Skip to contentSkip to conversation

2.6.20-rt8 BUG at startup

DISCUSSION Gerrit Binnenmars 1 participant 1 message Apr 25, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

On an ARM XSCALE running on a gumstix platform I get the following BUG report at startup after applying the -rt8 patches.

BUG: at kernel/sched.c:4031 __schedule()
[<c001cfd8>] (dump_stack+0x0/0x24) from [<c014c214>] (__schedule+0x714/0x764)
[<c014bb00>] (__schedule+0x0/0x764) from [<c014c44c>] (schedule+0xcc/0x114)
[<c014c380>] (schedule+0x0/0x114) from [<c0043f8c>] (kthread+0xc8/0x128)
 r4 = 00000000
[<c0043ec4>] (kthread+0x0/0x128) from [<c0031548>] (do_exit+0x0/in860)
 r7 = 00000000  r6 = 00000000  r5 = 00000000  r4 = 00000000
---------------------------

| preempt count: 00000000 ]
| 0-level deep critical section nesting:
----------------------------------------

This is the warning that is displayed only once to indicate that the irqs are not disabled? How can this be solved? On the gumstix mailing list this is reported several times without any response.

Please CC me personally.

Greetings Gerrit