig       |    8 +
 drivers/scsi/qla2xxx/Makefile      |    3 +-
 drivers/scsi/qla2xxx/qla_attr.c    |    5 +-
 drivers/scsi/qla2xxx/qla_dbg.c     |    5 +
 drivers/scsi/qla2xxx/qla_dbg.h     |    5 +
 drivers/scsi/qla2xxx/qla_def.h     |   69 +-
 drivers/scsi/qla2xxx/qla_gbl.h     |    7 +
 drivers/scsi/qla2xxx/qla_gs.c      |    4 +-
 drivers/scsi/qla2xxx/qla_init.c    |   92 +-
 drivers/scsi/qla2xxx/qla_iocb.c    |  102 +-
 drivers/scsi/qla2xxx/qla_isr.c     |   87 +-
 drivers/scsi/qla2xxx/qla_mbx.c     |  116 +-
 drivers/scsi/qla2xxx/qla_mid.c     |   17 +-
 drivers/scsi/qla2xxx/qla_os.c      |  133 +-
 drivers/scsi/qla2xxx/qla_target.c  | 4730 ++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_target.h  |  984 ++++++++
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 1961 +++++++++++++++
 drivers/scsi/qla2xxx/tcm_qla2xxx.h |  149 ++
 18 files changed, 8431 insertions(+), 46 deletions(-)
 create mode 100644 drivers/scsi/qla2xxx/qla_target.c
 create mode 100644 drivers/scsi/qla2xxx/qla_target.h
 create mode 100644 drivers/scsi/qla2xxx/tcm_qla2xxx.c
 create mode 100644 drivers/scsi/qla2xxx/tcm_qla2xxx.h
Signature · 1 line
1.7.2.5
#1 lore raw

RFC v5 1/3 qla2xxx: Add LLD target-mode infrastructure for >= 24xx series

From: Nicholas Bellinger <[email protected]>

This patch adds the internal qla_target.[c,h] support pieces for qla2xxx LLD target mode for 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c.

The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the following API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies:

struct qla_tgt_func_tmpl {

        int (*handle_cmd)(struct scsi_qla_host *, struct qla_tgt_cmd *,
                        unsigned char *, uint32_t, int, int, int);
        int (*handle_data)(struct qla_tgt_cmd *);
        int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, uint32_t, uint8_t, uint32_t);
        void (*free_cmd)(struct qla_tgt_cmd *);
        void (*free_session)(struct qla_tgt_sess *);

        int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
                                        void *, uint8_t *, uint16_t);
        struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
                                                const uint16_t);
        struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
                                                const uint8_t *);
        void (*clear_nacl_from_fcport_map)(struct qla_tgt_sess *);
        void (*put_sess)(struct qla_tgt_sess *);
};
Cc Andrew Vasquez <[email protected]>
Cc Arun Easi <[email protected]>
Cc Giridhar Malavali <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc James Bottomley <[email protected]>
Cc Roland Dreier <[email protected]>
Cc Joern Engel <[email protected]>
Cc Madhuranath Iyengar <[email protected]>
---
 drivers/scsi/qla2xxx/Makefile     |    2 +-
 drivers/scsi/qla2xxx/qla_target.c | 4730 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_target.h |  984 ++++++++
 3 files changed, 5715 insertions(+), 1 deletions(-)
 create mode 100644 drivers/scsi/qla2xxx/qla_target.c
 create mode 100644 drivers/scsi/qla2xxx/qla_target.h
drivers/scsi/qla2xxx/Makefile +1 -1
index 5df782f..702931ff 100644
@@ -1,5 +1,5 @@
 qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
 		qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o \
-        qla_nx.o
+        qla_nx.o qla_target.o
 
 obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
drivers/scsi/qla2xxx/qla_target.c new file +4730 -0

2,994 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_target.h new file +984 -0

984 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.2.5

Part of the diff is not shown here. View the raw message.

#2 lore raw

RFC v5 2/3 qla2xxx: Enable >= 24xx target-mode support in SCSI LLD

In reply to Nicholas A. Bellinger

From: Nicholas Bellinger <[email protected]>

This patch enables target mode support within the existing qla2xxx LLD using qla_target.c logic. This includes the following changes:

*) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl

*) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qla_tgt_* prefixed functions.

*) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation

*) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp().

More specific checks for qla_hw_data->qla2x_tmpl include:

*) control plane:

qla_init.c:qla2x00_rport_del() -> qla_tgt_fc_port_deleted() qla_init.c:qla2x00_reg_remote_port() -> qla_tgt_fc_port_added() qla_init.c:qla2x00_device_resync() -> qla2x00_mark_device_lost()

*) I/O path:

qla_isr.c:qla2x00_async_event() -> qla_tgt_async_event() qla_isr.c:qla2x00_process_response_queue() -> qla_tgt_response_pkt_all_vps() qla_isr.c:qla24xx_process_response_queue() -> qla_tgt_response_pkt_all_vps()

*) interrupt handlers:

qla_isr.c:qla24xx_intr_handler() -> qla_tgt_24xx_process_atio_queue() +
qla24xx_process_response_queue()
qla24xx_msix_default(): qla_tgt_24xx_process_atio_queue() +
qla24xx_process_response_queue()

Cc Andrew Vasquez <[email protected]>
Cc Arun Easi <[email protected]>
Cc Giridhar Malavali <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc James Bottomley <[email protected]>
Cc Roland Dreier <[email protected]>
Cc Joern Engel <[email protected]>
Cc Madhuranath Iyengar <[email protected]>
---
 drivers/scsi/qla2xxx/qla_attr.c |    5 +-
 drivers/scsi/qla2xxx/qla_dbg.c  |    5 ++
 drivers/scsi/qla2xxx/qla_dbg.h  |    5 ++
 drivers/scsi/qla2xxx/qla_def.h  |   69 ++++++++++++++++++--
 drivers/scsi/qla2xxx/qla_gbl.h  |    7 ++
 drivers/scsi/qla2xxx/qla_gs.c   |    4 +-
 drivers/scsi/qla2xxx/qla_init.c |   92 ++++++++++++++++++++++++---
 drivers/scsi/qla2xxx/qla_iocb.c |  102 +++++++++++++++++++++++++++++-
 drivers/scsi/qla2xxx/qla_isr.c  |   87 +++++++++++++++++++++++++-
 drivers/scsi/qla2xxx/qla_mbx.c  |  116 ++++++++++++++++++++++++++++++++--
 drivers/scsi/qla2xxx/qla_mid.c  |   17 +++++-
 drivers/scsi/qla2xxx/qla_os.c   |  133 ++++++++++++++++++++++++++++++++++-----
 12 files changed, 597 insertions(+), 45 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +4 -1
index 9f41b3b..250cde8 100644
@@ -5,6 +5,7 @@
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 #include "qla_def.h"
+#include "qla_target.h"
 
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
@@ -1869,6 +1870,7 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 	fc_host_supported_speeds(vha->host) =
 		fc_host_supported_speeds(base_vha->host);
 
+	qla_tgt_vport_create(vha, ha);
 	qla24xx_vport_disable(fc_vport, disable);
 
 	if (ha->flags.cpu_affinity_enabled) {
@@ -2082,7 +2084,8 @@ qla2x00_init_host_attr(scsi_qla_host_t *vha)
 	fc_host_dev_loss_tmo(vha->host) = ha->port_down_retry_count;
 	fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
 	fc_host_port_name(vha->host) = wwn_to_u64(vha->port_name);
-	fc_host_supported_classes(vha->host) = FC_COS_CLASS3;
+	fc_host_supported_classes(vha->host) = ha->enable_class_2 ?
+			(FC_COS_CLASS2|FC_COS_CLASS3) : FC_COS_CLASS3;
 	fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports;
 	fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count;
 
drivers/scsi/qla2xxx/qla_dbg.c +5 -0
index 45cbf0b..1847f58 100644
@@ -28,6 +28,11 @@
  * | ISP82XX Specific             |       0xb052       |    		|
  * | MultiQ                       |       0xc00b       |		|
  * | Misc                         |       0xd00b       |		|
+ * | Target Mode		  |	  0xe037       |		|
+ * | Target Mode Management	  |	  0xe14e       |		|
+ * | Target Mode SCSI Packets	  |	  0xe20b       |		|
+ * | Target Mode Scatterlists	  |	  0xe30c       |		|
+ * | Target Mode Task Management  |	  0xe409       |		|
  * ----------------------------------------------------------------------
  */
 
drivers/scsi/qla2xxx/qla_dbg.h +5 -0
index 5f1b6d9..c785a38 100644
@@ -276,3 +276,8 @@ ql_log_pci(uint32_t, struct pci_dev *pdev, int32_t, const char *fmt, ...);
 #define ql_dbg_misc	0x00010000 /* For dumping everything that is not
 				    * not covered by upper categories
 				    */
+#define ql_dbg_tgt	0x00008000 /* Target mode */
+#define ql_dbg_tgt_mgt	0x00004000 /* Target mode management */
+#define ql_dbg_tgt_pkt	0x00002000 /* Target mode SCSI packets */
+#define ql_dbg_tgt_sgl	0x00001000 /* Target mode scatterlists */
+#define ql_dbg_tgt_tmr	0x00000800 /* Target mode task management */
drivers/scsi/qla2xxx/qla_def.h +63 -6

118 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_gbl.h +7 -0
index 408679b..6989fdd 100644
@@ -178,6 +178,7 @@ extern int  qla2x00_vp_abort_isp(scsi_qla_host_t *);
 /*
  * Global Function Prototypes in qla_iocb.c source file.
  */
+
 extern uint16_t qla2x00_calc_iocbs_32(uint16_t);
 extern uint16_t qla2x00_calc_iocbs_64(uint16_t);
 extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
@@ -191,6 +192,8 @@ extern uint16_t qla24xx_calc_iocbs(scsi_qla_host_t *, uint16_t);
 extern void qla24xx_build_scsi_iocbs(srb_t *, struct cmd_type_7 *, uint16_t);
 extern int qla24xx_dif_start_scsi(srb_t *);
 
+extern void *qla2x00_alloc_iocbs(scsi_qla_host_t *, srb_t *);
+extern int qla2x00_issue_marker(scsi_qla_host_t *, int);
 
 /*
  * Global Function Prototypes in qla_mbx.c source file.
@@ -243,6 +246,9 @@ extern int
 qla2x00_init_firmware(scsi_qla_host_t *, uint16_t);
 
 extern int
+qla2x00_get_node_name_list(scsi_qla_host_t *, void **, int *);
+
+extern int
 qla2x00_get_port_database(scsi_qla_host_t *, fc_port_t *, uint8_t);
 
 extern int
@@ -541,6 +547,7 @@ extern int qla82xx_restart_isp(scsi_qla_host_t *);
 
 /* IOCB related functions */
 extern int qla82xx_start_scsi(srb_t *);
+extern void qla2x00_start_iocbs(struct scsi_qla_host *, struct req_que *);
 
 /* Interrupt related */
 extern irqreturn_t qla82xx_intr_handler(int, void *);
drivers/scsi/qla2xxx/qla_gs.c +3 -1
index 4aea4ae..006fc0b 100644
@@ -5,6 +5,7 @@
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 #include "qla_def.h"
+#include "qla_target.h"
 
 static int qla2x00_sns_ga_nxt(scsi_qla_host_t *, fc_port_t *);
 static int qla2x00_sns_gid_pt(scsi_qla_host_t *, sw_info_t *);
@@ -545,7 +546,8 @@ qla2x00_rff_id(scsi_qla_host_t *vha)
 	ct_req->req.rff_id.port_id[1] = vha->d_id.b.area;
 	ct_req->req.rff_id.port_id[2] = vha->d_id.b.al_pa;
 
-	ct_req->req.rff_id.fc4_feature = BIT_1;
+	qla_tgt_rff_id(vha, ct_req);
+
 	ct_req->req.rff_id.fc4_type = 0x08;		/* SCSI - FCP */
 
 	/* Execute MS IOCB */
drivers/scsi/qla2xxx/qla_init.c +83 -9

212 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_iocb.c +101 -1

126 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_isr.c +85 -2

191 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_mbx.c +110 -6

164 lines not on this page · raw message

drivers/scsi/qla2xxx/qla_mid.c +15 -2
index f488cc6..2d1e5b6 100644
@@ -6,6 +6,7 @@
  */
 #include "qla_def.h"
 #include "qla_gbl.h"
+#include "qla_target.h"
 
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
@@ -49,6 +50,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 
 	spin_lock_irqsave(&ha->vport_slock, flags);
 	list_add_tail(&vha->list, &ha->vp_list);
+	ha->tgt_vp_map[vp_id].vha = vha;
 	spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 	mutex_unlock(&ha->vport_lock);
@@ -79,6 +81,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
 		spin_lock_irqsave(&ha->vport_slock, flags);
 	}
 	list_del(&vha->list);
+	ha->tgt_vp_map[vha->vp_idx].vha = NULL;
 	spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 	vp_id = vha->vp_idx;
@@ -144,12 +147,16 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 int
 qla24xx_disable_vp(scsi_qla_host_t *vha)
 {
+	struct qla_hw_data *ha = vha->hw;
 	int ret;
 
 	ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
 	atomic_set(&vha->loop_state, LOOP_DOWN);
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 
+	/* Remove port id from vp target map */
+	ha->tgt_vp_map[vha->d_id.b.al_pa].idx = 0;
+
 	qla2x00_mark_vp_devices_dead(vha);
 	atomic_set(&vha->vp_state, VP_FAILED);
 	vha->flags.management_server_logged_in = 0;
@@ -267,6 +274,8 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
 int
 qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 {
+	int ret;
+
 	/*
 	 * Physical port will do most of the abort and recovery work. We can
 	 * just treat it as a loop down
@@ -288,8 +297,12 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 		qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
 
 	ql_dbg(ql_dbg_taskm, vha, 0x801d,
-	    "Scheduling enable of Vport %d.\n", vha->vp_idx);
-	return qla24xx_enable_vp(vha);
+		"Scheduling enable of Vport %d.\n", vha->vp_idx);
+	ret = qla24xx_enable_vp(vha);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static int
drivers/scsi/qla2xxx/qla_os.c +116 -17

293 lines not on this page · raw message

Signature · 1 line
1.7.2.5
#3 lore raw

RFC v5 3/3 tcm_qla2xxx: Add >= 24xx series fabric module for target-core

In reply to Nicholas A. Bellinger

From: Nicholas Bellinger <[email protected]>

This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access.

This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values for qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code.

The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session().

Cc Andrew Vasquez <[email protected]>
Cc Arun Easi <[email protected]>
Cc Giridhar Malavali <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc James Bottomley <[email protected]>
Cc Roland Dreier <[email protected]>
Cc Joern Engel <[email protected]>
Cc Madhuranath Iyengar <[email protected]>
---
 drivers/scsi/qla2xxx/Kconfig       |    8 +
 drivers/scsi/qla2xxx/Makefile      |    1 +
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 1961 ++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/tcm_qla2xxx.h |  149 +++
 4 files changed, 2119 insertions(+), 0 deletions(-)
 create mode 100644 drivers/scsi/qla2xxx/tcm_qla2xxx.c
 create mode 100644 drivers/scsi/qla2xxx/tcm_qla2xxx.h
drivers/scsi/qla2xxx/Kconfig +8 -0
index 6208d56..6c3ce52 100644
@@ -25,3 +25,11 @@ config SCSI_QLA_FC
 	Firmware images can be retrieved from:
 
 		ftp://ftp.qlogic.com/outgoing/linux/firmware/
+
+config TCM_QLA2XXX
+	tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
+	depends on SCSI_QLA_FC && TARGET_CORE
+	select LIBFC
+	default n
+	---help---
+	Say Y here to enable the TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs
drivers/scsi/qla2xxx/Makefile +1 -0
index 702931ff..dce7d78 100644
@@ -3,3 +3,4 @@ qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
         qla_nx.o qla_target.o
 
 obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
+obj-$(CONFIG_TCM_QLA2XXX) += tcm_qla2xxx.o
drivers/scsi/qla2xxx/tcm_qla2xxx.c new file +1961 -0

1,961 lines not on this page · raw message

drivers/scsi/qla2xxx/tcm_qla2xxx.h new file +149 -0

149 lines not on this page · raw message

Signature · 1 line
1.7.2.5