Can not boot with USB
Hello,
I want to use the sdk image booting with usb flash disk,but the
board can not boot ... While I use other image without sdk the board can boot.Anybody can help me?
detail?
Quoted 8 lines · On Sun, 2012-04-15 at 11:51 +0800, "沈华明@qq" wrote:
Hello,
I want to use the sdk image booting with usb flash disk,but the
board can not boot ... While I use other image without sdk the board can boot.Anybody can help me?
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 3 lines
Yi Qingliang [email protected] https://niqingliang2003.wordpress.com
Hi,
The image size of the sato-sdk image can exceeds 1GB. In this case, due to an old bug(https://bugzilla.yoctoproject.org/show_bug.cgi?id=2138, that has been fixed in the latest poky master's code) , directly doing dd the image into a USB disk can't make a bootable USB disk(it shows "No DEFAULT or UI configuration directive found").
Please try the latest poky master's code.
Or, we can use another way to cope with the issue: please use the method mkdiskimage/mkdir/mount/cp/umount/syslinux mentioned in the below page http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/README.hardware
Thanks,
-- Dexuan
Quoted 15 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of "沈华明@qq"
Sent: Sunday, April 15, 2012 11:52 AM
To: [email protected]
Subject: [yocto] Can not boot with USBHello,
I want to use the sdk image booting with usb flash disk,but the
board can not boot ... While I use other image without sdk the board can boot.Anybody can help me?
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto