NM10 chipset with GMA3600
Hello everyone,
I'm writing to this list, hoping not to be in the wrong place. The subject is a GMA 3600 graphic controller which I have on a D2500CC Mini-ITX Intel board. My operating system is Debian Wheezy with latest stable 3.3.4 kernel (GMA3600 option compiled in).
According to Intel's positive reputation for supporting open source drivers, I admit I didn't do a thorough research on this specific chipset *before* buying the mainboard (and that's my fault). Only later, being stuck to a Vesa driver with wrong screen ratio and resolution, I discovered that GMA3600 isn't supported (yet).
My question is: will it ever be, as GMA3150 is? Or I'd better switch to an H67 chipset with HD controller?
Many, many thanks.
Best regards,
Andrew
Quoted 4 lines · On 2012.05.03 12:16:26 +0000, [email protected] wrote:
Hello everyone,
I'm writing to this list, hoping not to be in the wrong place. The subject is a GMA 3600 graphic controller which I have on a D2500CC Mini-ITX Intel board. My operating system is Debian Wheezy with latest stable 3.3.4 kernel (GMA3600 option compiled in).
You might send kernel log to Alan, and describe what's your display configuration, upstream kernel should have basic display support.
Or maybe I guess your board might have unsupported pci ids, cedarview has so many variants.
Signature · 3 lines
Open Source Technology Center, Intel ltd. $gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx