Skip to contentSkip to conversation

sound/pci/hda: CX20549 doesn't need pin_amp_workaround.

PATCH In review Michael Karcher 2 participants 2 messages Apr 5, 2012 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 5/6 sound/pci/hda: CX20549 doesn't need pin_amp_workaround.

CX20549 (ctx5045) doesn't accept data on index 1 for output pins, as shown in the following hda-var transaction:

  $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126
  nid = 0x10, verb = 0x300, param = 0xb126
  value = 0x0
  $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001
  nid = 0x10, verb = 0xb00, param = 0x8001
  value = 0x0
sound/pci/hda/patch_conexant.c +0 -1
index 8d7a977..3ab7b25 100644
@@ -1087,7 +1087,6 @@ static int patch_cxt5045(struct hda_codec *codec)
 	if (!spec)
 		return -ENOMEM;
 	codec->spec = spec;
-	codec->pin_amp_workaround = 1;
 
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(cxt5045_dac_nids);
Signature · 1 line
1.7.9.1
#1 lore raw

At Thu, 05 Apr 2012 15:30:35 +0200,

Quoted 10 lines · Michael Karcher

CX20549 (ctx5045) doesn't accept data on index 1 for output pins, as shown in the following hda-var transaction:

  $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126
  nid = 0x10, verb = 0x300, param = 0xb126
  value = 0x0
  $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001
  nid = 0x10, verb = 0xb00, param = 0x8001
  value = 0x0

OK, it's good to know. Could you fix it in the corresponding part in patch_conexant_auto(), too?

Takashi

Quoted 17 lines
sound/pci/hda/patch_conexant.c +0 -1
index 8d7a977..3ab7b25 100644
@@ -1087,7 +1087,6 @@ static int patch_cxt5045(struct hda_codec *codec)
 	if (!spec)
 		return -ENOMEM;
 	codec->spec = spec;
-	codec->pin_amp_workaround = 1;
 
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(cxt5045_dac_nids);
Signature · 1 line
1.7.9.1