Add more DMT and common modes
Subsystems (2)
cover Add more DMT and common modes
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modes
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
- ajax
PATCH 1/12 drm/edid: Document drm_mode_find_dmt
--- drivers/gpu/drm/drm_edid.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
drivers/gpu/drm/drm_edid.c +10 -0
@@ -486,6 +486,16 @@ static void edid_fixup_preferred(struct drm_connector *connector, preferred_mode->type |=DRM_MODE_TYPE_PREFERRED ; } +/* +* drm_mode_find_dmt - Create a copy of a mode if present in DMT +* @dev: Device to duplicate against +* @hsize: Mode width +* @vsize: Mode height +* @fresh: Mode refresh rate +* +* Walk the DMT mode list looking for a match for the given parameters. +* Return a newly allocated copy of the mode, or NULL if not found. +*/ struct drm_display_mode *drm_mode_find_dmt (struct drm_device *dev,int hsize,int vsize,int fresh) {
Signature · 1 line
1.7.7.6
PATCH 2/12 drm/edid: Rewrite drm_mode_find_dmt search loop
In reply to Adam JacksonNo functional change, but will make an upcoming change clearer.
--- drivers/gpu/drm/drm_edid.c | 19 ++++++++++--------- 1 files changed, 10 insertions(+), 9 deletions(-)
drivers/gpu/drm/drm_edid.c +10 -9
@@ -499,20 +499,21 @@ static void edid_fixup_preferred(struct drm_connector *connector,struct drm_display_mode *drm_mode_find_dmt (struct drm_device *dev,int hsize,int vsize,int fresh) { -struct drm_display_mode *mode =NULL ;int i;for (i =0 ; i < drm_num_dmt_modes; i++) {const struct drm_display_mode *ptr = &drm_dmt_modes[i]; -if (hsize == ptr->hdisplay && - vsize == ptr->vdisplay && - fresh ==drm_mode_vrefresh (ptr)) { -/* get the expected default mode */ - mode =drm_mode_duplicate (dev, ptr); -break ; - } +if (hsize != ptr->hdisplay) +continue ; +if (vsize != ptr->vdisplay) +continue ; +if (fresh !=drm_mode_vrefresh (ptr)) +continue ; + +return drm_mode_duplicate (dev, ptr); } -return mode; + +return NULL ; }EXPORT_SYMBOL (drm_mode_find_dmt);
Signature · 1 line
1.7.7.6
PATCH 3/12 drm/edid: Allow drm_mode_find_dmt to hunt for reduced-blanking modes
In reply to Adam JacksonIt won't find any, yet. Fix up callers to match: standard mode codes will look prefer r-b modes for a given size if present, EST3 mode codes will look for exactly the r-b-ness mentioned in the mode code. This might mean fewer modes matched for EST3 mode codes between now and when the DMT mode list regrows the r-b modes, but practically speaking EST3 codes don't exist in the wild.
--- drivers/gpu/drm/drm_edid.c | 37 ++++++++++++++++++++++++------------- drivers/gpu/drm/drm_fb_helper.c | 2 +- include/drm/drm_crtc.h | 3 ++- 3 files changed, 27 insertions(+), 15 deletions(-)
drivers/gpu/drm/drm_edid.c +24 -13
@@ -486,18 +486,29 @@ static void edid_fixup_preferred(struct drm_connector *connector, preferred_mode->type |=DRM_MODE_TYPE_PREFERRED ; } +static bool +mode_is_rb (const struct drm_display_mode *mode) +{ +return (mode->htotal - mode->hdisplay ==160 ) && + (mode->hsync_end - mode->hdisplay ==80 ) && + (mode->hsync_end - mode->hsync_start ==32 ) && + (mode->vsync_start - mode->vdisplay ==3 ); +} +/* * drm_mode_find_dmt - Create a copy of a mode if present in DMT * @dev: Device to duplicate against * @hsize: Mode width * @vsize: Mode height * @fresh: Mode refresh rate +* @rb: Mode reduced-blanking-ness * * Walk the DMT mode list looking for a match for the given parameters. * Return a newly allocated copy of the mode, or NULL if not found. */ struct drm_display_mode *drm_mode_find_dmt (struct drm_device *dev, -int hsize,int vsize,int fresh) +int hsize,int vsize,int fresh, +bool rb) {int i;
@@ -509,6 +520,8 @@ struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,continue ;if (fresh !=drm_mode_vrefresh (ptr))continue ; +if (rb !=mode_is_rb (ptr)) +continue ;return drm_mode_duplicate (dev, ptr); }
@@ -742,10 +755,17 @@ drm_mode_std(struct drm_connector *connector, struct edid *edid, }/* check whether it can be found in default mode table */ - mode =drm_mode_find_dmt (dev, hsize, vsize, vrefresh_rate); +if (drm_monitor_supports_rb (edid)) { + mode =drm_mode_find_dmt (dev, hsize, vsize, vrefresh_rate, + true); +if (mode) +return mode; + } + mode =drm_mode_find_dmt (dev, hsize, vsize, vrefresh_rate, false);if (mode)return mode; +/* okay, generate it */ switch (timing_level) {case LEVEL_DMT :break ;
@@ -920,15 +940,6 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, }static bool -mode_is_rb (const struct drm_display_mode *mode) -{ -return (mode->htotal - mode->hdisplay ==160 ) && - (mode->hsync_end - mode->hdisplay ==80 ) && - (mode->hsync_end - mode->hsync_start ==32 ) && - (mode->vsync_start - mode->vdisplay ==3 ); -} - -static bool mode_in_hsync_range (const struct drm_display_mode *mode,struct edid *edid,u8 *t) {
@@ -1073,8 +1084,8 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing) mode =drm_mode_find_dmt (connector->dev, est3_modes[m].w, est3_modes[m].h, - est3_modes[m].r -/*, est3_modes[m].rb */ ); + est3_modes[m].r, + est3_modes[m].rb);if (mode) {drm_mode_probed_add (connector, mode); modes++;
drivers/gpu/drm/drm_fb_helper.c +1 -1
@@ -1083,7 +1083,7 @@ static bool drm_target_cloned(struct drm_fb_helper *fb_helper,/* try and find a 1024x768 mode on each connector */ can_clone = true; - dmt_mode =drm_mode_find_dmt (fb_helper->dev,1024 ,768 ,60 ); + dmt_mode =drm_mode_find_dmt (fb_helper->dev,1024 ,768 ,60 , false);for (i =0 ; i < fb_helper->connector_count; i++) {
include/drm/drm_crtc.h +2 -1
@@ -1015,7 +1015,8 @@ extern int drm_edid_header_is_valid(const u8 *raw_edid);extern bool drm_edid_block_valid (u8 *raw_edid);extern bool drm_edid_is_valid (struct edid *edid);struct drm_display_mode *drm_mode_find_dmt (struct drm_device *dev, -int hsize,int vsize,int fresh); +int hsize,int vsize,int fresh, +bool rb);extern int drm_mode_create_dumb_ioctl (struct drm_device *dev,void *data,struct drm_file *file_priv);
Signature · 1 line
1.7.7.6
PATCH 4/12 drm/edid: Remove a misleading comment
In reply to Adam Jacksonmode_in_range() handles what this was warning about.
--- drivers/gpu/drm/drm_edid.c | 4 ---- 1 files changed, 0 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_edid.c +0 -4
@@ -1016,10 +1016,6 @@ mode_in_range(const struct drm_display_mode *mode, struct edid *edid,return true; } -/* -* XXX If drm_dmt_modes ever regrows the CVT-R modes (and it will) this will -* need to account for them. -*/ static int drm_gtf_modes_for_range (struct drm_connector *connector,struct edid *edid,struct detailed_timing *timing)
Signature · 1 line
1.7.7.6
PATCH 5/12 drm/edid: s/drm_gtf_modes_for_range/drm_dmt_modes_for_range/
In reply to Adam JacksonSlightly more honest naming.
--- drivers/gpu/drm/drm_edid.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_edid.c +2 -2
@@ -1017,7 +1017,7 @@ mode_in_range(const struct drm_display_mode *mode, struct edid *edid, }static int -drm_gtf_modes_for_range (struct drm_connector *connector,struct edid *edid, +drm_dmt_modes_for_range (struct drm_connector *connector,struct edid *edid,struct detailed_timing *timing) {int i, modes =0 ;
@@ -1045,7 +1045,7 @@ do_inferred_modes(struct detailed_timing *timing, void *c)int gtf = (closure->edid->features &DRM_EDID_FEATURE_DEFAULT_GTF );if (gtf && data->type ==EDID_DETAIL_MONITOR_RANGE ) - closure->modes +=drm_gtf_modes_for_range (closure->connector, + closure->modes +=drm_dmt_modes_for_range (closure->connector, closure->edid, timing); }
Signature · 1 line
1.7.7.6
PATCH 6/12 drm/edid: Add the reduced blanking DMT modes to the DMT list
In reply to Adam JacksonCopied from the list in xserver.
--- drivers/gpu/drm/drm_edid_modes.h | 94 +++++++++++++++++++++++++++++++++++++- 1 files changed, 93 insertions(+), 1 deletions(-)
drivers/gpu/drm/drm_edid_modes.h +93 -1
@@ -30,7 +30,6 @@/* * Autogenerated from the DMT spec. * This table is copied from xfree86/modes/xf86EdidModes.c. -* But the mode with Reduced blank feature is deleted. */ static const struct drm_display_mode drm_dmt_modes[] = {/* 640x350@85Hz */
@@ -81,6 +80,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("800x600" ,DRM_MODE_TYPE_DRIVER ,56250 ,800 ,832 ,896 ,1048 ,0 ,600 ,601 ,604 ,631 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 800x600@120Hz RB */ + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 73250, 800, 848, +880 ,960 ,0 ,600 ,603 ,607 ,636 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 848x480@60Hz */ { DRM_MODE("848x480", DRM_MODE_TYPE_DRIVER, 33750, 848, 864, 976, 1088, 0, 480, 486, 494, 517, 0,
@@ -106,10 +109,18 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1024x768" ,DRM_MODE_TYPE_DRIVER ,94500 ,1024 ,1072 ,1168 ,1376 ,0 ,768 ,769 ,772 ,808 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1024x768@120Hz RB */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 115500, 1024, 1072, +1104 ,1184 ,0 ,768 ,771 ,775 ,813 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1152x864@75Hz */ { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,1344 ,1600 ,0 ,864 ,865 ,868 ,900 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1280x768@60Hz RB */ + { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 68250, 1280, 1328, +1360 ,1440 ,0 ,768 ,771 ,778 ,790 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1280x768@60Hz */ { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344, 1472, 1664, 0, 768, 771, 778, 798, 0,
@@ -122,6 +133,14 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1280x768" ,DRM_MODE_TYPE_DRIVER ,117500 ,1280 ,1360 ,1496 ,1712 ,0 ,768 ,771 ,778 ,809 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1280x768@120Hz RB */ + { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 140250, 1280, 1328, +1360 ,1440 ,0 ,768 ,771 ,778 ,813 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 1280x800@60Hz RB */ + { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 71000, 1280, 1328, +1360 ,1440 ,0 ,800 ,803 ,809 ,823 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1280x800@60Hz */ { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352, 1480, 1680, 0, 800, 803, 809, 831, 0,
@@ -134,6 +153,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1280x800" ,DRM_MODE_TYPE_DRIVER ,122500 ,1280 ,1360 ,1496 ,1712 ,0 ,800 ,803 ,809 ,843 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1280x800@120Hz RB */ + { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 146250, 1280, 1328, +1360 ,1440 ,0 ,800 ,803 ,809 ,847 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1280x960@60Hz */ { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376, 1488, 1800, 0, 960, 961, 964, 1000, 0,
@@ -142,6 +165,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1280x960" ,DRM_MODE_TYPE_DRIVER ,148500 ,1280 ,1344 ,1504 ,1728 ,0 ,960 ,961 ,964 ,1011 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1280x960@120Hz RB */ + { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 175500, 1280, 1328, +1360 ,1440 ,0 ,960 ,963 ,967 ,1017 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1280x1024@60Hz */ { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328, 1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
@@ -154,10 +181,22 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1280x1024" ,DRM_MODE_TYPE_DRIVER ,157500 ,1280 ,1344 ,1504 ,1728 ,0 ,1024 ,1025 ,1028 ,1072 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1280x1024@120Hz RB */ + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 187250, 1280, 1328, +1360 ,1440 ,0 ,1024 ,1027 ,1034 ,1084 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1360x768@60Hz */ { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424,1536 ,1792 ,0 ,768 ,771 ,777 ,795 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1360x768@120Hz RB */ + { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 148250, 1360, 1408, +1440 ,1520 ,0 ,768 ,771 ,776 ,813 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 1400x1050@60Hz RB */ + { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 101000, 1400, 1448, +1480 ,1560 ,0 ,1050 ,1053 ,1057 ,1080 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1440x1050@60Hz */ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488, 1632, 1864, 0, 1050, 1053, 1057, 1089, 0,
@@ -170,6 +209,14 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1400x1050" ,DRM_MODE_TYPE_DRIVER ,179500 ,1400 ,1504 ,1656 ,1912 ,0 ,1050 ,1053 ,1057 ,1105 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1400x1050@120Hz RB */ + { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 208000, 1400, 1448, +1480 ,1560 ,0 ,1050 ,1053 ,1057 ,1112 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 1440x900@60Hz RB */ + { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 88750, 1440, 1488, +1520 ,1600 ,0 ,900 ,903 ,909 ,926 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1440x900@60Hz */ { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520, 1672, 1904, 0, 900, 903, 909, 934, 0,
@@ -182,6 +229,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1440x900" ,DRM_MODE_TYPE_DRIVER ,157000 ,1440 ,1544 ,1696 ,1952 ,0 ,900 ,903 ,909 ,948 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1440x900@120Hz RB */ + { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 182750, 1440, 1488, +1520 ,1600 ,0 ,900 ,903 ,909 ,953 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1600x1200@60Hz */ { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664, 1856, 2160, 0, 1200, 1201, 1204, 1250, 0,
@@ -202,6 +253,14 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1600x1200" ,DRM_MODE_TYPE_DRIVER ,229500 ,1600 ,1664 ,1856 ,2160 ,0 ,1200 ,1201 ,1204 ,1250 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1600x1200@120Hz RB */ + { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 268250, 1600, 1648, +1680 ,1760 ,0 ,1200 ,1203 ,1207 ,1271 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 1680x1050@60Hz RB */ + { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 119000, 1680, 1728, +1760 ,1840 ,0 ,1050 ,1053 ,1059 ,1080 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1680x1050@60Hz */ { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784, 1960, 2240, 0, 1050, 1053, 1059, 1089, 0,
@@ -214,6 +273,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1680x1050" ,DRM_MODE_TYPE_DRIVER ,214750 ,1680 ,1808 ,1984 ,2288 ,0 ,1050 ,1053 ,1059 ,1105 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1680x1050@120Hz RB */ + { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 245500, 1680, 1728, +1760 ,1840 ,0 ,1050 ,1053 ,1059 ,1112 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1792x1344@60Hz */ { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920, 2120, 2448, 0, 1344, 1345, 1348, 1394, 0,
@@ -222,6 +285,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1792x1344" ,DRM_MODE_TYPE_DRIVER ,261000 ,1792 ,1888 ,2104 ,2456 ,0 ,1344 ,1345 ,1348 ,1417 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1792x1344@120Hz RB */ + { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 333250, 1792, 1840, +1872 ,1952 ,0 ,1344 ,1347 ,1351 ,1423 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1853x1392@60Hz */ { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952, 2176, 2528, 0, 1392, 1393, 1396, 1439, 0,
@@ -230,6 +297,14 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1856x1392" ,DRM_MODE_TYPE_DRIVER ,288000 ,1856 ,1984 ,2208 ,2560 ,0 ,1392 ,1395 ,1399 ,1500 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1856x1392@120Hz RB */ + { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 356500, 1856, 1904, +1936 ,2016 ,0 ,1392 ,1395 ,1399 ,1474 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 1920x1200@60Hz RB */ + { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 154000, 1920, 1968, +2000 ,2080 ,0 ,1200 ,1203 ,1209 ,1235 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1920x1200@60Hz */ { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056, 2256, 2592, 0, 1200, 1203, 1209, 1245, 0,
@@ -242,6 +317,10 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1920x1200" ,DRM_MODE_TYPE_DRIVER ,281250 ,1920 ,2064 ,2272 ,2624 ,0 ,1200 ,1203 ,1209 ,1262 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1920x1200@120Hz RB */ + { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 317000, 1920, 1968, +2000 ,2080 ,0 ,1200 ,1203 ,1209 ,1271 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 1920x1440@60Hz */ { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048, 2256, 2600, 0, 1440, 1441, 1444, 1500, 0,
@@ -250,6 +329,14 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1920x1440" ,DRM_MODE_TYPE_DRIVER ,297000 ,1920 ,2064 ,2288 ,2640 ,0 ,1440 ,1441 ,1444 ,1500 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 1920x1440@120Hz RB */ + { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 380500, 1920, 1968, +2000 ,2080 ,0 ,1440 ,1443 ,1447 ,1525 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, +/* 2560x1600@60Hz RB */ + { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 268500, 2560, 2608, +2640 ,2720 ,0 ,1600 ,1603 ,1609 ,1646 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) },/* 2560x1600@60Hz */ { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752, 3032, 3504, 0, 1600, 1603, 1609, 1658, 0,
@@ -262,6 +349,11 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("2560x1600" ,DRM_MODE_TYPE_DRIVER ,505250 ,2560 ,2768 ,3048 ,3536 ,0 ,1600 ,1603 ,1609 ,1682 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, +/* 2560x1600@120Hz RB */ + { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 552750, 2560, 2608, +2640 ,2720 ,0 ,1600 ,1603 ,1609 ,1694 ,0 , + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, + };static const int drm_num_dmt_modes =sizeof (drm_dmt_modes) /sizeof (struct drm_display_mode );
Signature · 1 line
1.7.7.6
PATCH 7/12 drm/edid: Fix some comment typos in the DMT mode list
In reply to Adam Jackson--- drivers/gpu/drm/drm_edid_modes.h | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/drm_edid_modes.h +5 -5
@@ -197,15 +197,15 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1400x1050" ,DRM_MODE_TYPE_DRIVER ,101000 ,1400 ,1448 ,1480 ,1560 ,0 ,1050 ,1053 ,1057 ,1080 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, -/* 1440x1050@60Hz */ +/* 1400x1050@60Hz */ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488,1632 ,1864 ,0 ,1050 ,1053 ,1057 ,1089 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, -/* 1440x1050@75Hz */ +/* 1400x1050@75Hz */ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 156000, 1400, 1504,1648 ,1896 ,0 ,1050 ,1053 ,1057 ,1099 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, -/* 1440x1050@85Hz */ +/* 1400x1050@85Hz */ { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 179500, 1400, 1504,1656 ,1912 ,0 ,1050 ,1053 ,1057 ,1105 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
@@ -281,7 +281,7 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1792x1344" ,DRM_MODE_TYPE_DRIVER ,204750 ,1792 ,1920 ,2120 ,2448 ,0 ,1344 ,1345 ,1348 ,1394 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, -/* 1729x1344@75Hz */ +/* 1792x1344@75Hz */ { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 261000, 1792, 1888,2104 ,2456 ,0 ,1344 ,1345 ,1348 ,1417 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
@@ -289,7 +289,7 @@ static const struct drm_display_mode drm_dmt_modes[] = { {DRM_MODE ("1792x1344" ,DRM_MODE_TYPE_DRIVER ,333250 ,1792 ,1840 ,1872 ,1952 ,0 ,1344 ,1347 ,1351 ,1423 ,0 , DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, -/* 1853x1392@60Hz */ +/* 1856x1392@60Hz */ { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952,2176 ,2528 ,0 ,1392 ,1393 ,1396 ,1439 ,0 , DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) },
Signature · 1 line
1.7.7.6
PATCH 8/12 drm/edid: Do drm_dmt_modes_for_range() for all range descriptor types
In reply to Adam JacksonEDID 1.4 retcons the meaning of the "GTF feature" bit to mean "is continuous frequency", and moves the set of supported timing formulas into the range descriptor itself. In any event, the range descriptor can act as a filter on the DMT list without regard to a specific timing formula.
--- drivers/gpu/drm/drm_edid.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-)
drivers/gpu/drm/drm_edid.c +6 -5
@@ -1042,12 +1042,13 @@ do_inferred_modes(struct detailed_timing *timing, void *c) {struct detailed_mode_closure *closure = c;struct detailed_non_pixel *data = &timing->data.other_data; -int gtf = (closure->edid->features &DRM_EDID_FEATURE_DEFAULT_GTF ); -if (gtf && data->type ==EDID_DETAIL_MONITOR_RANGE ) - closure->modes +=drm_dmt_modes_for_range (closure->connector, - closure->edid, - timing); +if (data->type !=EDID_DETAIL_MONITOR_RANGE ) +return ; + + closure->modes +=drm_dmt_modes_for_range (closure->connector, + closure->edid, + timing); } static int
Signature · 1 line
1.7.7.6
PATCH 9/12 drm/edid: Update range descriptor struct for EDID 1.4
In reply to Adam Jackson--- include/drm/drm_edid.h | 26 ++++++++++++++++++++------ 1 files changed, 20 insertions(+), 6 deletions(-)
include/drm/drm_edid.h +20 -6
@@ -90,12 +90,26 @@ struct detailed_data_monitor_range {u8 min_hfreq_khz;u8 max_hfreq_khz;u8 pixel_clock_mhz;/* need to multiply by 10 */ -__le16 sec_gtf_toggle;/* A000=use above, 20=use below */ -u8 hfreq_start_khz;/* need to multiply by 2 */ -u8 c;/* need to divide by 2 */ -__le16 m; -u8 k; -u8 j;/* need to divide by 2 */ +u8 flags; +union { +struct { +u8 reserved; +u8 hfreq_start_khz;/* need to multiply by 2 */ +u8 c;/* need to divide by 2 */ +__le16 m; +u8 k; +u8 j;/* need to divide by 2 */ + } gtf2; +struct { +u8 version; +u8 data1;/* high 6 bits: extra clock resolution */ +u8 data2;/* plus low 2 of above: max hactive */ +u8 supported_aspects; +u8 flags;/* preferred aspect and blanking support */ +u8 supported_scalings; +u8 preferred_refresh; + } cvt; + } formula; } __attribute__((packed));struct detailed_data_wpindex {
Signature · 1 line
1.7.7.6
Re: [Intel-gfx] [PATCH 09/12] drm/edid: Update range descriptor struct for EDID 1.4
At Fri, 13 Apr 2012 16:33:37 -0400,
Quoted 29 lines · Adam Jackson
Signed-off-by Adam Jackson <[email protected]>--- include/drm/drm_edid.h | 26 ++++++++++++++++++++------ 1 files changed, 20 insertions(+), 6 deletions(-)include/drm/drm_edid.h +9
-6@@ -90,12 +90,26 @@ struct detailed_data_monitor_range {u8 min_hfreq_khz;u8 max_hfreq_khz;u8 pixel_clock_mhz;/* need to multiply by 10 */ -__le16 sec_gtf_toggle;/* A000=use above, 20=use below */ -u8 hfreq_start_khz;/* need to multiply by 2 */ -u8 c;/* need to divide by 2 */ -__le16 m; -u8 k; -u8 j;/* need to divide by 2 */ +u8 flags; +union { +struct { +u8 reserved; +u8 hfreq_start_khz;/* need to multiply by 2 */ +u8 c;/* need to divide by 2 */ +__le16 m; +u8 k; +u8 j;/* need to divide by 2 */
include/drm/drm_edid.h struct detailed_data_monitor_range { · line 111
Quoted 10 lines
include/drm/drm_edid.h +10
-0+ } gtf2; +struct { +u8 version; +u8 data1;/* high 6 bits: extra clock resolution */ +u8 data2;/* plus low 2 of above: max hactive */ +u8 supported_aspects; +u8 flags;/* preferred aspect and blanking support */ +u8 supported_scalings; +u8 preferred_refresh; + } cvt;
These new structs must be marked with __attribute__((packed)) although the struct detailed_data_monitor_range itself is already marked. At least, with gcc 4.6 and x86-64 here, they get unaligned.
thanks,
Takashi
Quoted 12 lines
include/drm/drm_edid.h +1
-0+ } formula; } __attribute__((packed));struct detailed_data_wpindex {Signature · 6 lines
1.7.7.6 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 09/12] drm/edid: Update range descriptor struct for EDID 1.4
Quoted 16 lines · Takashi Iwai
Quoted 15 lines · Adam Jackson
include/drm/drm_edid.h +15
-0+u8 flags; +union { +struct { +u8 reserved; +u8 hfreq_start_khz;/* need to multiply by 2 */ +u8 c;/* need to divide by 2 */ +__le16 m; +u8 k; +u8 j;/* need to divide by 2 */ + } gtf2; +struct { +u8 version; +u8 data1;/* high 6 bits: extra clock resolution */ +u8 data2;/* plus low 2 of above: max hactive */ +u8 supported_aspects;
Quoted 8 lines
include/drm/drm_edid.h struct detailed_data_monitor_range { · line 111
Quoted 4 lines
include/drm/drm_edid.h +4
-0+u8 flags;/* preferred aspect and blanking support */ +u8 supported_scalings; +u8 preferred_refresh; + } cvt;These new structs must be marked with __attribute__((packed)) although the struct
detailed_data_monitor_rangeitself is already marked. At least, with gcc 4.6 and x86-64 here, they get unaligned.
Eek. Good catch, thanks.
- ajax
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 10/12 drm/edid: Give the est3 mode struct a real name
In reply to Adam JacksonWe want the same type for extra modes inferred from ranges.
--- drivers/gpu/drm/drm_edid_modes.h | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_edid_modes.h +4 -2
@@ -412,12 +412,14 @@ static const struct drm_display_mode edid_est_modes[] = { DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */ }; -static const struct { +struct minimode {short w;short h;short r;short rb; -} est3_modes[] = { +}; + +static const struct minimode est3_modes[] = {/* byte 6 */ {640 ,350 ,85 ,0 }, {640 ,400 ,85 ,0 },
Signature · 1 line
1.7.7.6
PATCH 11/12 drm/edid: Add extra_modes
In reply to Adam JacksonSome common sizes that don't show up in DMT.
--- drivers/gpu/drm/drm_edid_modes.h | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)
drivers/gpu/drm/drm_edid_modes.h +11 -0
@@ -473,6 +473,17 @@ static const struct minimode est3_modes[] = { };static const int num_est3_modes =sizeof (est3_modes) /sizeof (est3_modes[0 ]); +static const struct minimode extra_modes[] = { + {1024 ,576 ,60 ,0 }, + {1366 ,768 ,60 ,0 }, + {1600 ,900 ,60 ,0 }, + {1680 ,945 ,60 ,0 }, + {1920 ,1080 ,60 ,0 }, + {2048 ,1152 ,60 ,0 }, + {2048 ,1536 ,60 ,0 }, +}; +static const int num_extra_modes =sizeof (extra_modes) /sizeof (extra_modes[0 ]); +/* * Probably taken from CEA-861 spec. * This table is converted from xorg's hw/xfree86/modes/xf86EdidModes.c.
Signature · 1 line
1.7.7.6
PATCH 12/12 drm/edid: Generate modes from extra_modes for range descriptors
In reply to Adam Jackson--- drivers/gpu/drm/drm_edid.c | 73 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 73 insertions(+), 0 deletions(-)
drivers/gpu/drm/drm_edid.c +73 -0
@@ -1037,11 +1037,61 @@ drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,return modes; } +static int +drm_gtf_modes_for_range (struct drm_connector *connector,struct edid *edid, +struct detailed_timing *timing) +{ +int i, modes =0 ; +struct drm_display_mode *newmode; +struct drm_device *dev = connector->dev; + +for (i =0 ; i < num_extra_modes; i++) { +const struct minimode *m = &extra_modes[i]; + newmode =drm_gtf_mode (dev, m->w, m->h, m->r,0 ,0 ); + +if (!mode_in_range (newmode, edid, timing)) { +drm_mode_destroy (dev, newmode); +continue ; + } + +drm_mode_probed_add (connector, newmode); + modes++; + } + +return modes; +} + +static int +drm_cvt_modes_for_range (struct drm_connector *connector,struct edid *edid, +struct detailed_timing *timing) +{ +int i, modes =0 ; +struct drm_display_mode *newmode; +struct drm_device *dev = connector->dev; +bool rb =drm_monitor_supports_rb (edid); + +for (i =0 ; i < num_extra_modes; i++) { +const struct minimode *m = &extra_modes[i]; + newmode =drm_cvt_mode (dev, m->w, m->h, m->r, rb,0 ,0 ); + +if (!mode_in_range (newmode, edid, timing)) { +drm_mode_destroy (dev, newmode); +continue ; + } + +drm_mode_probed_add (connector, newmode); + modes++; + } + +return modes; +} +static void do_inferred_modes (struct detailed_timing *timing,void *c) {struct detailed_mode_closure *closure = c;struct detailed_non_pixel *data = &timing->data.other_data; +struct detailed_data_monitor_range *range = &data->data.range;if (data->type !=EDID_DETAIL_MONITOR_RANGE )return ;
@@ -1049,6 +1099,29 @@ do_inferred_modes(struct detailed_timing *timing, void *c) closure->modes +=drm_dmt_modes_for_range (closure->connector, closure->edid, timing); + +if (!version_greater (closure->edid,1 ,1 )) +return ;/* GTF not defined yet */ + +switch (range->flags) { +case 0x02 :/* secondary gtf, XXX could do more */ +case 0x00 :/* default gtf */ + closure->modes +=drm_gtf_modes_for_range (closure->connector, + closure->edid, + timing); +break ; +case 0x04 :/* cvt, only in 1.4+ */ +if (!version_greater (closure->edid,1 ,3 )) +break ; + + closure->modes +=drm_cvt_modes_for_range (closure->connector, + closure->edid, + timing); +break ; +case 0x01 :/* just the ranges, no formula */ +default : +break ; + } } static int
Signature · 1 line
1.7.7.6
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modes
Quoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
- ajax
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 15 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
Quoted 5 lines
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Sounds like a good compromise. We have already hacks in drm_edid.c for HDMI TV, so one exception more isn't that bad ;)
Takashi
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 18 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 15 lines · Adam Jackson
Quoted 12 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesThis still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
Quoted 8 lines
Quoted 5 lines
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)
FYI, I tried the hack below and it seems working.
Takashi
---
--- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/gpu/drm/drm_edid.c +15 -0
@@ -1047,6 +1047,19 @@ drm_dmt_modes_for_range(struct drm_connereturn modes; } +/* fix up 1366x768 mode from 1368x768; +* GTF/CVT can't express 1366 width which isn't dividable by 8 +*/ +static void fixup_mode_1366x768 (struct drm_display_mode *mode) +{ +if (mode->hdisplay ==1368 && mode->vdisplay ==768 ) { + mode->hdisplay =1366 ; + mode->hsync_start--; + mode->hsync_end--; +drm_mode_set_name (mode); + } +} +static int drm_gtf_modes_for_range (struct drm_connector *connector,struct edid *edid,struct detailed_timing *timing)
@@ -1059,6 +1072,7 @@ drm_gtf_modes_for_range(struct drm_conneconst struct minimode *m = &extra_modes[i]; newmode =drm_gtf_mode (dev, m->w, m->h, m->r,0 ,0 ); +fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {drm_mode_destroy (dev, newmode);continue ;
@@ -1084,6 +1098,7 @@ drm_cvt_modes_for_range(struct drm_conneconst struct minimode *m = &extra_modes[i]; newmode =drm_cvt_mode (dev, m->w, m->h, m->r, rb,0 ,0 ); +fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {drm_mode_destroy (dev, newmode);continue ;
At Thu, 19 Apr 2012 14:03:58 +0200,
Quoted 27 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 24 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 20 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Quoted 4 lines
Quoted 2 lines
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)FYI, I tried the hack below and it seems working.
In addition, there are some missing NULL checks...
Takashi
---
--- drivers/gpu/drm/drm_edid.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_edid.c +6 -0
@@ -789,6 +789,8 @@ drm_mode_std(struct drm_connector *conne* secondary GTF curve. Please don't do that. */ mode =drm_gtf_mode (dev, hsize, vsize, vrefresh_rate,0 ,0 ); +if (!mode) +return NULL ;if (drm_mode_hsync (mode) >drm_gtf2_hbreak (edid)) {kfree (mode); mode = drm_gtf_mode_complex(dev, hsize, vsize,
@@ -1071,6 +1073,8 @@ drm_gtf_modes_for_range(struct drm_connefor (i =0 ; i < num_extra_modes; i++) {const struct minimode *m = &extra_modes[i]; newmode =drm_gtf_mode (dev, m->w, m->h, m->r,0 ,0 ); +if (!newmode) +return modes;fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {
@@ -1097,6 +1101,8 @@ drm_cvt_modes_for_range(struct drm_connefor (i =0 ; i < num_extra_modes; i++) {const struct minimode *m = &extra_modes[i]; newmode =drm_cvt_mode (dev, m->w, m->h, m->r, rb,0 ,0 ); +if (!newmode) +return modes;fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {
Dave Airlie
maintainerQuoted 31 lines · Takashi Iwai
At Thu, 19 Apr 2012 14:03:58 +0200,
Quoted 29 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 26 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 15 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
Quoted 5 lines
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)
I've pulled the series into -next along with the NULL check fix.
the only outstanding bit is the hack.
Thanks,
Dave.
At Fri, 20 Apr 2012 13:05:48 +0100,
Quoted 31 lines · Dave Airlie
Quoted 29 lines · Takashi Iwai
At Thu, 19 Apr 2012 14:03:58 +0200,
Quoted 27 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 24 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 20 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Quoted 4 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)I've pulled the series into -next along with the NULL check fix.
Thanks!
Quoted 1 line
the only outstanding bit is the hack.
Also the packed attributes are missing in the new structs. The fix patch is below.
Takashi
---
From: Takashi Iwai <[email protected]>
Subject: [PATCH 2/2] drm/edid: Add packed attribute to new gtf2 and cvt structs
The new structs added in struct detailed_data_monitor_range must be marked with packed attribute although the outer struct itself is already marked as packed. Otherwise these 7-bytes structs may be aligned, and give the wrong position and size for the data.
--- include/drm/drm_edid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/drm/drm_edid.h +2 -2
@@ -99,7 +99,7 @@ struct detailed_data_monitor_range {__le16 m;u8 k;u8 j;/* need to divide by 2 */ - } gtf2; + } __attribute__((packed)) gtf2;struct {u8 version;u8 data1;/* high 6 bits: extra clock resolution */
@@ -108,7 +108,7 @@ struct detailed_data_monitor_range {u8 flags;/* preferred aspect and blanking support */ u8 supported_scalings;u8 preferred_refresh; - } cvt; + } __attribute__((packed)) cvt; } formula; } __attribute__((packed));
Signature · 6 lines
1.7.9.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Dave Airlie
maintainerQuoted 26 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 24 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 20 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Quoted 5 lines
Quoted 2 lines
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)FYI, I tried the hack below and it seems working.
Is this hack going to be a real patch? ajax care to review?
Dave.
At Fri, 20 Apr 2012 13:04:42 +0100,
Quoted 28 lines · Dave Airlie
Quoted 26 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:26:26 +0200,
Quoted 24 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:56:26 -0400,
Quoted 20 lines · Adam Jackson
Quoted 8 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
One minor buglet in this series that's not obvious from inspection (and that I didn't realize until just now) is that putting 1366x768 in the minimode list won't do what you want, since the mode you get back will be 1368x768. Probably we should move the manual-underscan hack into the timing generators themselves.
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
Sounds like a good compromise. We have already hacks in
drm_edid.cfor HDMI TV, so one exception more isn't that bad ;)FYI, I tried the hack below and it seems working.
Is this hack going to be a real patch? ajax care to review?
For the easiness, below is the patch with my sign-off.
thanks,
Takashi
---
From: Takashi Iwai <[email protected]>
Subject: [PATCH 1/2] drm/edid: Add a workaround for 1366x768 HD panel
HD panel (1366x768) found most commonly on laptops can't be represented exactly in CVT/DMT expression, which leads to 1368x768 instead, because 1366 can't be divided by 8.
Add a hack to convert to 1366x768 manually as an exception.
--- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/gpu/drm/drm_edid.c +15 -0
@@ -1039,6 +1039,19 @@ drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,return modes; } +/* fix up 1366x768 mode from 1368x768; +* GFT/CVT can't express 1366 width which isn't dividable by 8 +*/ +static void fixup_mode_1366x768 (struct drm_display_mode *mode) +{ +if (mode->hdisplay ==1368 && mode->vdisplay ==768 ) { + mode->hdisplay =1366 ; + mode->hsync_start--; + mode->hsync_end--; +drm_mode_set_name (mode); + } +} +static int drm_gtf_modes_for_range (struct drm_connector *connector,struct edid *edid,struct detailed_timing *timing)
@@ -1053,6 +1066,7 @@ drm_gtf_modes_for_range(struct drm_connector *connector, struct edid *edid,if (!newmode)return modes; +fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {drm_mode_destroy (dev, newmode);continue ;
@@ -1080,6 +1094,7 @@ drm_cvt_modes_for_range(struct drm_connector *connector, struct edid *edid,if (!newmode)return modes; +fixup_mode_1366x768 (newmode);if (!mode_in_range (newmode, edid, timing)) {drm_mode_destroy (dev, newmode);continue ;
Signature · 6 lines
1.7.9.2 _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
At Fri, 13 Apr 2012 16:33:28 -0400,
Quoted 9 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modes
Quoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
I tried these patches now with a few monitors here and it looks working well (after fixing the alignment as I posted in another mail). I got new 1600x900 output on two monitors. Yay!
I guess this will solve major of problems we've face for HD+ panel. The rest is the 1366x768 mode, but it's often covered by 1360x768. So, once when LVDS gets additional de facto standard modes, it'll be fixed as well.
thanks,
Takashi
Takashi Iwai
Tested-byAt Tue, 17 Apr 2012 17:33:17 +0200,
Quoted 12 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:33:28 -0400,
Quoted 9 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modes
Quoted 8 lines
Quoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
I tried these patches now with a few monitors here and it looks working well (after fixing the alignment as I posted in another mail). I got new 1600x900 output on two monitors. Yay!
Oh, feel free to add my tested-by tag:
thanks,
Takashi
Rodrigo Vivi
Reviewed-byThanks for the patches ajax
Feel free to use
Quoted 35 lines · Takashi Iwai
At Tue, 17 Apr 2012 17:33:17 +0200,
Quoted 12 lines · Takashi Iwai
At Fri, 13 Apr 2012 16:33:28 -0400,
Quoted 9 lines · Adam Jackson
Incorporates some feedback from Rodrigo and Takashi. Major themes of the series:
- Fix the DMT list to include reduced-blanking modes
- Add modes from DMT for any range descriptor type
- Add an extra modes list for things not in DMT
- For ranges that specify a formula, generate timings from the extra modesQuoted 8 lines
Quoted 4 lines
This still doesn't address the driver policy decision of "I know I have a scaler, add modes as if there were a range descriptor even if there's not one". But it should at least make clear what such a helper function should do.
I tried these patches now with a few monitors here and it looks working well (after fixing the alignment as I posted in another mail). I got new 1600x900 output on two monitors. Yay!
Oh, feel free to add my tested-by tag:
Tested-by Takashi Iwai <[email protected]>thanks,
Takashi
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 3 lines
Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net