Skip to contentSkip to conversation

3.0.31-stable review

PATCH In review Greg KH 2 participants 50 messages May 4, 2012 – May 8, 2012

Subsystems (34)
lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

cover 3.0.31-stable review

This is the start of the stable review cycle for the 3.0.31 release. There are 47 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun May 6 20:42:43 UTC 2012. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.31-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------

 Makefile                                      |    4 +-
 arch/arm/include/asm/tls.h                    |    4 +
 arch/x86/kernel/apic/apic.c                   |   34 ++--
 arch/x86/xen/smp.c                            |   15 ++
 arch/x86/xen/xen-asm.S                        |    2 +-
 drivers/ata/libata-eh.c                       |    3 +-
 drivers/dma/at_hdmac.c                        |    4 -
 drivers/firmware/efivars.c                    |  222 +++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_gem_execbuffer.c    |    8 +-
 drivers/gpu/drm/i915/intel_sdvo.c             |   34 ++--
 drivers/hwmon/coretemp.c                      |    6 +-
 drivers/hwmon/fam15h_power.c                  |   42 +++++
 drivers/i2c/busses/i2c-pnx.c                  |    3 +-
 drivers/mmc/host/sdhci-esdhc-imx.c            |    3 +-
 drivers/net/wireless/ipw2x00/ipw2200.c        |   13 +-
 drivers/net/wireless/rtlwifi/pci.c            |    1 +
 drivers/net/wireless/wl1251/main.c            |    1 +
 drivers/net/wireless/wl1251/sdio.c            |    2 +-
 drivers/scsi/libsas/sas_expander.c            |   26 ++-
 drivers/staging/brcm80211/brcmsmac/wlc_bmac.c |    3 +-
 drivers/staging/brcm80211/brcmsmac/wlc_bmac.h |    1 +
 drivers/staging/brcm80211/brcmsmac/wlc_main.c |    8 +
 drivers/usb/class/cdc-wdm.c                   |    7 +-
 drivers/usb/core/hcd-pci.c                    |    9 +
 drivers/usb/gadget/f_mass_storage.c           |    2 +-
 drivers/usb/gadget/file_storage.c             |    2 +-
 drivers/usb/gadget/uvc.h                      |    2 +-
 drivers/usb/gadget/uvc_v4l2.c                 |    2 +-
 drivers/usb/host/ehci-hcd.c                   |    2 +-
 drivers/usb/host/ehci-pci.c                   |    8 +
 drivers/usb/host/fsl-mph-dr-of.c              |    1 +
 fs/autofs4/autofs_i.h                         |   12 +-
 fs/autofs4/dev-ioctl.c                        |    3 +-
 fs/autofs4/inode.c                            |    4 +-
 fs/autofs4/waitq.c                            |   20 +--
 fs/nfs/nfs4proc.c                             |   23 ++-
 fs/nfs/super.c                                |    8 +-
 fs/nfsd/nfs4proc.c                            |    7 +-
 fs/nfsd/nfs4state.c                           |   23 +--
 fs/pipe.c                                     |   31 +++-
 include/linux/efi.h                           |   13 +-
 include/linux/kvm_host.h                      |    6 +
 include/linux/pipe_fs_i.h                     |    1 +
 include/linux/usb/hcd.h                       |    2 +
 kernel/sched.c                                |   53 +++---
 net/mac80211/tx.c                             |    3 +-
 net/wireless/nl80211.c                        |   29 ++--
 scripts/mod/file2alias.c                      |    4 +
 sound/soc/soc-dapm.c                          |    2 +
 virt/kvm/iommu.c                              |   12 +-
 virt/kvm/kvm_main.c                           |    5 +-
 51 files changed, 570 insertions(+), 165 deletions(-)
author maintainer
#1 lore raw

PATCH 1/47 nfs: Enclose hostname in brackets when needed in nfs_do_root_mount

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit 98a2139f4f4d7b5fcc3a54c7fddbe88612abed20 upstream.

When hostname contains colon (e.g. when it is an IPv6 address) it needs to be enclosed in brackets to make parsing of NFS device string possible. Fix nfs_do_root_mount() to enclose hostname properly when needed. NFS code actually does not need this as it does not parse the string passed by nfs_do_root_mount() but the device string is exposed to userspace in /proc/mounts.

---
 fs/nfs/super.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/nfs/super.c +6 -2
@@ -2694,11 +2694,15 @@ static struct vfsmount *nfs_do_root_moun
 	char *root_devname;
 	size_t len;
 
-	len = strlen(hostname) + 3;
+	len = strlen(hostname) + 5;
 	root_devname = kmalloc(len, GFP_KERNEL);
 	if (root_devname == NULL)
 		return ERR_PTR(-ENOMEM);
-	snprintf(root_devname, len, "%s:/", hostname);
+	/* Does hostname needs to be enclosed in brackets? */
+	if (strchr(hostname, ':'))
+		snprintf(root_devname, len, "[%s]:/", hostname);
+	else
+		snprintf(root_devname, len, "%s:/", hostname);
 	root_mnt = vfs_kern_mount(fs_type, flags, root_devname, data);
 	kfree(root_devname);
 	return root_mnt;
author maintainer
#2 lore raw

PATCH 2/47 NFSv4: Ensure that the LOCK code sets exception->inode

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 05ffe24f5290dc095f98fbaf84afe51ef404ccc5 upstream.

All callers of nfs4_handle_exception() that need to handle NFS4ERR_OPENMODE correctly should set exception->inode

---
 fs/nfs/nfs4proc.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
fs/nfs/nfs4proc.c +7 -2
@@ -4424,7 +4424,9 @@ static int _nfs4_do_setlk(struct nfs4_st
 static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request)
 {
 	struct nfs_server *server = NFS_SERVER(state->inode);
-	struct nfs4_exception exception = { };
+	struct nfs4_exception exception = {
+		.inode = state->inode,
+	};
 	int err;
 
 	do {
@@ -4442,7 +4444,9 @@ static int nfs4_lock_reclaim(struct nfs4
 static int nfs4_lock_expired(struct nfs4_state *state, struct file_lock *request)
 {
 	struct nfs_server *server = NFS_SERVER(state->inode);
-	struct nfs4_exception exception = { };
+	struct nfs4_exception exception = {
+		.inode = state->inode,
+	};
 	int err;
 
 	err = nfs4_set_lock_state(state, request);
@@ -4508,6 +4512,7 @@ static int nfs4_proc_setlk(struct nfs4_s
 {
 	struct nfs4_exception exception = {
 		.state = state,
+		.inode = state->inode,
 	};
 	int err;
 
author maintainer
#3 lore raw

PATCH 3/47 NFSv4: Ensure that we check lock exclusive/shared type against open modes

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 55725513b5ef9d462aa3e18527658a0362aaae83 upstream.

Since we may be simulating flock() locks using NFS byte range locks, we can't rely on the VFS having checked the file open mode for us.

---
 fs/nfs/nfs4proc.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
fs/nfs/nfs4proc.c +14 -0
@@ -4558,6 +4558,20 @@ nfs4_proc_lock(struct file *filp, int cm
 
 	if (state == NULL)
 		return -ENOLCK;
+	/*
+	 * Don't rely on the VFS having checked the file open mode,
+	 * since it won't do this for flock() locks.
+	 */
+	switch (request->fl_type & (F_RDLCK|F_WRLCK|F_UNLCK)) {
+	case F_RDLCK:
+		if (!(filp->f_mode & FMODE_READ))
+			return -EBADF;
+		break;
+	case F_WRLCK:
+		if (!(filp->f_mode & FMODE_WRITE))
+			return -EBADF;
+	}
+
 	do {
 		status = nfs4_proc_setlk(state, cmd, request);
 		if ((status != -EAGAIN) || IS_SETLK(cmd))
author maintainer
#4 lore raw

PATCH 4/47 x86, apic: APIC code touches invalid MSR on P5 class machines

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <[email protected]>

commit cbf2829b61c136edcba302a5e1b6b40e97d32c00 upstream.

Current APIC code assumes MSR_IA32_APICBASE is present for all systems. Pentium Classic P5 and friends didn't have this MSR. MSR_IA32_APICBASE was introduced as an architectural MSR by Intel @ P6.

Code paths that can touch this MSR invalidly are when vendor == Intel && cpu-family == 5 and APIC bit is set in CPUID - or when you simply pass lapic on the kernel command line, on a P5.

The below patch stops Linux incorrectly interfering with the MSR_IA32_APICBASE for P5 class machines. Other code paths exist that touch the MSR - however those paths are not currently reachable for a conformant P5.

---
 arch/x86/kernel/apic/apic.c |   34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)
arch/x86/kernel/apic/apic.c +20 -14
@@ -1558,9 +1558,11 @@ static int __init apic_verify(void)
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (l & MSR_IA32_APICBASE_ENABLE)
+			mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	}
 
 	pr_info("Found and enabled local APIC!\n");
 	return 0;
@@ -1578,13 +1580,15 @@ int __init apic_force_enable(unsigned lo
 	 * MSR. This can only be done in software for Intel P6 or later
 	 * and AMD K7 (Model > 1) or later.
 	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-		enabled_via_apicbase = 1;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
 	}
 	return apic_verify();
 }
@@ -2112,10 +2116,12 @@ static void lapic_resume(void)
 		 * FIXME! This will be wrong if we ever support suspend on
 		 * SMP! We'll need to do this as part of the CPU restore!
 		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
+		if (boot_cpu_data.x86 >= 6) {
+			rdmsr(MSR_IA32_APICBASE, l, h);
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+		}
 	}
 
 	maxlvt = lapic_get_maxlvt();
author maintainer
#5 lore raw

PATCH 5/47 Revert "autofs: work around unhappy compat problem on x86-64"

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <[email protected]>

commit fcbf94b9dedd2ce08e798a99aafc94fec8668161 upstream.

This reverts commit a32744d4abae24572eff7269bc17895c41bd0085.

While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem.

Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode.

But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel.

There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet.

That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd.

---
 fs/autofs4/autofs_i.h  |    1 -
 fs/autofs4/dev-ioctl.c |    1 -
 fs/autofs4/inode.c     |    2 --
 fs/autofs4/waitq.c     |   20 ++------------------
 4 files changed, 2 insertions(+), 22 deletions(-)
fs/autofs4/autofs_i.h +0 -1
@@ -120,7 +120,6 @@ struct autofs_sb_info {
 	int sub_version;
 	int min_proto;
 	int max_proto;
-	int compat_daemon;
 	unsigned long exp_timeout;
 	unsigned int type;
 	int reghost_enabled;
fs/autofs4/dev-ioctl.c +0 -1
@@ -385,7 +385,6 @@ static int autofs_dev_ioctl_setpipefd(st
 		sbi->pipefd = pipefd;
 		sbi->pipe = pipe;
 		sbi->catatonic = 0;
-		sbi->compat_daemon = is_compat_task();
 	}
 out:
 	mutex_unlock(&sbi->wq_mutex);
fs/autofs4/inode.c +0 -2
@@ -19,7 +19,6 @@
 #include <linux/parser.h>
 #include <linux/bitops.h>
 #include <linux/magic.h>
-#include <linux/compat.h>
 #include "autofs_i.h"
 #include <linux/module.h>
 
@@ -225,7 +224,6 @@ int autofs4_fill_super(struct super_bloc
 	set_autofs_type_indirect(&sbi->type);
 	sbi->min_proto = 0;
 	sbi->max_proto = 0;
-	sbi->compat_daemon = is_compat_task();
 	mutex_init(&sbi->wq_mutex);
 	spin_lock_init(&sbi->fs_lock);
 	sbi->queues = NULL;
fs/autofs4/waitq.c +2 -18
@@ -91,23 +91,6 @@ static int autofs4_write(struct file *fi
 	return (bytes > 0);
 }
 
-/*
- * The autofs_v5 packet was misdesigned.
- *
- * The packets are identical on x86-32 and x86-64, but have different
- * alignment. Which means that 'sizeof()' will give different results.
- * Fix it up for the case of running 32-bit user mode on a 64-bit kernel.
- */
-static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi)
-{
-	size_t pktsz = sizeof(struct autofs_v5_packet);
-#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT)
-	if (sbi->compat_daemon > 0)
-		pktsz -= 4;
-#endif
-	return pktsz;
-}
-
 static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 				 struct autofs_wait_queue *wq,
 				 int type)
@@ -164,7 +147,8 @@ static void autofs4_notify_daemon(struct
 	{
 		struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet;
 
-		pktsz = autofs_v5_packet_size(sbi);
+		pktsz = sizeof(*packet);
+
 		packet->wait_queue_token = wq->wait_queue_token;
 		packet->len = wq->name.len;
 		memcpy(packet->name, wq->name.name, wq->name.len);
author maintainer
#6 lore raw

PATCH 6/47 xen: correctly check for pending events when restoring irq flags

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Vrabel <[email protected]>

commit 7eb7ce4d2e8991aff4ecb71a81949a907ca755ac upstream.

In xen_restore_fl_direct(), xen_force_evtchn_callback() was being called even if no events were pending. This resulted in (depending on workload) about a 100 times as many xen_version hypercalls as necessary.

Fix this by correcting the sense of the conditional jump.

This seems to give a significant performance benefit for some workloads.

There is some subtle tricksy "..since the check here is trying to check both pending and masked in a single cmpw, but I think this is correct. It will call check_events now only when the combined mask+pending word is 0x0001 (aka unmasked, pending)." (Ian)

---
 arch/x86/xen/xen-asm.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/xen/xen-asm.S +1 -1
@@ -96,7 +96,7 @@ ENTRY(xen_restore_fl_direct)
 
 	/* check for unmasked and pending */
 	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
+	jnz 1f
 2:	call check_events
 1:
 ENDPATCH(xen_restore_fl_direct)
author maintainer
#7 lore raw

PATCH 7/47 xen/smp: Fix crash when booting with ACPI hotplug CPUs.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <[email protected]>

commit cf405ae612b0f7e2358db7ff594c0e94846137aa upstream.

When we boot on a machine that can hotplug CPUs and we are using 'dom0_max_vcpus=X' on the Xen hypervisor line to clip the amount of CPUs available to the initial domain, we get this:

(XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all .. snip..
DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011
.. snip.
SMP: Allowing 64 CPUs, 32 hotplug CPUs
installing Xen timer for CPU 7
cpu 7 spinlock event irq 361
NMI watchdog: disabled (cpu7): hardware events not enabled
Brought up 8 CPUs
.. snip..
[acpi processor finds the CPUs are not initialized and starts calling
arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online]
CPU 8 got hotplugged
CPU 9 got hotplugged
CPU 10 got hotplugged
.. snip..
initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs
calling erst_init+0x0/0x2bb @ 1

[and the scheduler sticks newly started tasks on the new CPUs, but said CPUs cannot be initialized b/c the hypervisor has limited the amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag. The spinlock tries to kick the other CPU, but the structure for that is not initialized and we crash.]

BUG: unable to handle kernel paging request at fffffffffffffed8
IP: [<ffffffff81035289>] xen_spin_lock+0x29/0x60
PGD 180d067 PUD 180e067 PMD 0
Oops: 0002 [#1] SMP
CPU 7
Modules linked in:

Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc2upstream-00001-gf5154e8 #1 Intel Corporation S2600CP/S2600CP

RIP: e030:[<ffffffff81035289>]  [<ffffffff81035289>] xen_spin_lock+0x29/0x60
RSP: e02b:ffff8801fb9b3a70  EFLAGS: 00010282

With this patch, we cap the amount of vCPUS that the initial domain can run, to exactly what dom0_max_vcpus=X has specified.

In the future, if there is a hypercall that will allow a running domain to expand past its initial set of vCPUS, this patch should be re-evaluated.

---
 arch/x86/xen/smp.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/x86/xen/smp.c +15 -0
@@ -172,6 +172,7 @@ static void __init xen_fill_possible_map
 static void __init xen_filter_cpu_maps(void)
 {
 	int i, rc;
+	unsigned int subtract = 0;
 
 	if (!xen_initial_domain())
 		return;
@@ -186,8 +187,22 @@ static void __init xen_filter_cpu_maps(v
 		} else {
 			set_cpu_possible(i, false);
 			set_cpu_present(i, false);
+			subtract++;
 		}
 	}
+#ifdef CONFIG_HOTPLUG_CPU
+	/* This is akin to using 'nr_cpus' on the Linux command line.
+	 * Which is OK as when we use 'dom0_max_vcpus=X' we can only
+	 * have up to X, while nr_cpu_ids is greater than X. This
+	 * normally is not a problem, except when CPU hotplugging
+	 * is involved and then there might be more than X CPUs
+	 * in the guest - which will not work as there is no
+	 * hypercall to expand the max number of VCPUs an already
+	 * running guest has. So cap it up to X. */
+	if (subtract)
+		nr_cpu_ids = nr_cpu_ids - subtract;
+#endif
+
 }
 
 static void __init xen_smp_prepare_boot_cpu(void)
author maintainer
#8 lore raw

PATCH 8/47 ASoC: dapm: Ensure power gets managed for line widgets

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Brown <[email protected]>

commit 7e1f7c8a6e517900cd84da1b8ae020f08f286c3b upstream.

Line widgets had not been included in either the power up or power down sequences so if a widget had an event associated with it that event would never be run. Fix this minimally by adding them to the sequences, we should probably be doing away with the specific widget types as they all have the same priority anyway.

---
 sound/soc/soc-dapm.c |    2 ++
 1 file changed, 2 insertions(+)
sound/soc/soc-dapm.c +2 -0
@@ -67,6 +67,7 @@ static int dapm_up_seq[] = {
 	[snd_soc_dapm_out_drv] = 10,
 	[snd_soc_dapm_hp] = 10,
 	[snd_soc_dapm_spk] = 10,
+	[snd_soc_dapm_line] = 10,
 	[snd_soc_dapm_post] = 11,
 };
 
@@ -75,6 +76,7 @@ static int dapm_down_seq[] = {
 	[snd_soc_dapm_adc] = 1,
 	[snd_soc_dapm_hp] = 2,
 	[snd_soc_dapm_spk] = 2,
+	[snd_soc_dapm_line] = 2,
 	[snd_soc_dapm_out_drv] = 2,
 	[snd_soc_dapm_pga] = 4,
 	[snd_soc_dapm_mixer_named_ctl] = 5,
author maintainer
#9 lore raw

PATCH 9/47 dmaengine: at_hdmac: remove clear-on-read in atc_dostart()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <[email protected]>

commit ed8b0d67f33518a16c6b2450fe5ebebf180c2d04 upstream.

This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume.

---
 drivers/dma/at_hdmac.c |    4 ----
 1 file changed, 4 deletions(-)
drivers/dma/at_hdmac.c +0 -4
@@ -237,10 +237,6 @@ static void atc_dostart(struct at_dma_ch
 
 	vdbg_dump_regs(atchan);
 
-	/* clear any pending interrupt */
-	while (dma_readl(atdma, EBCISR))
-		cpu_relax();
-
 	channel_writel(atchan, SADDR, 0);
 	channel_writel(atchan, DADDR, 0);
 	channel_writel(atchan, CTRLA, 0);
author maintainer
#10 lore raw

PATCH 10/47 hwmon: fam15h_power: fix bogus values with current BIOSes

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andre Przywara <[email protected]>

commit 00250ec90963b7ef6678438888f3244985ecde14 upstream.

Newer BKDG[1] versions recommend a different initialization value for the running average range register in the northbridge. This improves the power reading by avoiding counter saturations resulting in bogus values for anything below about 80% of TDP power consumption. Updated BIOSes will have this new value set up from the beginning, but meanwhile we correct this value ourselves.
This needs to be done on all northbridges, even on those where the driver itself does not register at.

This fixes the driver on all current machines to provide proper values for idle load.

[1]
http://support.amd.com/us/Processor_TechDocs/42301_15h_Mod_00h-0Fh_BKDG.pdf
Chapter 3.8: D18F5xE0 Processor TDP Running Average (p. 452)

---
 drivers/hwmon/fam15h_power.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
drivers/hwmon/fam15h_power.c +39 -0
@@ -122,6 +122,38 @@ static bool __devinit fam15h_power_is_in
 	return true;
 }
 
+/*
+ * Newer BKDG versions have an updated recommendation on how to properly
+ * initialize the running average range (was: 0xE, now: 0x9). This avoids
+ * counter saturations resulting in bogus power readings.
+ * We correct this value ourselves to cope with older BIOSes.
+ */
+static void __devinit tweak_runavg_range(struct pci_dev *pdev)
+{
+	u32 val;
+	const struct pci_device_id affected_device = {
+		PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) };
+
+	/*
+	 * let this quirk apply only to the current version of the
+	 * northbridge, since future versions may change the behavior
+	 */
+	if (!pci_match_id(&affected_device, pdev))
+		return;
+
+	pci_bus_read_config_dword(pdev->bus,
+		PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+		REG_TDP_RUNNING_AVERAGE, &val);
+	if ((val & 0xf) != 0xe)
+		return;
+
+	val &= ~0xf;
+	val |=  0x9;
+	pci_bus_write_config_dword(pdev->bus,
+		PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+		REG_TDP_RUNNING_AVERAGE, val);
+}
+
 static void __devinit fam15h_power_init_data(struct pci_dev *f4,
 					     struct fam15h_power_data *data)
 {
@@ -155,6 +187,13 @@ static int __devinit fam15h_power_probe(
 	struct device *dev;
 	int err;
 
+	/*
+	 * though we ignore every other northbridge, we still have to
+	 * do the tweaking on _each_ node in MCM processors as the counters
+	 * are working hand-in-hand
+	 */
+	tweak_runavg_range(pdev);
+
 	if (!fam15h_power_is_internal_node0(pdev)) {
 		err = -ENODEV;
 		goto exit;
author maintainer
#11 lore raw

PATCH 11/47 hwmon: (fam15h_power) Fix pci_device_id array

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <[email protected]>

commit c3e40a9972428d6e2d8e287ed0233a57a218c30f upstream.

pci_match_id() takes an *array* of IDs which must be properly zero- terminated.

---
 drivers/hwmon/fam15h_power.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/hwmon/fam15h_power.c +6 -3
@@ -128,17 +128,20 @@ static bool __devinit fam15h_power_is_in
  * counter saturations resulting in bogus power readings.
  * We correct this value ourselves to cope with older BIOSes.
  */
+static DEFINE_PCI_DEVICE_TABLE(affected_device) = {
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ 0 }
+};
+
 static void __devinit tweak_runavg_range(struct pci_dev *pdev)
 {
 	u32 val;
-	const struct pci_device_id affected_device = {
-		PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) };
 
 	/*
 	 * let this quirk apply only to the current version of the
 	 * northbridge, since future versions may change the behavior
 	 */
-	if (!pci_match_id(&affected_device, pdev))
+	if (!pci_match_id(affected_device, pdev))
 		return;
 
 	pci_bus_read_config_dword(pdev->bus,
author maintainer
#12 lore raw

PATCH 12/47 drm/i915: handle input/output sdvo timings separately in mode_set

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <[email protected]>

commit 6651819b4b4fc3caa6964c5d825eb4bb996f3905 upstream.

We seem to have a decent confusion between the output timings and the input timings of the sdvo encoder. If I understand the code correctly, we use the original mode unchanged for the output timings, safe for the lvds case. And we should use the adjusted mode for input timings.

Clarify the situation by adding an explicit output_dtd to the sdvo mode_set function and streamline the code-flow by moving the input and output mode setting in the sdvo encode together.

Furthermore testing showed that the sdvo input timing needs the unadjusted dotclock, the sdvo chip will automatically compute the required pixel multiplier to get a dotclock above 100 MHz.

Fix this up when converting a drm mode to an sdvo dtd.

This regression was introduced in

commit c74696b9c890074c1e1ee3d7496fc71eb3680ced

Author: Pavel Roskin <[email protected]>
Date:   Thu Sep 2 14:46:34 2010 -0400

i915: revert some checks added by commit 32aad86f

particularly the following hunk:

# diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
# b/drivers/gpu/drm/i915/intel_sdvo.c
# index 093e914..62d22ae 100644
# --- a/drivers/gpu/drm/i915/intel_sdvo.c
# +++ b/drivers/gpu/drm/i915/intel_sdvo.c
# @@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
#
# /* We have tried to get input timing in mode_fixup, and filled into
# adjusted_mode */
# - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
# - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
# + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
# + if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
# input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags;
# - } else
# - intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
#
# /* If it's a TV, we already set the output timing in mode_fixup.
# * Otherwise, the output timing is equal to the input timing.

Due to questions raised in review, below a more elaborate analysis of the bug at hand:

Sdvo seems to have two timings, one is the output timing which will be sent over whatever is connected on the other side of the sdvo chip (panel, hdmi screen, tv), the other is the input timing which will be generated by the gmch pipe. It looks like sdvo is expected to scale between the two.

To make things slightly more complicated, we have a bunch of special cases:
- For lvds panel we always use a fixed output timing, namely intel_sdvo->sdvo_lvds_fixed_mode, hence that special case.
- Sdvo has an interface to generate a preferred input timing for a given output timing. This is the confusing thing that I've tried to clear up with the follow-on patches.
- A special requirement is that the input pixel clock needs to be between 100MHz and 200MHz (likely to keep it within the electromechanical design range of PCIe), 270MHz on later gen4+. Lower pixel clocks are doubled/quadrupled.

The thing this patch tries to fix is that the pipe needs to be explicitly instructed to double/quadruple the pixels and needs the correspondingly higher pixel clock, whereas the sdvo adaptor seems to do that itself and needs the unadjusted pixel clock. For the sdvo encode side we already set the pixel mutliplier with a different command (0x21).

This patch tries to fix this mess by:
- Keeping the output mode timing in the unadjusted plain mode, safe for the lvds case.
- Storing the input timing in the adjusted_mode with the adjusted pixel clock. This way we don't need to frob around with the core crtc mode set code.
- Fixing up the pixelclock when constructing the sdvo dtd timing struct. This is why the first hunk of the patch is an integral part of the series.
- Dropping the is_tv special case because input_dtd is equivalent to adjusted_mode after these changes. Follow-up patches clear this up further (by simply ripping out intel_sdvo->input_dtd because it's not needed).

v2: Extend commit message with an in-depth bug analysis.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157

---
 drivers/gpu/drm/i915/intel_sdvo.c |   34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)
drivers/gpu/drm/i915/intel_sdvo.c +18 -16
@@ -724,6 +724,7 @@ static void intel_sdvo_get_dtd_from_mode
 	uint16_t width, height;
 	uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len;
 	uint16_t h_sync_offset, v_sync_offset;
+	int mode_clock;
 
 	width = mode->crtc_hdisplay;
 	height = mode->crtc_vdisplay;
@@ -738,7 +739,11 @@ static void intel_sdvo_get_dtd_from_mode
 	h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
 	v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
 
-	dtd->part1.clock = mode->clock / 10;
+	mode_clock = mode->clock;
+	mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
+	mode_clock /= 10;
+	dtd->part1.clock = mode_clock;
+
 	dtd->part1.h_active = width & 0xff;
 	dtd->part1.h_blank = h_blank_len & 0xff;
 	dtd->part1.h_high = (((width >> 8) & 0xf) << 4) |
@@ -990,7 +995,7 @@ static void intel_sdvo_mode_set(struct d
 	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
 	u32 sdvox;
 	struct intel_sdvo_in_out_map in_out;
-	struct intel_sdvo_dtd input_dtd;
+	struct intel_sdvo_dtd input_dtd, output_dtd;
 	int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 	int rate;
 
@@ -1015,20 +1020,13 @@ static void intel_sdvo_mode_set(struct d
 					  intel_sdvo->attached_output))
 		return;
 
-	/* We have tried to get input timing in mode_fixup, and filled into
-	 * adjusted_mode.
-	 */
-	if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
-		input_dtd = intel_sdvo->input_dtd;
-	} else {
-		/* Set the output timing to the screen */
-		if (!intel_sdvo_set_target_output(intel_sdvo,
-						  intel_sdvo->attached_output))
-			return;
-
-		intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
-		(void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd);
-	}
+	/* lvds has a special fixed output timing. */
+	if (intel_sdvo->is_lvds)
+		intel_sdvo_get_dtd_from_mode(&output_dtd,
+					     intel_sdvo->sdvo_lvds_fixed_mode);
+	else
+		intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
+	(void) intel_sdvo_set_output_timing(intel_sdvo, &output_dtd);
 
 	/* Set the input timing to the screen. Assume always input 0. */
 	if (!intel_sdvo_set_target_input(intel_sdvo))
@@ -1046,6 +1044,10 @@ static void intel_sdvo_mode_set(struct d
 	    !intel_sdvo_set_tv_format(intel_sdvo))
 		return;
 
+	/* We have tried to get input timing in mode_fixup, and filled into
+	 * adjusted_mode.
+	 */
+	intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
 	(void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd);
 
 	switch (pixel_multiplier) {
author maintainer
#13 lore raw

PATCH 13/47 drm/i915: fix integer overflow in i915_gem_execbuffer2()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xi Wang <[email protected]>

commit ed8cd3b2cd61004cab85380c52b1817aca1ca49b upstream.

On 32-bit systems, a large args->buffer_count from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access.

This vulnerability was introduced in commit 8408c282 ("drm/i915:
First try a normal large kmalloc for the temporary exec buffers").

---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +2 -1
@@ -1296,7 +1296,8 @@ i915_gem_execbuffer2(struct drm_device *
 	struct drm_i915_gem_exec_object2 *exec2_list = NULL;
 	int ret;
 
-	if (args->buffer_count < 1) {
+	if (args->buffer_count < 1 ||
+	    args->buffer_count > UINT_MAX / sizeof(*exec2_list)) {
 		DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count);
 		return -EINVAL;
 	}
author maintainer
#14 lore raw

PATCH 14/47 drm/i915: fix integer overflow in i915_gem_do_execbuffer()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xi Wang <[email protected]>

commit 44afb3a04391a74309d16180d1e4f8386fdfa745 upstream.

On 32-bit systems, a large args->num_cliprects from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access.

This vulnerability was introduced in commit 432e58ed ("drm/i915: Avoid allocation for execbuffer object list").

---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +5 -0
@@ -1046,6 +1046,11 @@ i915_gem_do_execbuffer(struct drm_device
 			return -EINVAL;
 		}
 
+		if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) {
+			DRM_DEBUG("execbuf with %u cliprects\n",
+				  args->num_cliprects);
+			return -EINVAL;
+		}
 		cliprects = kmalloc(args->num_cliprects * sizeof(*cliprects),
 				    GFP_KERNEL);
 		if (cliprects == NULL) {
author maintainer
#15 lore raw

PATCH 15/47 nl80211: ensure interface is up in various APIs

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

commit 2b5f8b0b44e17e625cfba1e7b88db44f4dcc0441 upstream. [backported by Ben Greear]

The nl80211 handling code should ensure as much as it can that the interface is in a valid state, it can certainly ensure the interface is running.

Not doing so can cause calls through mac80211 into the driver that result in warnings and unspecified behaviour in the driver.

---
 net/wireless/nl80211.c |   29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
net/wireless/nl80211.c +17 -12
@@ -1181,6 +1181,11 @@ static int nl80211_set_wiphy(struct sk_b
 			goto bad_res;
 		}
 
+		if (!netif_running(netdev)) {
+			result = -ENETDOWN;
+			goto bad_res;
+		}
+
 		nla_for_each_nested(nl_txq_params,
 				    info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
 				    rem_txq_params) {
@@ -5432,7 +5437,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_get_key,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5464,7 +5469,7 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 		.doit = nl80211_addset_beacon,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5472,7 +5477,7 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 		.doit = nl80211_addset_beacon,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5496,7 +5501,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_set_station,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5512,7 +5517,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_del_station,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5545,7 +5550,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_del_mpath,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5553,7 +5558,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_set_bss,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5579,7 +5584,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_get_mesh_config,
 		.policy = nl80211_policy,
 		/* can be retrieved by unprivileged users */
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5711,7 +5716,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_setdel_pmksa,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5719,7 +5724,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_setdel_pmksa,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5727,7 +5732,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_flush_pmksa,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -5815,7 +5820,7 @@ static struct genl_ops nl80211_ops[] = {
 		.doit = nl80211_set_wds_peer,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
author maintainer
#16 lore raw

PATCH 16/47 EHCI: fix criterion for resuming the root hub

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit dc75ce9d929aabeb0843a6b1a4ab320e58ba1597 upstream.

This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended.

Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended.

In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases.

---
 drivers/usb/host/ehci-hcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/ehci-hcd.c +1 -1
@@ -865,7 +865,7 @@ static irqreturn_t ehci_irq (struct usb_
 		pcd_status = status;
 
 		/* resume root hub? */
-		if (!(cmd & CMD_RUN))
+		if (hcd->state == HC_STATE_SUSPENDED)
 			usb_hcd_resume_root_hub(hcd);
 
 		/* get per-port change detect bits */
author maintainer
#17 lore raw

PATCH 17/47 brcm80211: smac: resume transmit fifo upon receiving frames

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arend van Spriel <[email protected]>

commit badc4f07622f0f7093a201638f45e85765f1b5e4 upstream.

There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211.

This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3.

---
 drivers/staging/brcm80211/brcmsmac/wlc_bmac.c |    3 +--
 drivers/staging/brcm80211/brcmsmac/wlc_bmac.h |    1 +
 drivers/staging/brcm80211/brcmsmac/wlc_main.c |    8 ++++++++
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/staging/brcm80211/brcmsmac/wlc_bmac.c +1 -2
@@ -143,7 +143,6 @@ static bool wlc_bmac_validate_chip_acces
 static char *wlc_get_macaddr(struct wlc_hw_info *wlc_hw);
 static void wlc_mhfdef(struct wlc_info *wlc, u16 *mhfs, u16 mhf2_init);
 static void wlc_mctrl_write(struct wlc_hw_info *wlc_hw);
-static void wlc_bmac_mute(struct wlc_hw_info *wlc_hw, bool want, mbool flags);
 static void wlc_ucode_mute_override_set(struct wlc_hw_info *wlc_hw);
 static void wlc_ucode_mute_override_clear(struct wlc_hw_info *wlc_hw);
 static u32 wlc_wlintrsoff(struct wlc_info *wlc);
@@ -2725,7 +2724,7 @@ void wlc_intrsrestore(struct wlc_info *w
 	W_REG(&wlc_hw->regs->macintmask, wlc->macintmask);
 }
 
-static void wlc_bmac_mute(struct wlc_hw_info *wlc_hw, bool on, mbool flags)
+void wlc_bmac_mute(struct wlc_hw_info *wlc_hw, bool on, mbool flags)
 {
 	u8 null_ether_addr[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
 
drivers/staging/brcm80211/brcmsmac/wlc_bmac.h +1 -0
@@ -103,6 +103,7 @@ extern void wlc_bmac_macphyclk_set(struc
 extern void wlc_bmac_phy_reset(struct wlc_hw_info *wlc_hw);
 extern void wlc_bmac_corereset(struct wlc_hw_info *wlc_hw, u32 flags);
 extern void wlc_bmac_reset(struct wlc_hw_info *wlc_hw);
+extern void wlc_bmac_mute(struct wlc_hw_info *wlc_hw, bool want, mbool flags);
 extern void wlc_bmac_init(struct wlc_hw_info *wlc_hw, chanspec_t chanspec,
 			  bool mute);
 extern int wlc_bmac_up_prep(struct wlc_hw_info *wlc_hw);
drivers/staging/brcm80211/brcmsmac/wlc_main.c +8 -0
@@ -6145,6 +6145,7 @@ wlc_recvctl(struct wlc_info *wlc, d11rxh
 {
 	int len_mpdu;
 	struct ieee80211_rx_status rx_status;
+	struct ieee80211_hdr *hdr;
 
 	memset(&rx_status, 0, sizeof(rx_status));
 	prep_mac80211_status(wlc, rxh, p, &rx_status);
@@ -6154,6 +6155,13 @@ wlc_recvctl(struct wlc_info *wlc, d11rxh
 	skb_pull(p, D11_PHY_HDR_LEN);
 	__skb_trim(p, len_mpdu);
 
+	/* unmute transmit */
+	if (wlc->hw->suspended_fifos) {
+		hdr = (struct ieee80211_hdr *)p->data;
+		if (ieee80211_is_beacon(hdr->frame_control))
+			wlc_bmac_mute(wlc->hw, false, 0);
+	}
+
 	memcpy(IEEE80211_SKB_RXCB(p), &rx_status, sizeof(rx_status));
 	ieee80211_rx_irqsafe(wlc->pub->ieee_hw, p);
 	return;
author maintainer
#18 lore raw

PATCH 18/47 Fix modpost failures in fedora 17

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Miller <[email protected]>

commit e88aa7bbbe3046a125ea1936b16bb921cc9c6349 upstream.

The symbol table on x86-64 starts to have entries that have names like:

_GLOBAL__sub_I_65535_0___mod_x86cpu_device_table

They are of type STT_FUNCTION and this one had a length of 18. This matched the device ID validation logic and it barfed because the length did not meet the device type's criteria.

--------------------
FATAL: arch/x86/crypto/aesni-intel: sizeof(struct x86cpu_device_id)=16 is not a modulo of the size of section __mod_x86cpu_device_table=18. Fix definition of struct x86cpu_device_id in mod_devicetable.h
--------------------

These are some kind of compiler tool internal stuff being emitted and not something we want to inspect in modpost's device ID table validation code.

So skip the symbol if it is not of type STT_OBJECT.

---
Thanks,
Jonathan

 scripts/mod/file2alias.c |    4 ++++
 1 file changed, 4 insertions(+)
scripts/mod/file2alias.c +4 -0
@@ -905,6 +905,10 @@ void handle_moddevtable(struct module *m
 	if (!sym->st_shndx || get_secindex(info, sym) >= info->num_sections)
 		return;
 
+	/* We're looking for an object */
+	if (ELF_ST_TYPE(sym->st_info) != STT_OBJECT)
+		return;
+
 	/* Handle all-NULL symbols allocated into .bss */
 	if (info->sechdrs[get_secindex(info, sym)].sh_type & SHT_NOBITS) {
 		zeros = calloc(1, sym->st_size);
author maintainer
#19 lore raw

PATCH 19/47 KVM: unmap pages from the iommu when slots are removed

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Williamson <[email protected]>

commit 32f6daad4651a748a58a3ab6da0611862175722f upstream.

We've been adding new mappings, but not destroying old mappings. This can lead to a page leak as pages are pinned using get_user_pages, but only unpinned with put_page if they still exist in the memslots list on vm shutdown. A memslot that is destroyed while an iommu domain is enabled for the guest will therefore result in an elevated page reference count that is never cleared.

Additionally, without this fix, the iommu is only programmed with the first translation for a gpa. This can result in peer-to-peer errors if a mapping is destroyed and replaced by a new mapping at the same gpa as the iommu will still be pointing to the original, pinned memory address.

---
 include/linux/kvm_host.h |    6 ++++++
 virt/kvm/iommu.c         |   12 ++++++++----
 virt/kvm/kvm_main.c      |    5 +++--
 3 files changed, 17 insertions(+), 6 deletions(-)
include/linux/kvm_host.h +6 -0
@@ -554,6 +554,7 @@ void kvm_free_irq_source_id(struct kvm *
 
 #ifdef CONFIG_IOMMU_API
 int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
+void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
 int kvm_iommu_map_guest(struct kvm *kvm);
 int kvm_iommu_unmap_guest(struct kvm *kvm);
 int kvm_assign_device(struct kvm *kvm,
@@ -567,6 +568,11 @@ static inline int kvm_iommu_map_pages(st
 	return 0;
 }
 
+static inline void kvm_iommu_unmap_pages(struct kvm *kvm,
+					 struct kvm_memory_slot *slot)
+{
+}
+
 static inline int kvm_iommu_map_guest(struct kvm *kvm)
 {
 	return -ENODEV;
virt/kvm/iommu.c +8 -4
@@ -285,6 +285,11 @@ static void kvm_iommu_put_pages(struct k
 	}
 }
 
+void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
+{
+	kvm_iommu_put_pages(kvm, slot->base_gfn, slot->npages);
+}
+
 static int kvm_iommu_unmap_memslots(struct kvm *kvm)
 {
 	int i, idx;
@@ -293,10 +298,9 @@ static int kvm_iommu_unmap_memslots(stru
 	idx = srcu_read_lock(&kvm->srcu);
 	slots = kvm_memslots(kvm);
 
-	for (i = 0; i < slots->nmemslots; i++) {
-		kvm_iommu_put_pages(kvm, slots->memslots[i].base_gfn,
-				    slots->memslots[i].npages);
-	}
+	for (i = 0; i < slots->nmemslots; i++)
+		kvm_iommu_unmap_pages(kvm, &slots->memslots[i]);
+
 	srcu_read_unlock(&kvm->srcu, idx);
 
 	return 0;
virt/kvm/kvm_main.c +3 -2
@@ -796,12 +796,13 @@ skip_lpage:
 	if (r)
 		goto out_free;
 
-	/* map the pages in iommu page table */
+	/* map/unmap the pages in iommu page table */
 	if (npages) {
 		r = kvm_iommu_map_pages(kvm, &new);
 		if (r)
 			goto out_free;
-	}
+	} else
+		kvm_iommu_unmap_pages(kvm, &old);
 
 	r = -ENOMEM;
 	slots = kzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
author maintainer
#20 lore raw

PATCH 20/47 mmc: unbreak sdhci-esdhc-imx on i.MX25

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric B�nard <[email protected]>

commit b89152824f993a9572b47eb31f4579feadeac34c upstream.

This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read).

---
Thanks,
Jonathan

 drivers/mmc/host/sdhci-esdhc-imx.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/mmc/host/sdhci-esdhc-imx.c +1 -2
@@ -245,8 +245,7 @@ static int esdhc_pltfm_init(struct sdhci
 	}
 	pltfm_host->priv = imx_data;
 
-	if (!cpu_is_mx25())
-		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
 	if (cpu_is_mx25() || cpu_is_mx35()) {
 		/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
author maintainer
#21 lore raw

PATCH 21/47 nfsd: fix b0rken error value for setattr on read-only mount

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Al Viro <[email protected]>

commit 96f6f98501196d46ce52c2697dd758d9300c63f5 upstream.

..._want_write() returns -EROFS on failure, _not_ an NFS error value.

---
 fs/nfsd/nfs4proc.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
fs/nfsd/nfs4proc.c +4 -3
@@ -812,6 +812,7 @@ nfsd4_setattr(struct svc_rqst *rqstp, st
 	      struct nfsd4_setattr *setattr)
 {
 	__be32 status = nfs_ok;
+	int err;
 
 	if (setattr->sa_iattr.ia_valid & ATTR_SIZE) {
 		nfs4_lock_state();
@@ -823,9 +824,9 @@ nfsd4_setattr(struct svc_rqst *rqstp, st
 			return status;
 		}
 	}
-	status = mnt_want_write(cstate->current_fh.fh_export->ex_path.mnt);
-	if (status)
-		return status;
+	err = mnt_want_write(cstate->current_fh.fh_export->ex_path.mnt);
+	if (err)
+		return nfserrno(err);
 	status = nfs_ok;
 
 	status = check_attr_support(rqstp, cstate, setattr->sa_bmval,
author maintainer
#22 lore raw

PATCH 22/47 nfsd: fix error values returned by nfsd4_lockt() when nfsd_open() fails

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Al Viro <[email protected]>

commit 04da6e9d63427b2d0fd04766712200c250b3278f upstream.

nfsd_open() already returns an NFS error value; only vfs_test_lock() result needs to be fed through nfserrno(). Broken by commit 55ef12 (nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT) three years ago...

---
 fs/nfsd/nfs4state.c |   23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)
fs/nfsd/nfs4state.c +9 -14
@@ -3956,16 +3956,14 @@ out:
  * vfs_test_lock.  (Arguably perhaps test_lock should be done with an
  * inode operation.)
  */
-static int nfsd_test_lock(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file_lock *lock)
+static __be32 nfsd_test_lock(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file_lock *lock)
 {
 	struct file *file;
-	int err;
-
-	err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
-	if (err)
-		return err;
-	err = vfs_test_lock(file, lock);
-	nfsd_close(file);
+	__be32 err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
+	if (!err) {
+		err = nfserrno(vfs_test_lock(file, lock));
+		nfsd_close(file);
+	}
 	return err;
 }
 
@@ -3978,7 +3976,6 @@ nfsd4_lockt(struct svc_rqst *rqstp, stru
 {
 	struct inode *inode;
 	struct file_lock file_lock;
-	int error;
 	__be32 status;
 
 	if (locks_in_grace())
@@ -4030,12 +4027,10 @@ nfsd4_lockt(struct svc_rqst *rqstp, stru
 
 	nfs4_transform_lock_offset(&file_lock);
 
-	status = nfs_ok;
-	error = nfsd_test_lock(rqstp, &cstate->current_fh, &file_lock);
-	if (error) {
-		status = nfserrno(error);
+	status = nfsd_test_lock(rqstp, &cstate->current_fh, &file_lock);
+	if (status)
 		goto out;
-	}
+
 	if (file_lock.fl_type != F_UNLCK) {
 		status = nfserr_denied;
 		nfs4_set_lock_denied(&file_lock, &lockt->lt_denied);
author maintainer
#23 lore raw

PATCH 23/47 Revert "usb: Fix build error due to dma_mask is not at pdev_archdata at ARM"

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

This reverts commit d39514c14bd941232976b68e2750dc725b90e724 which is e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream as it causes oopses on some ppc systems.

---
 drivers/usb/host/fsl-mph-dr-of.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/host/fsl-mph-dr-of.c +1 -0
@@ -93,6 +93,7 @@ struct platform_device * __devinit fsl_u
 	pdev->dev.parent = &ofdev->dev;
 
 	pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
+	pdev->dev.dma_mask = &pdev->archdata.dma_mask;
 	*pdev->dev.dma_mask = *ofdev->dev.dma_mask;
 
 	retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
#24 lore raw

Re: [ 23/47] [PATCH] Revert "usb: Fix build error due to dma_mask is not at pdev_archdata at ARM"

Quoted 7 lines · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

This reverts commit d39514c14bd941232976b68e2750dc725b90e724 which is e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream as it causes oopses on some ppc systems.

[...]

Is this needed for 3.2.y as well?

Ben.

Signature · 3 lines
Ben Hutchings
Hoare's Law of Large Problems:
        Inside every large problem is a small problem struggling to get out.
author maintainer
#25 lore raw

Re: [ 23/47] [PATCH] Revert "usb: Fix build error due to dma_mask is not at pdev_archdata at ARM"

Quoted 11 lines · Ben Hutchings
Quoted 7 lines · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

This reverts commit d39514c14bd941232976b68e2750dc725b90e724 which is e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream as it causes oopses on some ppc systems.

[...]

Is this needed for 3.2.y as well?

I do not think so.

greg k-h

author maintainer
#26 lore raw

PATCH 24/47 USB: cdc-wdm: fix race leading leading to memory corruption

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <[email protected]>

commit 5c22837adca7c30b66121cf18ad3e160134268d4 upstream.

This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34

---
 drivers/usb/class/cdc-wdm.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/usb/class/cdc-wdm.c +5 -2
@@ -108,8 +108,9 @@ static void wdm_out_callback(struct urb
 	spin_lock(&desc->iuspin);
 	desc->werr = urb->status;
 	spin_unlock(&desc->iuspin);
-	clear_bit(WDM_IN_USE, &desc->flags);
 	kfree(desc->outbuf);
+	desc->outbuf = NULL;
+	clear_bit(WDM_IN_USE, &desc->flags);
 	wake_up(&desc->wait);
 }
 
@@ -312,7 +313,7 @@ static ssize_t wdm_write
 	if (we < 0)
 		return -EIO;
 
-	desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf) {
 		rv = -ENOMEM;
 		goto outnl;
@@ -376,10 +377,12 @@ static ssize_t wdm_write
 	req->wIndex = desc->inum;
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
+	desc->outbuf = buf;
 
 	rv = usb_submit_urb(desc->command, GFP_KERNEL);
 	if (rv < 0) {
 		kfree(buf);
+		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 	} else {
author maintainer
#27 lore raw

PATCH 25/47 USB: EHCI: fix crash during suspend on ASUS computers

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit 151b61284776be2d6f02d48c23c3625678960b97 upstream.

This patch (as1545) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep.

The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs.

This fixes Bugzilla #42728.

---
 drivers/usb/core/hcd-pci.c  |    9 +++++++++
 drivers/usb/host/ehci-pci.c |    8 ++++++++
 include/linux/usb/hcd.h     |    2 ++
 3 files changed, 19 insertions(+)
drivers/usb/core/hcd-pci.c +9 -0
@@ -495,6 +495,15 @@ static int hcd_pci_suspend_noirq(struct
 
 	pci_save_state(pci_dev);
 
+	/*
+	 * Some systems crash if an EHCI controller is in D3 during
+	 * a sleep transition.  We have to leave such controllers in D0.
+	 */
+	if (hcd->broken_pci_sleep) {
+		dev_dbg(dev, "Staying in PCI D0\n");
+		return retval;
+	}
+
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
drivers/usb/host/ehci-pci.c +8 -0
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+				hcd->broken_pci_sleep = 1;
+				device_set_wakeup_capable(&pdev->dev, false);
+			}
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
include/linux/usb/hcd.h +2 -0
@@ -128,6 +128,8 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		broken_pci_sleep:1;	/* Don't put the
+			controller in PCI-D3 for system sleep */
 
 	int			irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
author maintainer
#28 lore raw

PATCH 26/47 USB: gadget: storage gadgets send wrong error code for unknown commands

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit c85dcdac5852295cf6822f5c4331a6ddab72581f upstream.

This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect.

When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them.

---
 drivers/usb/gadget/f_mass_storage.c |    2 +-
 drivers/usb/gadget/file_storage.c   |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/usb/gadget/f_mass_storage.c +1 -1
@@ -2187,7 +2187,7 @@ unknown_cmnd:
 		common->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
 		reply = check_command(common, common->cmnd_size,
-				      DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
 		if (reply == 0) {
 			common->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;
drivers/usb/gadget/file_storage.c +1 -1
@@ -2553,7 +2553,7 @@ static int do_scsi_command(struct fsg_de
 		fsg->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
 		if ((reply = check_command(fsg, fsg->cmnd_size,
-				DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
 			fsg->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;
 		}
author maintainer
#29 lore raw

PATCH 27/47 usb gadget: uvc: uvc_request_data::length field must be signed

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <[email protected]>

commit 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 upstream.

The field is used to pass the UVC request data length, but can also be used to signal an error when setting it to a negative value. Switch from unsigned int to __s32.

---
 drivers/usb/gadget/uvc.h      |    2 +-
 drivers/usb/gadget/uvc_v4l2.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/usb/gadget/uvc.h +1 -1
@@ -29,7 +29,7 @@
 
 struct uvc_request_data
 {
-	unsigned int length;
+	__s32 length;
 	__u8 data[60];
 };
 
drivers/usb/gadget/uvc_v4l2.c +1 -1
@@ -41,7 +41,7 @@ uvc_send_response(struct uvc_device *uvc
 	if (data->length < 0)
 		return usb_ep_set_halt(cdev->gadget->ep0);
 
-	req->length = min(uvc->event_length, data->length);
+	req->length = min_t(unsigned int, uvc->event_length, data->length);
 	req->zero = data->length < uvc->event_length;
 	req->dma = DMA_ADDR_INVALID;
 
author maintainer
#30 lore raw

PATCH 28/47 pipes: add a "packetized pipe" mode for writing

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <[email protected]>

commit 9883035ae7edef3ec62ad215611cb8e17d6a1a5d upstream.

The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface.

---
 fs/pipe.c                 |   31 +++++++++++++++++++++++++++++--
 include/linux/pipe_fs_i.h |    1 +
 2 files changed, 30 insertions(+), 2 deletions(-)
fs/pipe.c +29 -2
@@ -345,6 +345,16 @@ static const struct pipe_buf_operations
 	.get = generic_pipe_buf_get,
 };
 
+static const struct pipe_buf_operations packet_pipe_buf_ops = {
+	.can_merge = 0,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.confirm = generic_pipe_buf_confirm,
+	.release = anon_pipe_buf_release,
+	.steal = generic_pipe_buf_steal,
+	.get = generic_pipe_buf_get,
+};
+
 static ssize_t
 pipe_read(struct kiocb *iocb, const struct iovec *_iov,
 	   unsigned long nr_segs, loff_t pos)
@@ -406,6 +416,13 @@ redo:
 			ret += chars;
 			buf->offset += chars;
 			buf->len -= chars;
+
+			/* Was it a packet buffer? Clean up and exit */
+			if (buf->flags & PIPE_BUF_FLAG_PACKET) {
+				total_len = chars;
+				buf->len = 0;
+			}
+
 			if (!buf->len) {
 				buf->ops = NULL;
 				ops->release(pipe, buf);
@@ -458,6 +475,11 @@ redo:
 	return ret;
 }
 
+static inline int is_packetized(struct file *file)
+{
+	return (file->f_flags & O_DIRECT) != 0;
+}
+
 static ssize_t
 pipe_write(struct kiocb *iocb, const struct iovec *_iov,
 	    unsigned long nr_segs, loff_t ppos)
@@ -592,6 +614,11 @@ redo2:
 			buf->ops = &anon_pipe_buf_ops;
 			buf->offset = 0;
 			buf->len = chars;
+			buf->flags = 0;
+			if (is_packetized(filp)) {
+				buf->ops = &packet_pipe_buf_ops;
+				buf->flags = PIPE_BUF_FLAG_PACKET;
+			}
 			pipe->nrbufs = ++bufs;
 			pipe->tmp_page = NULL;
 
@@ -1012,7 +1039,7 @@ struct file *create_write_pipe(int flags
 		goto err_dentry;
 	f->f_mapping = inode->i_mapping;
 
-	f->f_flags = O_WRONLY | (flags & O_NONBLOCK);
+	f->f_flags = O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT));
 	f->f_version = 0;
 
 	return f;
@@ -1056,7 +1083,7 @@ int do_pipe_flags(int *fd, int flags)
 	int error;
 	int fdw, fdr;
 
-	if (flags & ~(O_CLOEXEC | O_NONBLOCK))
+	if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT))
 		return -EINVAL;
 
 	fw = create_write_pipe(flags);
include/linux/pipe_fs_i.h +1 -0
@@ -8,6 +8,7 @@
 #define PIPE_BUF_FLAG_LRU	0x01	/* page is on the LRU */
 #define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
 #define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
+#define PIPE_BUF_FLAG_PACKET	0x08	/* read() as a packet */
 
 /**
  *	struct pipe_buffer - a linux kernel pipe buffer
author maintainer
#31 lore raw

PATCH 29/47 autofs: make the autofsv5 packet file descriptor use a packetized pipe

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <[email protected]>

commit 64f371bc3107e69efce563a3d0f0e6880de0d537 upstream.

The autofs packet size has had a very unfortunate size problem on x86:
because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively).

We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4abae ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel.

But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes.

As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9dedd.

With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly.

However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away.

This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily.

Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces.

---
 fs/autofs4/autofs_i.h  |   11 +++++++++++
 fs/autofs4/dev-ioctl.c |    2 +-
 fs/autofs4/inode.c     |    2 +-
 3 files changed, 13 insertions(+), 2 deletions(-)
fs/autofs4/autofs_i.h +11 -0
@@ -278,6 +278,17 @@ int autofs4_fill_super(struct super_bloc
 struct autofs_info *autofs4_new_ino(struct autofs_sb_info *);
 void autofs4_clean_ino(struct autofs_info *);
 
+static inline int autofs_prepare_pipe(struct file *pipe)
+{
+	if (!pipe->f_op || !pipe->f_op->write)
+		return -EINVAL;
+	if (!S_ISFIFO(pipe->f_dentry->d_inode->i_mode))
+		return -EINVAL;
+	/* We want a packet pipe */
+	pipe->f_flags |= O_DIRECT;
+	return 0;
+}
+
 /* Queue management functions */
 
 int autofs4_wait(struct autofs_sb_info *,struct dentry *, enum autofs_notify);
fs/autofs4/dev-ioctl.c +1 -1
@@ -376,7 +376,7 @@ static int autofs_dev_ioctl_setpipefd(st
 			err = -EBADF;
 			goto out;
 		}
-		if (!pipe->f_op || !pipe->f_op->write) {
+		if (autofs_prepare_pipe(pipe) < 0) {
 			err = -EPIPE;
 			fput(pipe);
 			goto out;
fs/autofs4/inode.c +1 -1
@@ -292,7 +292,7 @@ int autofs4_fill_super(struct super_bloc
 		printk("autofs: could not open pipe file descriptor\n");
 		goto fail_dput;
 	}
-	if (!pipe->f_op || !pipe->f_op->write)
+	if (autofs_prepare_pipe(pipe) < 0)
 		goto fail_fput;
 	sbi->pipe = pipe;
 	sbi->pipefd = pipefd;
author maintainer
#32 lore raw

PATCH 30/47 ARM: 7403/1: tls: remove covert channel via TPIDRURW

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Will Deacon <[email protected]>

commit 6a1c53124aa161eb624ce7b1e40ade728186d34c upstream.

TPIDRURW is a user read/write register forming part of the group of thread registers in more recent versions of the ARM architecture (~v6+).

Currently, the kernel does not touch this register, which allows tasks to communicate covertly by reading and writing to the register without context-switching affecting its contents.

This patch clears TPIDRURW when TPIDRURO is updated via the set_tls macro, which is called directly from __switch_to. Since the current behaviour makes the register useless to userspace as far as thread pointers are concerned, simply clearing the register (rather than saving and restoring it) will not cause any problems to userspace.

---
 arch/arm/include/asm/tls.h |    4 ++++
 1 file changed, 4 insertions(+)
arch/arm/include/asm/tls.h +4 -0
@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 
author maintainer
#33 lore raw

PATCH 31/47 SCSI: libsas: fix sas_find_bcast_phy() in the presence of vacant phys

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Jackson <[email protected]>

commit 1699490db339e2c6b3037ea8e7dcd6b2755b688e upstream.

If an expander reports 'PHY VACANT' for a phy index prior to the one that generated a BCN libsas fails rediscovery. Since a vacant phy is defined as a valid phy index that will never have an attached device just continue the search.

---
 drivers/scsi/libsas/sas_expander.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/scsi/libsas/sas_expander.c +12 -5
@@ -1632,9 +1632,17 @@ static int sas_find_bcast_phy(struct dom
 		int phy_change_count = 0;
 
 		res = sas_get_phy_change_count(dev, i, &phy_change_count);
-		if (res)
-			goto out;
-		else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+		switch (res) {
+		case SMP_RESP_PHY_VACANT:
+		case SMP_RESP_NO_PHY:
+			continue;
+		case SMP_RESP_FUNC_ACC:
+			break;
+		default:
+			return res;
+		}
+
+		if (phy_change_count != ex->ex_phy[i].phy_change_count) {
 			if (update)
 				ex->ex_phy[i].phy_change_count =
 					phy_change_count;
@@ -1642,8 +1650,7 @@ static int sas_find_bcast_phy(struct dom
 			return 0;
 		}
 	}
-out:
-	return res;
+	return 0;
 }
 
 static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
author maintainer
#34 lore raw

PATCH 32/47 SCSI: libsas: fix false positive device attached conditions

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams <[email protected]>

commit 7d1d865181185bdf1316d236b1b4bd02c9020729 upstream.

Normalize phy->attached_sas_addr to return a zero-address in the case when device-type == NO_DEVICE or the linkrate is invalid to handle expanders that put non-zero sas addresses in the discovery response:

sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device)
sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device)
sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device)
sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device)

---
 drivers/scsi/libsas/sas_expander.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/scsi/libsas/sas_expander.c +8 -1
@@ -192,7 +192,14 @@ static void sas_set_ex_phy(struct domain
 	phy->attached_sata_ps   = dr->attached_sata_ps;
 	phy->attached_iproto = dr->iproto << 1;
 	phy->attached_tproto = dr->tproto << 1;
-	memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+	/* help some expanders that fail to zero sas_address in the 'no
+	 * device' case
+	 */
+	if (phy->attached_dev_type == NO_DEVICE ||
+	    phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+	else
+		memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
 	phy->attached_phy_id = dr->attached_phy_id;
 	phy->phy_change_count = dr->change_count;
 	phy->routing_attr = dr->routing_attr;
author maintainer
#35 lore raw

PATCH 33/47 efi: Add new variable attributes

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <[email protected]>

commit 41b3254c93acc56adc3c4477fef7c9512d47659e upstream.

More recent versions of the UEFI spec have added new attributes for variables. Add them.

---
 include/linux/efi.h |   11 +++++++++++
 1 file changed, 11 insertions(+)
include/linux/efi.h +11 -0
@@ -347,7 +347,18 @@ extern int __init efi_setup_pcdp_console
 #define EFI_VARIABLE_NON_VOLATILE       0x0000000000000001
 #define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
 #define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
+#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008
+#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010
+#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020
+#define EFI_VARIABLE_APPEND_WRITE	0x0000000000000040
 
+#define EFI_VARIABLE_MASK 	(EFI_VARIABLE_NON_VOLATILE | \
+				EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+				EFI_VARIABLE_RUNTIME_ACCESS | \
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD | \
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_APPEND_WRITE)
 /*
  * EFI Device Path information
  */
author maintainer
#36 lore raw

PATCH 34/47 efivars: String functions

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Waychison <[email protected]>

commit a2940908391f3cee72e38769b30e829b22742b5b upstream.

Fix the string functions in the efivars driver to be called utf16_* instead of utf8_* as the encoding is utf16, not utf8.

As well, rename utf16_strlen to utf16_strnlen as it takes a maxlength argument and the name should be consistent with the standard C function names. utf16_strlen is still provided for convenience in a subsequent patch.

---
 drivers/firmware/efivars.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)
drivers/firmware/efivars.c +16 -10
@@ -141,23 +141,29 @@ efivar_create_sysfs_entry(struct efivars
 
 /* Return the number of unicode characters in data */
 static unsigned long
-utf8_strlen(efi_char16_t *data, unsigned long maxlength)
+utf16_strnlen(efi_char16_t *s, size_t maxlength)
 {
 	unsigned long length = 0;
 
-	while (*data++ != 0 && length < maxlength)
+	while (*s++ != 0 && length < maxlength)
 		length++;
 	return length;
 }
 
+static unsigned long
+utf16_strlen(efi_char16_t *s)
+{
+	return utf16_strnlen(s, ~0UL);
+}
+
 /*
  * Return the number of bytes is the length of this string
  * Note: this is NOT the same as the number of unicode characters
  */
 static inline unsigned long
-utf8_strsize(efi_char16_t *data, unsigned long maxlength)
+utf16_strsize(efi_char16_t *data, unsigned long maxlength)
 {
-	return utf8_strlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
+	return utf16_strnlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
 }
 
 static efi_status_t
@@ -414,8 +420,8 @@ static ssize_t efivar_create(struct file
 	 * Does this variable already exist?
 	 */
 	list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
-		strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
-		strsize2 = utf8_strsize(new_var->VariableName, 1024);
+		strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
+		strsize2 = utf16_strsize(new_var->VariableName, 1024);
 		if (strsize1 == strsize2 &&
 			!memcmp(&(search_efivar->var.VariableName),
 				new_var->VariableName, strsize1) &&
@@ -447,8 +453,8 @@ static ssize_t efivar_create(struct file
 
 	/* Create the entry in sysfs.  Locking is not required here */
 	status = efivar_create_sysfs_entry(efivars,
-					   utf8_strsize(new_var->VariableName,
-							1024),
+					   utf16_strsize(new_var->VariableName,
+							 1024),
 					   new_var->VariableName,
 					   &new_var->VendorGuid);
 	if (status) {
@@ -477,8 +483,8 @@ static ssize_t efivar_delete(struct file
 	 * Does this variable already exist?
 	 */
 	list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
-		strsize1 = utf8_strsize(search_efivar->var.VariableName, 1024);
-		strsize2 = utf8_strsize(del_var->VariableName, 1024);
+		strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
+		strsize2 = utf16_strsize(del_var->VariableName, 1024);
 		if (strsize1 == strsize2 &&
 			!memcmp(&(search_efivar->var.VariableName),
 				del_var->VariableName, strsize1) &&
author maintainer
#37 lore raw

PATCH 35/47 efivars: fix warnings when CONFIG_PSTORE=n

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tony Luck <[email protected]>

commit b728a5c806fb36f9adebf2a862bbd015e074afca upstream.

drivers/firmware/efivars.c:161: warning: ‘utf16_strlen’ defined but not used utf16_strlen() is only used inside CONFIG_PSTORE - make this "static inline" to shut the compiler up [thanks to hpa for the suggestion].

drivers/firmware/efivars.c:602: warning: initialization from incompatible pointer type Between v1 and v2 of this patch series we decided to make the "part" number unsigned - but missed fixing the stub version of efi_pstore_write()

[took the static part of the patch, not the pstore part, for 3.0-stable, to fix the compiler warning we had - gregkh]

---
 drivers/firmware/efivars.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/efivars.c +1 -1
@@ -150,7 +150,7 @@ utf16_strnlen(efi_char16_t *s, size_t ma
 	return length;
 }
 
-static unsigned long
+static inline unsigned long
 utf16_strlen(efi_char16_t *s)
 {
 	return utf16_strnlen(s, ~0UL);
author maintainer
#38 lore raw

PATCH 36/47 efi: Validate UEFI boot variables

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <[email protected]>

commit fec6c20b570bcf541e581fc97f2e0cbdb9725b98 upstream.

A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable.

---
 drivers/firmware/efivars.c |  182 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 182 insertions(+)
drivers/firmware/efivars.c +182 -0
@@ -166,6 +166,176 @@ utf16_strsize(efi_char16_t *data, unsign
 	return utf16_strnlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
 }
 
+static bool
+validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len)
+{
+	struct efi_generic_dev_path *node;
+	int offset = 0;
+
+	node = (struct efi_generic_dev_path *)buffer;
+
+	while (offset < len) {
+		offset += node->length;
+
+		if (offset > len)
+			return false;
+
+		if ((node->type == EFI_DEV_END_PATH ||
+		     node->type == EFI_DEV_END_PATH2) &&
+		    node->sub_type == EFI_DEV_END_ENTIRE)
+			return true;
+
+		node = (struct efi_generic_dev_path *)(buffer + offset);
+	}
+
+	/*
+	 * If we're here then either node->length pointed past the end
+	 * of the buffer or we reached the end of the buffer without
+	 * finding a device path end node.
+	 */
+	return false;
+}
+
+static bool
+validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len)
+{
+	/* An array of 16-bit integers */
+	if ((len % 2) != 0)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len)
+{
+	u16 filepathlength;
+	int i, desclength = 0;
+
+	/* Either "Boot" or "Driver" followed by four digits of hex */
+	for (i = match; i < match+4; i++) {
+		if (hex_to_bin(var->VariableName[i] & 0xff) < 0)
+			return true;
+	}
+
+	/* A valid entry must be at least 6 bytes */
+	if (len < 6)
+		return false;
+
+	filepathlength = buffer[4] | buffer[5] << 8;
+
+	/*
+	 * There's no stored length for the description, so it has to be
+	 * found by hand
+	 */
+	desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2;
+
+	/* Each boot entry must have a descriptor */
+	if (!desclength)
+		return false;
+
+	/*
+	 * If the sum of the length of the description, the claimed filepath
+	 * length and the original header are greater than the length of the
+	 * variable, it's malformed
+	 */
+	if ((desclength + filepathlength + 6) > len)
+		return false;
+
+	/*
+	 * And, finally, check the filepath
+	 */
+	return validate_device_path(var, match, buffer + desclength + 6,
+				    filepathlength);
+}
+
+static bool
+validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len)
+{
+	/* A single 16-bit integer */
+	if (len != 2)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (buffer[i] > 127)
+			return false;
+
+		if (buffer[i] == 0)
+			return true;
+	}
+
+	return false;
+}
+
+struct variable_validate {
+	char *name;
+	bool (*validate)(struct efi_variable *var, int match, u8 *data,
+			 int len);
+};
+
+static const struct variable_validate variable_validate[] = {
+	{ "BootNext", validate_uint16 },
+	{ "BootOrder", validate_boot_order },
+	{ "DriverOrder", validate_boot_order },
+	{ "Boot*", validate_load_option },
+	{ "Driver*", validate_load_option },
+	{ "ConIn", validate_device_path },
+	{ "ConInDev", validate_device_path },
+	{ "ConOut", validate_device_path },
+	{ "ConOutDev", validate_device_path },
+	{ "ErrOut", validate_device_path },
+	{ "ErrOutDev", validate_device_path },
+	{ "Timeout", validate_uint16 },
+	{ "Lang", validate_ascii_string },
+	{ "PlatformLang", validate_ascii_string },
+	{ "", NULL },
+};
+
+static bool
+validate_var(struct efi_variable *var, u8 *data, int len)
+{
+	int i;
+	u16 *unicode_name = var->VariableName;
+
+	for (i = 0; variable_validate[i].validate != NULL; i++) {
+		const char *name = variable_validate[i].name;
+		int match;
+
+		for (match = 0; ; match++) {
+			char c = name[match];
+			u16 u = unicode_name[match];
+
+			/* All special variables are plain ascii */
+			if (u > 127)
+				return true;
+
+			/* Wildcard in the matching name means we've matched */
+			if (c == '*')
+				return variable_validate[i].validate(var,
+							     match, data, len);
+
+			/* Case sensitive match */
+			if (c != u)
+				break;
+
+			/* Reached the end of the string while matching */
+			if (!c)
+				return variable_validate[i].validate(var,
+							     match, data, len);
+		}
+	}
+
+	return true;
+}
+
 static efi_status_t
 get_var_data(struct efivars *efivars, struct efi_variable *var)
 {
@@ -289,6 +459,12 @@ efivar_store_raw(struct efivar_entry *en
 		return -EINVAL;
 	}
 
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
 	spin_lock(&efivars->lock);
 	status = efivars->ops->set_variable(new_var->VariableName,
 					    &new_var->VendorGuid,
@@ -414,6 +590,12 @@ static ssize_t efivar_create(struct file
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
+	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    validate_var(new_var, new_var->Data, new_var->DataSize) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
 	spin_lock(&efivars->lock);
 
 	/*
author maintainer
#39 lore raw

PATCH 37/47 efivars: Improve variable validation

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <[email protected]>

commit 54b3a4d311c98ad94b737802a8b5f2c8c6bfd627 upstream.

Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions.

---
 drivers/firmware/efivars.c |   46 +++++++++++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 16 deletions(-)
drivers/firmware/efivars.c +30 -16
@@ -167,18 +167,21 @@ utf16_strsize(efi_char16_t *data, unsign
 }
 
 static bool
-validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len)
+validate_device_path(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
 {
 	struct efi_generic_dev_path *node;
 	int offset = 0;
 
 	node = (struct efi_generic_dev_path *)buffer;
 
-	while (offset < len) {
-		offset += node->length;
+	if (len < sizeof(*node))
+		return false;
 
-		if (offset > len)
-			return false;
+	while (offset <= len - sizeof(*node) &&
+	       node->length >= sizeof(*node) &&
+		node->length <= len - offset) {
+		offset += node->length;
 
 		if ((node->type == EFI_DEV_END_PATH ||
 		     node->type == EFI_DEV_END_PATH2) &&
@@ -197,7 +200,8 @@ validate_device_path(struct efi_variable
 }
 
 static bool
-validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len)
+validate_boot_order(struct efi_variable *var, int match, u8 *buffer,
+		    unsigned long len)
 {
 	/* An array of 16-bit integers */
 	if ((len % 2) != 0)
@@ -207,19 +211,27 @@ validate_boot_order(struct efi_variable
 }
 
 static bool
-validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len)
+validate_load_option(struct efi_variable *var, int match, u8 *buffer,
+		     unsigned long len)
 {
 	u16 filepathlength;
-	int i, desclength = 0;
+	int i, desclength = 0, namelen;
+
+	namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName));
 
 	/* Either "Boot" or "Driver" followed by four digits of hex */
 	for (i = match; i < match+4; i++) {
-		if (hex_to_bin(var->VariableName[i] & 0xff) < 0)
+		if (var->VariableName[i] > 127 ||
+		    hex_to_bin(var->VariableName[i] & 0xff) < 0)
 			return true;
 	}
 
-	/* A valid entry must be at least 6 bytes */
-	if (len < 6)
+	/* Reject it if there's 4 digits of hex and then further content */
+	if (namelen > match + 4)
+		return false;
+
+	/* A valid entry must be at least 8 bytes */
+	if (len < 8)
 		return false;
 
 	filepathlength = buffer[4] | buffer[5] << 8;
@@ -228,7 +240,7 @@ validate_load_option(struct efi_variable
 	 * There's no stored length for the description, so it has to be
 	 * found by hand
 	 */
-	desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2;
+	desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
 
 	/* Each boot entry must have a descriptor */
 	if (!desclength)
@@ -250,7 +262,8 @@ validate_load_option(struct efi_variable
 }
 
 static bool
-validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len)
+validate_uint16(struct efi_variable *var, int match, u8 *buffer,
+		unsigned long len)
 {
 	/* A single 16-bit integer */
 	if (len != 2)
@@ -260,7 +273,8 @@ validate_uint16(struct efi_variable *var
 }
 
 static bool
-validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len)
+validate_ascii_string(struct efi_variable *var, int match, u8 *buffer,
+		      unsigned long len)
 {
 	int i;
 
@@ -278,7 +292,7 @@ validate_ascii_string(struct efi_variabl
 struct variable_validate {
 	char *name;
 	bool (*validate)(struct efi_variable *var, int match, u8 *data,
-			 int len);
+			 unsigned long len);
 };
 
 static const struct variable_validate variable_validate[] = {
@@ -300,7 +314,7 @@ static const struct variable_validate va
 };
 
 static bool
-validate_var(struct efi_variable *var, u8 *data, int len)
+validate_var(struct efi_variable *var, u8 *data, unsigned long len)
 {
 	int i;
 	u16 *unicode_name = var->VariableName;
author maintainer
#40 lore raw

PATCH 38/47 hwmon: (coretemp) Increase CPU core limit

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <[email protected]>

commit bdc71c9a87b898e4c380c23b2e3e18071312ecde upstream.

CPU core ID is used to index the core_data[] array. The core ID is, however, not sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to 32 to be able to deal with current CPUs.

---
 drivers/hwmon/coretemp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/coretemp.c +1 -1
@@ -42,7 +42,7 @@
 #define DRVNAME	"coretemp"
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
-#define NUM_REAL_CORES		16	/* Number of Real cores per cpu */
+#define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
 #define MAX_ATTRS		5	/* Maximum no of per-core attrs */
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
author maintainer
#41 lore raw

PATCH 39/47 hwmon: (coretemp) fix oops on cpu unplug

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <[email protected]>

commit b704871124b477807966f06789c2b32f2de58bf7 upstream.

coretemp tries to access core_data array beyond bounds on cpu unplug if core id of the cpu if more than NUM_REAL_CORES-1.

BUG: unable to handle kernel NULL pointer dereference at 000000000000013c
IP: [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
PGD 673e5a067 PUD 66e9b3067 PMD 0
Oops: 0000 [#1] SMP
CPU 79
Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile]

Pid: 3315, comm: set-cpus Tainted: G W 3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R

RIP: 0010:[<ffffffffa00159af>]  [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
RSP: 0018:ffff880472fb3d48  EFLAGS: 00010246
RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246
RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001
R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800
R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000
FS:  00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000)
Stack:
 ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005
 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14
 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034
Call Trace:
 [<ffffffff8161f48d>] notifier_call_chain+0x4d/0x70
 [<ffffffff8107f1be>] __raw_notifier_call_chain+0xe/0x10
 [<ffffffff81059d30>] __cpu_notify+0x20/0x40
 [<ffffffff815fa251>] _cpu_down+0x81/0x270
 [<ffffffff815fa477>] cpu_down+0x37/0x50
 [<ffffffff815fd6a3>] store_online+0x63/0xc0
 [<ffffffff813c7078>] dev_attr_store+0x18/0x30
 [<ffffffff811f02cf>] sysfs_write_file+0xef/0x170
 [<ffffffff81180443>] vfs_write+0xb3/0x180
 [<ffffffff8118076a>] sys_write+0x4a/0x90
 [<ffffffff816236a9>] system_call_fastpath+0x16/0x1b
Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28
RIP  [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp]
 RSP <ffff880472fb3d48>

CR2: 000000000000013c

---
 drivers/hwmon/coretemp.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/hwmon/coretemp.c +4 -0
@@ -752,6 +752,10 @@ static void __cpuinit put_core_offline(u
 
 	indx = TO_ATTR_NO(cpu);
 
+	/* The core id is too big, just return */
+	if (indx > MAX_CORE_DATA - 1)
+		return;
+
 	if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu)
 		coretemp_remove_core(pdata, &pdev->dev, indx);
 
author maintainer
#42 lore raw

PATCH 40/47 libata: skip old error history when counting probe trials

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lin Ming <[email protected]>

commit 6868225e3e92399068be9a5f1635752d91012ad5 upstream.

Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared.

But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps.

Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb().

---
 drivers/ata/libata-eh.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/ata/libata-eh.c +2 -1
@@ -3487,7 +3487,8 @@ static int ata_count_probe_trials_cb(str
 	u64 now = get_jiffies_64();
 	int *trials = void_arg;
 
-	if (ent->timestamp < now - min(now, interval))
+	if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
+	    (ent->timestamp < now - min(now, interval)))
 		return -1;
 
 	(*trials)++;
author maintainer
#43 lore raw

PATCH 41/47 i2c: pnx: Disable clk in suspend

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Stigge <[email protected]>

commit 6c557cfee08751d22aed34840f389b846f0f4508 upstream.

In the driver's suspend function, clk_enable() was used instead of clk_disable(). This is corrected with this patch.

---
 drivers/i2c/busses/i2c-pnx.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/i2c/busses/i2c-pnx.c +1 -2
@@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(st
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
-	/* FIXME: shouldn't this be clk_disable? */
-	clk_enable(alg_data->clk);
+	clk_disable(alg_data->clk);
 
 	return 0;
 }
author maintainer
#44 lore raw

PATCH 42/47 ipw2200: Fix race condition in the command completion acknowledge

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stanislav Yakovlev <[email protected]>

commit dd447319895d0c0af423e483d9b63f84f3f8869a upstream.

Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log:

Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command.

After that you need to reload the driver to get it working again.

This bug occurs during roaming (reported by Sam Varshavchik)
https://bugzilla.redhat.com/show_bug.cgi?id=738508
and machine booting (reported by Tom Gundersen and Mads Kiilerich)
https://bugs.archlinux.org/task/28097
https://bugzilla.redhat.com/show_bug.cgi?id=802106

This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot.

---
 drivers/net/wireless/ipw2x00/ipw2200.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/net/wireless/ipw2x00/ipw2200.c +12 -1
@@ -2182,6 +2182,7 @@ static int __ipw_send_cmd(struct ipw_pri
 {
 	int rc = 0;
 	unsigned long flags;
+	unsigned long now, end;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->status & STATUS_HCMD_ACTIVE) {
@@ -2223,10 +2224,20 @@ static int __ipw_send_cmd(struct ipw_pri
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	now = jiffies;
+	end = now + HOST_COMPLETE_TIMEOUT;
+again:
 	rc = wait_event_interruptible_timeout(priv->wait_command_queue,
 					      !(priv->
 						status & STATUS_HCMD_ACTIVE),
-					      HOST_COMPLETE_TIMEOUT);
+					      end - now);
+	if (rc < 0) {
+		now = jiffies;
+		if (time_before(now, end))
+			goto again;
+		rc = 0;
+	}
+
 	if (rc == 0) {
 		spin_lock_irqsave(&priv->lock, flags);
 		if (priv->status & STATUS_HCMD_ACTIVE) {
author maintainer
#45 lore raw

PATCH 43/47 mac80211: fix AP mode EAP tx for VLAN stations

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

commit 66f2c99af3d6f2d0aa1120884cf1c60613ef61c0 upstream.

EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations.
For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets.
Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place.

---
 net/mac80211/tx.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/mac80211/tx.c +2 -1
@@ -1222,7 +1222,8 @@ ieee80211_tx_prepare(struct ieee80211_su
 		tx->sta = rcu_dereference(sdata->u.vlan.sta);
 		if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr)
 			return TX_DROP;
-	} else if (info->flags & IEEE80211_TX_CTL_INJECTED) {
+	} else if (info->flags & IEEE80211_TX_CTL_INJECTED ||
+		   tx->sdata->control_port_protocol == tx->skb->protocol) {
 		tx->sta = sta_info_get_bss(sdata, hdr->addr1);
 	}
 	if (!tx->sta)
author maintainer
#46 lore raw

PATCH 44/47 rtlwifi: Fix oops on unload

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larry Finger <[email protected]>

commit 44eb65cfd8da4b9c231238998729e858e963a980 upstream.

Under some circumstances, a PCI-based driver reports the following OOPs:

Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP
--snip--
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod
Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP:
0010:[<ffffffffa0418d39>]  [<ffffffffa0418d39>]
rtl92ce_get_desc+0x19/0xd0 [rtl8192ce]
--snip--
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid:
19627, threadinfo ffff880050262000, task ffff8801156d5cc0)
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack:
Mar 19 08:14:35 kvothe kernel: [ 6584.626011]  0000000000000002
ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7
Mar 19 08:14:35 kvothe kernel: [ 6584.626011]  0000000000000282
0000000180150014 ffff880050263fd8 ffff8801176c2810
Mar 19 08:14:35 kvothe kernel: [ 6584.626011]  ffff880050263bc8
ffffffff810550e2 00000000000002c0 ffff8801176c0d40
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace:
Mar 19 08:14:35 kvothe kernel: [ 6584.626011]  [<ffffffffa03348e7>]
_rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi]
--snip--
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48
83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66
66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1
e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP
[<ffffffffa0418d39>] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce]
Mar 19 08:14:35 kvothe kernel: [ 6584.626011]  RSP <ffff880050263b58>
Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0
Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace

8636c766dcfbe0e6 ]---

This oops is due to interrupts not being disabled in this particular path.

---
 drivers/net/wireless/rtlwifi/pci.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/rtlwifi/pci.c +1 -0
@@ -1988,6 +1988,7 @@ void rtl_pci_disconnect(struct pci_dev *
 		rtl_deinit_deferred_work(hw);
 		rtlpriv->intf_ops->adapter_stop(hw);
 	}
+	rtlpriv->cfg->ops->disable_interrupt(hw);
 
 	/*deinit rfkill */
 	rtl_deinit_rfkill(hw);
author maintainer
#47 lore raw

PATCH 45/47 wl1251: fix crash on remove due to premature kfree

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <[email protected]>

commit 328c32f0f85467af5a6c4c3289e168d9ad2555af upstream.

Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access.

Fix this by freeing glue data last.

---
 drivers/net/wireless/wl1251/sdio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/wl1251/sdio.c +1 -1
@@ -314,8 +314,8 @@ static void __devexit wl1251_sdio_remove
 
 	if (wl->irq)
 		free_irq(wl->irq, wl);
-	kfree(wl_sdio);
 	wl1251_free_hw(wl);
+	kfree(wl_sdio);
 
 	sdio_claim_host(func);
 	sdio_release_irq(func);
author maintainer
#48 lore raw

PATCH 46/47 wl1251: fix crash on remove due to leftover work item

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <[email protected]>

commit 4c1bcdb5a3354b250b82a67549f57ac27a3bb85f upstream.

This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work.

---
 drivers/net/wireless/wl1251/main.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/wl1251/main.c +1 -0
@@ -479,6 +479,7 @@ static void wl1251_op_stop(struct ieee80
 	cancel_work_sync(&wl->irq_work);
 	cancel_work_sync(&wl->tx_work);
 	cancel_work_sync(&wl->filter_work);
+	cancel_delayed_work_sync(&wl->elp_work);
 
 	mutex_lock(&wl->mutex);
 
author maintainer
#49 lore raw

PATCH 47/47 sched: Fix nohz load accounting -- again!

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit c308b56b5398779cd3da0f62ab26b0453494c3d4 upstream. [ backported to 3.0 by Kerin Millar <[email protected]>]

Various people reported nohz load tracking still being wrecked, but Doug spotted the actual problem. We fold the nohz remainder in too soon, causing us to loose samples and under-account.

So instead of playing catch-up up-front, always do a single load-fold with whatever state we encounter and only then fold the nohz remainder and play catch-up.

---
 kernel/sched.c |   53 ++++++++++++++++++++++++++---------------------------
 1 file changed, 26 insertions(+), 27 deletions(-)
kernel/sched.c +26 -27
@@ -3392,13 +3392,10 @@ calc_load_n(unsigned long load, unsigned
  * Once we've updated the global active value, we need to apply the exponential
  * weights adjusted to the number of cycles missed.
  */
-static void calc_global_nohz(unsigned long ticks)
+static void calc_global_nohz(void)
 {
 	long delta, active, n;
 
-	if (time_before(jiffies, calc_load_update))
-		return;
-
 	/*
 	 * If we crossed a calc_load_update boundary, make sure to fold
 	 * any pending idle changes, the respective CPUs might have
@@ -3410,31 +3407,25 @@ static void calc_global_nohz(unsigned lo
 		atomic_long_add(delta, &calc_load_tasks);
 
 	/*
-	 * If we were idle for multiple load cycles, apply them.
+	 * It could be the one fold was all it took, we done!
 	 */
-	if (ticks >= LOAD_FREQ) {
-		n = ticks / LOAD_FREQ;
+	if (time_before(jiffies, calc_load_update + 10))
+		return;
 
-		active = atomic_long_read(&calc_load_tasks);
-		active = active > 0 ? active * FIXED_1 : 0;
+	/*
+	 * Catch-up, fold however many we are behind still
+	 */
+	delta = jiffies - calc_load_update - 10;
+	n = 1 + (delta / LOAD_FREQ);
 
-		avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
-		avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
-		avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+	active = atomic_long_read(&calc_load_tasks);
+	active = active > 0 ? active * FIXED_1 : 0;
 
-		calc_load_update += n * LOAD_FREQ;
-	}
+	avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+	avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+	avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
 
-	/*
-	 * Its possible the remainder of the above division also crosses
-	 * a LOAD_FREQ period, the regular check in calc_global_load()
-	 * which comes after this will take care of that.
-	 *
-	 * Consider us being 11 ticks before a cycle completion, and us
-	 * sleeping for 4*LOAD_FREQ + 22 ticks, then the above code will
-	 * age us 4 cycles, and the test in calc_global_load() will
-	 * pick up the final one.
-	 */
+	calc_load_update += n * LOAD_FREQ;
 }
 #else
 static void calc_load_account_idle(struct rq *this_rq)
@@ -3446,7 +3437,7 @@ static inline long calc_load_fold_idle(v
 	return 0;
 }
 
-static void calc_global_nohz(unsigned long ticks)
+static void calc_global_nohz(void)
 {
 }
 #endif
@@ -3474,8 +3465,6 @@ void calc_global_load(unsigned long tick
 {
 	long active;
 
-	calc_global_nohz(ticks);
-
 	if (time_before(jiffies, calc_load_update + 10))
 		return;
 
@@ -3487,6 +3476,16 @@ void calc_global_load(unsigned long tick
 	avenrun[2] = calc_load(avenrun[2], EXP_15, active);
 
 	calc_load_update += LOAD_FREQ;
+
+	/*
+	 * Account one period with whatever state we found before
+	 * folding in the nohz state and ageing the entire idle period.
+	 *
+	 * This avoids loosing a sample when we go idle between
+	 * calc_load_account_active() (10 ticks ago) and now and thus
+	 * under-accounting.
+	 */
+	calc_global_nohz();
 }
 
 /*