automake: upgrade from 1.11.2 to 1.11.3
PATCH 1/7 automake: upgrade from 1.11.2 to 1.11.3
From: Nitin A Kamble <[email protected]>
Removed already upstream patch:
automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch
Rebased these patches to the newer code:
automake/prefer-cpio-over-pax-for-ustar-archives.patch automake/python-libdir.patch
Changed the tarball name from bz2 to gz, as the bz2 tar ball is not published for the 1.11.3 version.
---
meta/recipes-devtools/automake/automake.inc | 2 +-
...utomake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch | 118 --------------------
.../prefer-cpio-over-pax-for-ustar-archives.patch | 30 +++--
.../automake/automake/python-libdir.patch | 32 +++---
.../{automake_1.11.2.bb => automake_1.11.3.bb} | 8 +-
5 files changed, 36 insertions(+), 154 deletions(-)
delete mode 100644 meta/recipes-devtools/automake/automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch
rename meta/recipes-devtools/automake/{automake_1.11.2.bb => automake_1.11.3.bb} (85%)meta/recipes-devtools/automake/automake.inc +1 -1
@@ -5,7 +5,7 @@ LICENSE = "GPLv2" HOMEPAGE = "http://www.gnu.org/software/automake/" SECTION = "devel" -SRC_URI = "${GNU_MIRROR}/automake/automake-${PV}.tar.bz2 " +SRC_URI = "${GNU_MIRROR}/automake/automake-${PV}.tar.gz" inherit autotools
meta/recipes-devtools/automake/automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch deleted +0 -118
118 lines not on this page · raw message
meta/recipes-devtools/automake/automake/prefer-cpio-over-pax-for-ustar-archives.patch +17 -13
@@ -15,11 +15,15 @@ Upstream-Status: Pending Signed-off-by: Tom Rini <[email protected]> -Index: automake-1.11.1/m4/tar.m4 +Updated for version 1.11.3: +Signed-off-by: Nitin A Kamble <[email protected]> +Date: 2011/03/14 + +Index: automake-1.11.3/m4/tar.m4 =================================================================== ---- automake-1.11.1.orig/m4/tar.m4 -+++ automake-1.11.1/m4/tar.m4 -@@ -30,7 +30,7 @@ m4_if([$1], [v7], +--- automake-1.11.3.orig/m4/tar.m4 2012-01-31 03:41:18.000000000 -0800 ++++ automake-1.11.3/m4/tar.m4 2012-03-14 17:36:11.901303777 -0700 +@@ -31,7 +31,7 @@ m4_if([$1], [v7], [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works.
@@ -28,16 +32,16 @@ Index: automake-1.11.1/m4/tar.m4 _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. -Index: automake-1.11.1/Makefile.in +Index: automake-1.11.3/Makefile.in =================================================================== ---- automake-1.11.1.orig/Makefile.in -+++ automake-1.11.1/Makefile.in -@@ -44,7 +44,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/a - $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \ +--- automake-1.11.3.orig/Makefile.in 2012-02-01 02:37:59.000000000 -0800 ++++ automake-1.11.3/Makefile.in 2012-03-14 17:38:03.530869197 -0700 +@@ -62,7 +62,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/a $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \ - $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \ -- $(top_srcdir)/m4/substnot.m4 $(top_srcdir)/m4/tar.m4 \ -+ $(top_srcdir)/m4/substnot.m4 \ - $(top_srcdir)/configure.ac + $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/silent.m4 \ + $(top_srcdir)/m4/strip.m4 $(top_srcdir)/m4/substnot.m4 \ +- $(top_srcdir)/m4/tar.m4 $(top_srcdir)/configure.ac ++ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
meta/recipes-devtools/automake/automake/python-libdir.patch +14 -18
@@ -2,11 +2,11 @@ Upstream-Status: Inappropriate [embedded specific] Signed-off-by: Kumar Gala <[email protected]> -Index: automake-1.11.1/m4/python.m4 +Index: automake-1.11.3/m4/python.m4 =================================================================== ---- automake-1.11.1.orig/m4/python.m4 -+++ automake-1.11.1/m4/python.m4 -@@ -88,12 +88,13 @@ python2.1 python2.0]) +--- automake-1.11.3.orig/m4/python.m4 2012-01-31 03:41:18.000000000 -0800 ++++ automake-1.11.3/m4/python.m4 2012-03-14 17:48:49.194509698 -0700 +@@ -92,12 +92,13 @@ AC_DEFUN([AM_PATH_PYTHON], [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`]) AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
@@ -22,16 +22,14 @@ Index: automake-1.11.1/m4/python.m4 AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}']) dnl At times (like when building shared libraries) you may want -@@ -122,7 +123,7 @@ python2.1 python2.0]) - am_py_prefix=$prefix - fi - am_cv_python_pythondir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(0,0,prefix='$am_py_prefix'))" 2>/dev/null || -- echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"` -+ echo "$PYTHON_LIB_PREFIX/python$PYTHON_VERSION/site-packages"` +@@ -127,13 +128,13 @@ AC_DEFUN([AM_PATH_PYTHON], case $am_cv_python_pythondir in $am_py_prefix*) am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'` -@@ -132,7 +133,7 @@ python2.1 python2.0]) +- am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"` ++ am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix/lib,$PYTHON_LIB_PREFIX,"` + ;; + *) case $am_py_prefix in /usr|/System*) ;; *)
@@ -40,16 +38,14 @@ Index: automake-1.11.1/m4/python.m4 ;; esac ;; -@@ -160,7 +161,7 @@ python2.1 python2.0]) - am_py_exec_prefix=$exec_prefix - fi - am_cv_python_pyexecdir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(1,0,prefix='$am_py_exec_prefix'))" 2>/dev/null || -- echo "$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages"` -+ echo "$PYTHON_LIB_PREFIX/python$PYTHON_VERSION/site-packages"` +@@ -162,13 +163,13 @@ AC_DEFUN([AM_PATH_PYTHON], case $am_cv_python_pyexecdir in $am_py_exec_prefix*) am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'` -@@ -170,7 +171,7 @@ python2.1 python2.0]) +- am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"` ++ am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix/lib,$PYTHON_LIB_PREFIX,"` + ;; + *) case $am_py_exec_prefix in /usr|/System*) ;; *)
meta/recipes-devtools/automake/automake_1.11.3.bb renamed from meta/recipes-devtools/automake/automake_1.11.2.bb +4 -4
@@ -37,12 +37,12 @@ PATHFIXPATCH_virtclass-nativesdk = "" SRC_URI += "${PATHFIXPATCH} \ file://prefer-cpio-over-pax-for-ustar-archives.patch \ file://python-libdir.patch \ - file://automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch \ file://py-compile-compile-only-optimized-byte-code.patch" -PR = "r2" -SRC_URI[md5sum] = "18194e804d415767bae8f703c963d456" -SRC_URI[sha256sum] = "4f46d1f9380c8a3506280750f630e9fc915cb1a435b724be56b499d016368718" +SRC_URI[md5sum] = "93ecb319f0365cb801990b00f658d026" +SRC_URI[sha256sum] = "921b5188057e57bdd9c0ba06e21d0b0ea7dafa61a9bd08a2b041215bcff12f55" + +PR = "r0" do_install () { oe_runmake 'DESTDIR=${D}' install
Signature · 1 line
1.7.7.6
PATCH 2/7 distro-tracking: update status of recipes
From: Nitin A Kamble <[email protected]>
--- .../conf/distro/include/distro_tracking_fields.inc | 24 ++++++++++--------- 1 files changed, 13 insertions(+), 11 deletions(-)
meta/conf/distro/include/distro_tracking_fields.inc +13 -11
@@ -37,7 +37,8 @@ RECIPE_MANUAL_CHECK_DATE_pn-libpcre = "Feb 01, 2012" RECIPE_MAINTAINER_pn-libpcre = "Nitin A Kamble <[email protected]>" DISTRO_PN_ALIAS_pn-libpcre = "Mandriva=libpcre0 Fedora=pcre" -RECIPE_LATEST_VERSION_pn-bdwgc = "7.2alpha5" +RECIPE_LATEST_VERSION_pn-bdwgc = "20110107" +RECIPE_NO_UPDATE_REASON_pn-bdwgc = "20110107 is same as the 7.2alpha5" RECIPE_LAST_UPDATE_pn-bdwgc = "Feb 01, 2012" RECIPE_MANUAL_CHECK_DATE_pn-bdwgc = "Feb 01, 2012" RECIPE_MAINTAINER_pn-bdwgc = "Nitin A Kamble <[email protected]>"
@@ -3089,9 +3090,9 @@ RECIPE_NO_UPDATE_REASON_pn-autoconf="seeing rpm issue with the 2.68 version, a b RECIPE_MAINTAINER_pn-autoconf = "Nitin A Kamble <[email protected]>" RECIPE_STATUS_pn-automake="green" -RECIPE_LATEST_VERSION_pn-automake="1.11.1" -RECIPE_LAST_UPDATE_pn-automake = "Jan 29, 2010" -RECIPE_MANUAL_CHECK_DATE_pn-automake = "Jul 06, 2011" +RECIPE_LATEST_VERSION_pn-automake="1.11.3" +RECIPE_LAST_UPDATE_pn-automake = "Mar 14, 2012" +RECIPE_MANUAL_CHECK_DATE_pn-automake = "Mar 14, 2012" RECIPE_MAINTAINER_pn-automake = "Nitin A Kamble <[email protected]>" RECIPE_STATUS_pn-bison="green"
@@ -3278,9 +3279,9 @@ RECIPE_LAST_UPDATE_pn-mpfr = "Nov 15, 2011" RECIPE_MAINTAINER_pn-mpfr = "Nitin A Kamble <[email protected]>" RECIPE_STATUS_pn-gmp="green" -RECIPE_LATEST_VERSION_pn-gmp="5.0.3" -RECIPE_LAST_UPDATE_pn-gmp = "Feb 01, 2012" -RECIPE_MANUAL_CHECK_DATE_pn-gmp = "Feb 01, 2012" +RECIPE_LATEST_VERSION_pn-gmp="5.0.4" +RECIPE_LAST_UPDATE_pn-gmp = "Mar 14, 2012" +RECIPE_MANUAL_CHECK_DATE_pn-gmp = "Mar 14, 2012" RECIPE_MAINTAINER_pn-gmp = "Nitin A Kamble <[email protected]>" RECIPE_STATUS_pn-libmpc="green"
@@ -5933,10 +5934,11 @@ RECIPE_STATUS_pn-groff = "red" RECIPE_LATEST_VERSION_pn-groff = "1.21" RECIPE_NO_UPDATE_REASON_pn-groff = "1.18.1.4 is latest GPLv2 Version no 1.21" -RECIPE_STATUS_pn-eglibc = "red" -RECIPE_LATEST_VERSION_pn-eglibc = "2.13-r15508" -RECIPE_LAST_UPDATE_pn-eglibc = "Nov 16, 2011" -RECIPE_MANUAL_CHECK_DATE_pn-eglibc = "Nov 16, 2011" +RECIPE_STATUS_pn-eglibc = "green" +RECIPE_LATEST_VERSION_pn-eglibc = "git:16540" +RECIPE_LAST_UPDATE_pn-eglibc = "Jan 01, 2012" +RECIPE_MANUAL_CHECK_DATE_pn-eglibc = "Jan 01, 2012" +RECIPE_MAINTAINER_pn-eglibc = "Nitin A Kamble <[email protected]>" RECIPE_STATUS_pn-lighttpd = "red" RECIPE_LAST_UPDATE_pn-lighttpd = "Jul 28, 2011"
Signature · 1 line
1.7.7.6
PATCH 3/7 python: fix install when libdir is not "lib"
In reply to [email protected]From: Nitin A Kamble <[email protected]>
This commit fixes python's install issue of not finding the native pythong binray modules.
--- .../python/fix_for_using_different_libdir.patch | 78 ++++++++++++++++++++ meta/recipes-devtools/python/python_2.7.2.bb | 2 + 2 files changed, 80 insertions(+), 0 deletions(-) create mode 100644 meta/recipes-devtools/python/python/fix_for_using_different_libdir.patch
meta/recipes-devtools/python/python/fix_for_using_different_libdir.patch new file +78 -0
@@ -0,0 +1,78 @@ +Upstream-Status: Inappropriate [Embedded specific] + +This patch fixes issuing with different libdir like lib64. +This patch makes the native python binary modules findable +in the install process of the host python. + +Signed-Off-By: Nitin A Kamble <[email protected]> +Date: 2012/03/14 + +Index: Python-2.7.2/Lib/sysconfig.py +=================================================================== +--- Python-2.7.2.orig/Lib/sysconfig.py ++++ Python-2.7.2/Lib/sysconfig.py +@@ -7,10 +7,10 @@ from os.path import pardir, realpath + + _INSTALL_SCHEMES = { + 'posix_prefix': { +- 'stdlib': '{base}/lib/python{py_version_short}', +- 'platstdlib': '{platbase}/lib/python{py_version_short}', +- 'purelib': '{base}/lib/python{py_version_short}/site-packages', +- 'platlib': '{platbase}/lib/python{py_version_short}/site-packages', ++ 'stdlib': '{base}/'+sys.lib+'/python{py_version_short}', ++ 'platstdlib': '{platbase}/'+sys.lib+'/python{py_version_short}', ++ 'purelib': '{base}/'+sys.lib+'/python{py_version_short}/site-packages', ++ 'platlib': '{platbase}/'+sys.lib+'/python{py_version_short}/site-packages', + 'include': '{base}/include/python{py_version_short}', + 'platinclude': '{platbase}/include/python{py_version_short}', + 'scripts': '{base}/bin', +@@ -65,10 +65,10 @@ _INSTALL_SCHEMES = { + 'data' : '{userbase}', + }, + 'posix_user': { +- 'stdlib': '{userbase}/lib/python{py_version_short}', +- 'platstdlib': '{userbase}/lib/python{py_version_short}', +- 'purelib': '{userbase}/lib/python{py_version_short}/site-packages', +- 'platlib': '{userbase}/lib/python{py_version_short}/site-packages', ++ 'stdlib': '{userbase}/'+sys.lib+'/python{py_version_short}', ++ 'platstdlib': '{userbase}/'+sys.lib+'/python{py_version_short}', ++ 'purelib': '{userbase}/'+sys.lib+'/python{py_version_short}/site-packages', ++ 'platlib': '{userbase}/'+sys.lib+'/python{py_version_short}/site-packages', + 'include': '{userbase}/include/python{py_version_short}', + 'scripts': '{userbase}/bin', + 'data' : '{userbase}', +Index: Python-2.7.2/Makefile.pre.in +=================================================================== +--- Python-2.7.2.orig/Makefile.pre.in ++++ Python-2.7.2/Makefile.pre.in +@@ -928,25 +928,25 @@ libinstall: build_all $(srcdir)/Lib/$(PL + done; \ + done + $(INSTALL_DATA) $(srcdir)/LICENSE $(DESTDIR)$(LIBDEST)/LICENSE.txt +- PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ ++ PYTHONPATH=$(DESTDIR)$(LIBDEST):${CROSSPYTHONPATH} $(RUNSHARED) \ + $(HOSTPYTHON) -Wi -tt $(DESTDIR)$(LIBDEST)/compileall.py \ + -d $(LIBDEST) -f \ + -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ + $(DESTDIR)$(LIBDEST) +- PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ ++ PYTHONPATH=$(DESTDIR)$(LIBDEST):${CROSSPYTHONPATH} $(RUNSHARED) \ + $(HOSTPYTHON) -Wi -tt -O $(DESTDIR)$(LIBDEST)/compileall.py \ + -d $(LIBDEST) -f \ + -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' \ + $(DESTDIR)$(LIBDEST) +- -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ ++ -PYTHONPATH=$(DESTDIR)$(LIBDEST):${CROSSPYTHONPATH} $(RUNSHARED) \ + $(HOSTPYTHON) -Wi -t $(DESTDIR)$(LIBDEST)/compileall.py \ + -d $(LIBDEST)/site-packages -f \ + -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages +- -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ ++ -PYTHONPATH=$(DESTDIR)$(LIBDEST):${CROSSPYTHONPATH} $(RUNSHARED) \ + $(HOSTPYTHON) -Wi -t -O $(DESTDIR)$(LIBDEST)/compileall.py \ + -d $(LIBDEST)/site-packages -f \ + -x badsyntax $(DESTDIR)$(LIBDEST)/site-packages +- -PYTHONPATH=$(DESTDIR)$(LIBDEST) $(RUNSHARED) \ ++ -PYTHONPATH=$(DESTDIR)$(LIBDEST):${CROSSPYTHONPATH} $(RUNSHARED) \ + $(HOSTPYTHON) -Wi -t -c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()" + + # Create the PLATDIR source directory, if one wasn't distributed..
meta/recipes-devtools/python/python_2.7.2.bb +2 -0
@@ -21,6 +21,7 @@ SRC_URI += "\ file://add-md5module-support.patch \ file://host_include_contamination.patch \ file://sys_platform_is_now_always_linux2.patch \ + file://fix_for_using_different_libdir.patch \ " S = "${WORKDIR}/Python-${PV}"
@@ -99,6 +100,7 @@ do_install() { oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/pgen \ HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python \ + CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ \ STAGING_LIBDIR=${STAGING_LIBDIR} \ STAGING_INCDIR=${STAGING_INCDIR} \ BUILD_SYS=${BUILD_SYS} HOST_SYS=${HOST_SYS} \
Signature · 1 line
1.7.7.6
PATCH 4/7 pciutils: fix a do_compile failure
In reply to [email protected]From: Nitin A Kamble <[email protected]>
Avoid this issue:
| ln -s libpci.so.3.1.9 libpci.so | ln: failed to create symbolic link `libpci.so': File exists | make[1]: *** [libpci.so] Error 1 | make[1]: Leaving directory `/srv/home/nitin/builds/build-multilib/tmp/work/x86_64-poky-linux/pciutils-3.1.9-r0/pciutils-3.1.9/lib' | make: *** [lib/libpci.so] Error 2 | ERROR: oe_runmake failed
NOTE: package pciutils-3.1.9-r0: task do_compile: Failed
PR not bumped as there are no changes in the output packages.
--- meta/recipes-bsp/pciutils/pciutils_3.1.9.bb | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
meta/recipes-bsp/pciutils/pciutils_3.1.9.bb +5 -0
@@ -33,6 +33,11 @@ do_configure () { ) } +do_compile_prepend () { + # Avoid this error: ln: failed to create symbolic link `libpci.so': File exists + rm -f ${S}/lib/libpci.so +} + export PREFIX = "${prefix}" export SBINDIR = "${sbindir}" export SHAREDIR = "${datadir}"
Signature · 1 line
1.7.7.6
PATCH 5/7 python-pyrex: quite packaging warnings
In reply to [email protected]From: Nitin A Kamble <[email protected]>
This removes these packaging warnings:
WARNING: For recipe python-pyrex, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share WARNING: /usr/share/lib WARNING: /usr/share/lib/python2.7 WARNING: /usr/share/lib/python2.7/site-packages WARNING: /usr/share/lib/python2.7/site-packages/Pyrex WARNING: /usr/share/lib/python2.7/site-packages/Pyrex/Compiler WARNING: /usr/share/lib/python2.7/site-packages/Pyrex/Compiler/Lexicon.pickle
--- meta/recipes-devtools/python/python-pyrex_0.9.9.bb | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
meta/recipes-devtools/python/python-pyrex_0.9.9.bb +3 -1
@@ -5,7 +5,7 @@ SECTION = "devel/python" LICENSE = "Apache-2.0" LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=771d472f53f933033f57eeee7808e5bd" SRCNAME = "Pyrex" -PR = "ml2" +PR = "r3" SRC_URI = "\ http://www.cosc.canterbury.ac.nz/greg.ewing/python/${SRCNAME}/${SRCNAME}-${PV}.tar.gz \
@@ -17,3 +17,5 @@ SRC_URI[sha256sum] = "5f87df06831d0b3412eb4bc9d3fc2ee7bfae1b913d7da8c23ab2bf5699 S = "${WORKDIR}/${SRCNAME}-${PV}" inherit distutils + +FILES_${PN} += "${datadir}${base_libdir}/${PYTHON_DIR}/site-packages/Pyrex/Compiler/Lexicon.pickle"
Signature · 1 line
1.7.7.6
PATCH 6/7 python-pycurl: fix packaging warnings
In reply to [email protected]From: Nitin A Kamble <[email protected]>
This commit fixes these packaging warnings:
WARNING: For recipe python-pycurl, the following files/directories were
installed but not shipped in any package:
WARNING: /usr/share/share
PR not bumber because no change in the output packages.
--- .../python/python-pycurl_7.19.0.bb | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
meta/recipes-devtools/python/python-pycurl_7.19.0.bb +4 -0
@@ -29,3 +29,7 @@ export STAGING_INCDIR export STAGING_LIBDIR BBCLASSEXTEND = "native" + +do_install_append() { + rm -rf ${D}${datadir}/share +}
Signature · 1 line
1.7.7.6
Re: [PATCH 6/7] python-pycurl: fix packaging warnings
Quoted 19 lines · On Fri, 2012-03-16 at 12:00 -0700, [email protected] wrote:
From: Nitin A Kamble <[email protected]>
This commit fixes these packaging warnings:
WARNING: For recipe python-pycurl, the following files/directories were
installed but not shipped in any package:
WARNING:/usr/share/sharePR not bumber because no change in the output packages.
Signed-off-by Nitin A Kamble <[email protected]>--- .../python/python-pycurl_7.19.0.bb | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)meta/recipes-devtools/python/python-pycurl_7.19.0.bb +0
-0
meta/recipes-devtools/python/python-pycurl_7.19.0.bb export STAGING_INCDIR · line 35
Quoted 7 lines
meta/recipes-devtools/python/python-pycurl_7.19.0.bb +4
-0@@ -29,3 +29,7 @@ export STAGING_INCDIR export STAGING_LIBDIR BBCLASSEXTEND = "native" + +do_install_append() { + rm -rf ${D}${datadir}/share +}
What is actually in there? Is that a file or a directory?
This is one of the cases it might be worth looking at why it exists at all as something looks wrong there at a deeper level...
Cheers,
Richard
Re: [PATCH 6/7] python-pycurl: fix packaging warnings
Quoted 43 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Richard Purdie
Sent: Friday, March 16, 2012 4:50 PM
To: Patches and discussions about the oe-core layer
Subject: Re: [OE-core] [PATCH 6/7] python-pycurl: fix packaging warningsQuoted 4 lines · On Fri, 2012-03-16 at 12:00 -0700, [email protected] wrote:
From: Nitin A Kamble <[email protected]>
This commit fixes these packaging warnings:
WARNING: For recipe python-pycurl, the following files/directorieswere
Review
Quoted 11 lines
installed but not shipped in any package:
WARNING:/usr/share/sharePR not bumber because no change in the output packages.
Signed-off-by Nitin A Kamble <[email protected]>--- .../python/python-pycurl_7.19.0.bb | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)(quoted diff) +0
-0b/meta/recipes-devtools/python/python-pycurl_7.19.0.bb
meta/recipes-devtools/python/python-pycurl_7.19.0.bb export STAGING_INCDIR · line 35
Quoted 11 lines
index d9fe465..8b849d7 100644
meta/recipes-devtools/python/python-pycurl_7.19.0.bb +4
-0@@ -29,3 +29,7 @@ export STAGING_INCDIR export STAGING_LIBDIR BBCLASSEXTEND = "native" + +do_install_append() { + rm -rf ${D}${datadir}/share +}What is actually in there? Is that a file or a directory?
Quoted 3 lines
This is one of the cases it might be worth looking at why it exists at all as something looks wrong there at a deeper level...
That is an empty directory. Yes this need further looking why that directory existed in the 1st place.
Nitin
Quoted 9 lines
Cheers,
Richard
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Re: [PATCH 6/7] python-pycurl: fix packaging warnings
Quoted 41 lines · Nitin A
Quoted 41 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Richard Purdie
Sent: Friday, March 16, 2012 4:50 PM
To: Patches and discussions about the oe-core layer
Subject: Re: [OE-core] [PATCH 6/7] python-pycurl: fix packaging warningsQuoted 4 lines · On Fri, 2012-03-16 at 12:00 -0700, [email protected] wrote:
From: Nitin A Kamble <[email protected]>
This commit fixes these packaging warnings:
WARNING: For recipe python-pycurl, the following files/directorieswere
Review
Quoted 11 lines
installed but not shipped in any package:
WARNING:/usr/share/sharePR not bumber because no change in the output packages.
Signed-off-by Nitin A Kamble <[email protected]>--- .../python/python-pycurl_7.19.0.bb | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)(quoted diff) +0
-0b/meta/recipes-devtools/python/python-pycurl_7.19.0.bb
meta/recipes-devtools/python/python-pycurl_7.19.0.bb export STAGING_INCDIR · line 35
Quoted 11 lines
index d9fe465..8b849d7 100644
meta/recipes-devtools/python/python-pycurl_7.19.0.bb +4
-0@@ -29,3 +29,7 @@ export STAGING_INCDIR export STAGING_LIBDIR BBCLASSEXTEND = "native" + +do_install_append() { + rm -rf ${D}${datadir}/share +}What is actually in there? Is that a file or a directory?
Quoted 4 lines
Quoted 3 lines
This is one of the cases it might be worth looking at why it exists at all as something looks wrong there at a deeper level...
That is an empty directory. Yes this need further looking why that directory existed in the 1st place.
For empty directories, at least use rmdir, then if they suddenly gain files, we'd see a failure rather than silently still working.
Cheers,
Richard
PATCH 7/7 git: fix packaging warnings
In reply to [email protected]From: Nitin A Kamble <[email protected]>
This commits fixes these packaging warnings
WARNING: For recipe git, the following files/directories were installed
but not shipped in any package:
WARNING: /usr/lib/perl-native WARNING: /usr/lib/perl-native/perl WARNING: /usr/lib/perl-native/perl/5.14.2 WARNING: /usr/lib/perl-native/perl/5.14.2/Git.pm WARNING: /usr/lib/perl-native/perl/5.14.2/perllocal.pod WARNING: /usr/lib/perl-native/perl/5.14.2/auto WARNING: /usr/lib/perl-native/perl/5.14.2/auto/Git WARNING: /usr/lib/perl-native/perl/5.14.2/auto/Git/.packlist
PR not bumber because no change in the output packages.
--- meta/recipes-devtools/git/git.inc | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
meta/recipes-devtools/git/git.inc +2 -0
@@ -16,6 +16,7 @@ do_install () { oe_runmake install DESTDIR="${D}" bindir=${bindir} \ template_dir=${datadir}/git-core/templates \ GIT_PYTHON_DIR=${D}${datadir}/git-core/python + rm -rf ${D}${libdir}/perl-native } do_install_append_virtclass-native() {
@@ -47,6 +48,7 @@ RDEPENDS_${PN}-perltools = "${PN} perl perl-module-file-path findutils" PACKAGES =+ "${PN}-python" FILES_${PN}-python = "${libdir}/python*" + # git-tk package with gitk and git-gui PACKAGES =+ "${PN}-tk" #RDEPENDS_${PN}-tk = "${PN} tk tcl"
Signature · 1 line
1.7.7.6
Re: [PATCH 7/7] git: fix packaging warnings
Dear Nitin,
Am Freitag, den 16.03.2012, 12:00 -0700 schrieb [email protected]:
Quoted 14 lines
From: Nitin A Kamble <[email protected]>
This commits fixes these packaging warnings
WARNING: For recipe git, the following files/directories were installed
but not shipped in any package:WARNING: /usr/lib/perl-native WARNING: /usr/lib/perl-native/perl WARNING: /usr/lib/perl-native/perl/5.14.2 WARNING: /usr/lib/perl-native/perl/5.14.2/Git.pm WARNING: /usr/lib/perl-native/perl/5.14.2/perllocal.pod WARNING: /usr/lib/perl-native/perl/5.14.2/auto WARNING: /usr/lib/perl-native/perl/5.14.2/auto/Git WARNING: /usr/lib/perl-native/perl/5.14.2/auto/Git/.packlist
Quoted 1 line
PR not bumber because no change in the output packages.
bumpe*d*
Quoted 18 lines
Signed-off-by Nitin A Kamble <[email protected]>--- meta/recipes-devtools/git/git.inc | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)meta/recipes-devtools/git/git.inc +1
-0@@ -16,6 +16,7 @@ do_install () { oe_runmake install DESTDIR="${D}" bindir=${bindir} \ template_dir=${datadir}/git-core/templates \ GIT_PYTHON_DIR=${D}${datadir}/git-core/python + rm -rf ${D}${libdir}/perl-native } do_install_append_virtclass-native() {
meta/recipes-devtools/git/git.inc RDEPENDS_${PN}-perltools = "${PN} perl perl-module-file-path findutils" · line 51
Quoted 4 lines
meta/recipes-devtools/git/git.inc +1
-0@@ -47,6 +48,7 @@ RDEPENDS_${PN}-perltools = "${PN} perl perl-module-file-path findutils" PACKAGES =+ "${PN}-python" FILES_${PN}-python = "${libdir}/python*" +
This extra line seems to have been snuck in.
meta/recipes-devtools/git/git.inc RDEPENDS_${PN}-perltools = "${PN} perl perl-module-file-path findutils" · line 54
Quoted 3 lines
meta/recipes-devtools/git/git.inc +0
-0# git-tk package with gitk and git-gui PACKAGES =+ "${PN}-tk" #RDEPENDS_${PN}-tk = "${PN} tk tcl"
Thanks,
Paul
cover Misc Fixes and upgrades
From: Nitin A Kamble <[email protected]>
The following changes since commit 0676db79755b49b660f34e1c00769327fc299c58:
tcl: Fix bad RPATH QA warning (2012-03-16 16:47:44 +0000)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib nitin/misc
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
Nitin A Kamble (7):
automake: upgrade from 1.11.2 to 1.11.3
distro-tracking: update status of recipes
python: fix install when libdir is not "lib"
pciutils: fix a do_compile failure
python-pyrex: quite packaging warnings
python-pycurl: fix packaging warnings
git: fix packaging warnings
.../conf/distro/include/distro_tracking_fields.inc | 24 ++--
meta/recipes-bsp/pciutils/pciutils_3.1.9.bb | 5 +
meta/recipes-devtools/automake/automake.inc | 2 +-
...utomake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch | 118 --------------------
.../prefer-cpio-over-pax-for-ustar-archives.patch | 30 +++--
.../automake/automake/python-libdir.patch | 32 +++---
.../{automake_1.11.2.bb => automake_1.11.3.bb} | 8 +-
meta/recipes-devtools/git/git.inc | 2 +
.../python/python-pycurl_7.19.0.bb | 4 +
meta/recipes-devtools/python/python-pyrex_0.9.9.bb | 4 +-
.../python/fix_for_using_different_libdir.patch | 78 +++++++++++++
meta/recipes-devtools/python/python_2.7.2.bb | 2 +
12 files changed, 143 insertions(+), 166 deletions(-)
delete mode 100644 meta/recipes-devtools/automake/automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch
rename meta/recipes-devtools/automake/{automake_1.11.2.bb => automake_1.11.3.bb} (85%)
create mode 100644 meta/recipes-devtools/python/python/fix_for_using_different_libdir.patchSignature · 1 line
1.7.7.6
Re: [PATCH 0/7] Misc Fixes and upgrades
Quoted 4 lines · On 03/16/2012 12:00 PM, [email protected] wrote:
From: Nitin A Kamble<[email protected]>
The following changes since commit
0676db79755b49b660f34e1c00769327fc299c58:
Quoted 8 lines
tcl: Fix bad RPATH QA warning (2012-03-16 16:47:44 +0000)
are available in the git repository at:
git://git.pokylinux.org/poky-contribnitin/misc
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/miscNitin A Kamble (7):
automake: upgrade from 1.11.2 to 1.11.3
Not Merged
Quoted 20 lines
distro-tracking: update status of recipes
python: fix install when libdir is not "lib"
pciutils: fix ado_compilefailure
python-pyrex: quite packaging warnings
python-pycurl: fix packaging warnings
git: fix packaging warnings.../conf/distro/include/distro_tracking_fields.inc | 24 ++-- meta/recipes-bsp/pciutils/pciutils_3.1.9.bb | 5 + meta/recipes-devtools/automake/automake.inc | 2 +- ...utomake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch | 118 -------------------- .../prefer-cpio-over-pax-for-ustar-archives.patch | 30 +++-- .../automake/automake/python-libdir.patch | 32 +++--- .../{automake_1.11.2.bb => automake_1.11.3.bb} | 8 +- meta/recipes-devtools/git/git.inc | 2 + .../python/python-pycurl_7.19.0.bb | 4 + meta/recipes-devtools/python/python-pyrex_0.9.9.bb | 4 +- .../python/fix_for_using_different_libdir.patch | 78 +++++++++++++ meta/recipes-devtools/python/python_2.7.2.bb | 2 + 12 files changed, 143 insertions(+), 166 deletions(-)
Quoted 4 lines
delete mode 100644
meta/recipes-devtools/automake/automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patchrename meta/recipes-devtools/automake/{automake_1.11.2.bb => automake_1.11.3.bb} (85%) create mode 100644meta/recipes-devtools/python/python/fix_for_using_different_libdir.patch
All but the automake update was merged into OE-Core
Thanks
Sau!