Skip to contentSkip to conversation

Fix pango modules load failure in multilib environment, Edwin, May2, 2012

PATCH Applied [email protected] 4 participants 7 messages May 2, 2012 – May 7, 2012

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Fix pango modules load failure in multilib environment, Edwin, May2, 2012

From: Zhai Edwin <[email protected]>

This patch fix the modules load failure when multi-libs of pango co-exist in system.

[YOCTO #2356] got fixed.

Thanks,
Edwin

The following changes since commit 2c3d4f5beee8f57a74244495511b9294df1085ea:

documentation/bsp-guide/bsp.xml: spelling corrected. (2012-04-18 16:42:15 +0100)

are available in the git repository at:
git://git.pokylinux.org/poky-contrib gzhai/fix2
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=gzhai/fix2

Zhai Edwin (1):
pango: Fix modules load failure in multilib environment

 .../pango/pango-1.28.4/multilib-fix.patch          |   90 ++++++++++++++++++++
 meta/recipes-graphics/pango/pango.inc              |   12 ++-
 meta/recipes-graphics/pango/pango_1.28.4.bb        |    7 +-
 3 files changed, 101 insertions(+), 8 deletions(-)
 create mode 100644 meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch
#1 lore raw

PATCH 1/1 pango: Fix modules load failure in multilib environment

From: Zhai Edwin <[email protected]>

Multi-libs of Pango need different modules, thus different config files and utils. This patch separate config file and utils into different directory to avoid conflict.

[YOCTO #2356] got fixed.

---
 .../pango/pango-1.28.4/multilib-fix.patch          |   90 ++++++++++++++++++++
 meta/recipes-graphics/pango/pango.inc              |   12 ++-
 meta/recipes-graphics/pango/pango_1.28.4.bb        |    7 +-
 3 files changed, 101 insertions(+), 8 deletions(-)
 create mode 100644 meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch
meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch new file +90 -0
new file mode 100644
index 0000000..87d7a0a
@@ -0,0 +1,90 @@
+Fix modules load failure in multilib environment.
+
+Multi-lib need different configs produced by different utils, so need keep both
+of them by putting them in different directory.
+
+Signed-off-by: Zhai Edwin <[email protected]>
+
+Upstream-Status: Inappropriate [other] - Upstream may have nice fix in future
+
+Index: pango-1.28.4/pango/pango-utils.c
+===================================================================
+--- pango-1.28.4.orig/pango/pango-utils.c	2012-04-28 16:23:48.000000000 +0800
++++ pango-1.28.4/pango/pango-utils.c	2012-05-02 10:19:14.000000000 +0800
+@@ -678,6 +678,19 @@
+ 
+ #endif
+ 
++#ifndef G_OS_WIN32
++/* return the relative baselib dir */
++const char *
++pango_get_baselib_directory (void)
++{
++  char *libdir = g_strdup(LIBDIR);
++  char *baselib = g_strdup( g_strrstr(libdir, "lib"));
++  g_free(libdir);
++
++  return baselib;
++}
++#endif
++
+ /**
+  * pango_get_sysconf_subdirectory:
+  *
+Index: pango-1.28.4/pango/modules.c
+===================================================================
+--- pango-1.28.4.orig/pango/modules.c	2010-09-22 03:37:01.000000000 +0800
++++ pango-1.28.4/pango/modules.c	2012-05-02 10:42:57.000000000 +0800
+@@ -523,12 +523,17 @@
+ 
+   char *file_str =  pango_config_key_get ("Pango/ModuleFiles");
+   char **files;
++  char *baselib = pango_get_baselib_directory();
+   int n;
+ 
+   dlloaded_modules = g_hash_table_new (g_str_hash, g_str_equal);
+ 
+   if (!file_str)
+     file_str = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++				 baselib,
++#endif
+ 				 "pango.modules",
+ 				 NULL);
+ 
+@@ -550,6 +555,7 @@
+ 
+   g_strfreev (files);
+   g_free (file_str);
++  g_free (baselib);
+ 
+   dlloaded_engines = g_slist_reverse (dlloaded_engines);
+ }
+@@ -631,6 +637,7 @@
+ {
+   const char *engine_type = g_quark_to_string (info->engine_type_id);
+   const char *render_type = g_quark_to_string (info->render_type_id);
++  char *baselib = pango_get_baselib_directory();
+ 
+   init_modules();
+ 
+@@ -640,6 +647,10 @@
+       if (!no_module_warning)
+ 	{
+ 	  gchar *filename = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++					      baselib,
++#endif
+ 					      "pango.modules",
+ 					      NULL);
+ 	  g_critical ("No modules found:\n"
+@@ -652,6 +663,7 @@
+ 		     filename,
+ 		     filename);
+ 	  g_free (filename);
++	  g_free (baselib);
+ 
+ 	  no_module_warning = TRUE;
+ 	}
meta/recipes-graphics/pango/pango.inc +7 -5
index a2d5dc3..2184da3 100644
@@ -32,9 +32,11 @@ EXTRA_AUTORECONF = ""
 # seems to go wrong with default cflags
 FULL_OPTIMIZATION_arm = "-O2"
 
+# keep multiple version of utils under ${bindir} in multilib environment
 EXTRA_OECONF = "--disable-glibtest \
 		--enable-explicit-deps=no \
-	        --disable-debug"
+	        --disable-debug \
+	        --bindir=${bindir}/${baselib}"
 
 LEAD_SONAME = "libpango-1.0*"
 LIBV = "1.6.0"
@@ -44,8 +46,8 @@ if [ "x$D" != "x" ]; then
   exit 1
 fi
 
-if ! [ -e $D${sysconfdir}/pango ] ; then
-	mkdir -p $D${sysconfdir}/pango
+if ! [ -e $D${sysconfdir}/pango/${baselib} ] ; then
+	mkdir -p $D${sysconfdir}/pango/${baselib}
 fi
 }
 
@@ -54,9 +56,9 @@ python populate_packages_prepend () {
 
 	modules_root = d.expand('${libdir}/pango/${LIBV}/modules')
 
-	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules > /etc/pango/pango.modules')
+	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + '${bindir}/${baselib}/pango-querymodules > /etc/pango/${baselib}/pango.modules')
 }
 
-FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/* ${libdir}/libpango*${SOLIBS}"
+FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/${baselib}/* ${libdir}/libpango*${SOLIBS}"
 FILES_${PN}-dbg += "${libdir}/pango/${LIBV}/modules/.debug"
 FILES_${PN}-dev += "${libdir}/pango/${LIBV}/modules/*.la"
meta/recipes-graphics/pango/pango_1.28.4.bb +4 -3
index 8d71de0..e72e8a2 100644
@@ -2,10 +2,11 @@ require pango.inc
 
 LIC_FILES_CHKSUM = "file://COPYING;md5=3bf50002aefd002f49e7bb854063f7e7"
 
-PR = "r7"
+PR = "r8"
 
-SRC_URI += "file://no-tests.patch"
-SRC_URI += "file://noconst.patch"
+SRC_URI += "file://no-tests.patch \
+            file://noconst.patch \
+            file://multilib-fix.patch"
 
 SRC_URI[archive.md5sum] = "3f3989700f04e9117d30544a9078b3a0"
 SRC_URI[archive.sha256sum] = "7eb035bcc10dd01569a214d5e2bc3437de95d9ac1cfa9f50035a687c45f05a9f"
Signature · 1 line
1.7.1
Applied
#2 lore raw

Re: [poky] [PATCH 1/1] pango: Fix modules load failure in multilib environment

Quoted 9 lines · On 05/02/2012 12:43 AM, [email protected] wrote:

From: Zhai Edwin<[email protected]>

Multi-libs of Pango need different modules, thus different config files and utils. This patch separate config file and utils into different directory to avoid conflict.

[YOCTO #2356] got fixed.

This wasn't poky-specific, so I am replying to the oe-core ML.

Merged to denzil-next, thanks!

http://git.openembedded.org/openembedded-core-contrib/log/?h=sgarman/denzil-next

Scott

Signature · 3 lines
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
#3 lore raw

Re: [PATCH 1/1] pango: Fix modules load failure in multilib environment

In reply to [email protected]
Quoted 141 lines · On 05/02/2012 12:43 AM, [email protected] wrote:

From: Zhai Edwin<[email protected]>

Multi-libs of Pango need different modules, thus different config files and utils. This patch separate config file and utils into different directory to avoid conflict.

[YOCTO #2356] got fixed.

---
  .../pango/pango-1.28.4/multilib-fix.patch          |   90 ++++++++++++++++++++
  meta/recipes-graphics/pango/pango.inc              |   12 ++-
  meta/recipes-graphics/pango/pango_1.28.4.bb        |    7 +-
  3 files changed, 101 insertions(+), 8 deletions(-)

create mode 100644 meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch

meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch new file +90 -0
new file mode 100644
index 0000000..87d7a0a
@@ -0,0 +1,90 @@
+Fix modules load failure in multilib environment.
+
+Multi-lib need different configs produced by different utils, so need keep both
+of them by putting them in different directory.
+
+Signed-off-by: Zhai Edwin<[email protected]>
+
+Upstream-Status: Inappropriate [other] - Upstream may have nice fix in future
+
+Index: pango-1.28.4/pango/pango-utils.c
+===================================================================
+--- pango-1.28.4.orig/pango/pango-utils.c	2012-04-28 16:23:48.000000000 +0800
++++ pango-1.28.4/pango/pango-utils.c	2012-05-02 10:19:14.000000000 +0800
+@@ -678,6 +678,19 @@
+
+ #endif
+
++#ifndef G_OS_WIN32
++/* return the relative baselib dir */
++const char *
++pango_get_baselib_directory (void)
++{
++  char *libdir = g_strdup(LIBDIR);
++  char *baselib = g_strdup( g_strrstr(libdir, "lib"));
++  g_free(libdir);
++
++  return baselib;
++}
++#endif
++
+ /**
+  * pango_get_sysconf_subdirectory:
+  *
+Index: pango-1.28.4/pango/modules.c
+===================================================================
+--- pango-1.28.4.orig/pango/modules.c	2010-09-22 03:37:01.000000000 +0800
++++ pango-1.28.4/pango/modules.c	2012-05-02 10:42:57.000000000 +0800
+@@ -523,12 +523,17 @@
+
+   char *file_str =  pango_config_key_get ("Pango/ModuleFiles");
+   char **files;
++  char *baselib = pango_get_baselib_directory();
+   int n;
+
+   dlloaded_modules = g_hash_table_new (g_str_hash, g_str_equal);
+
+   if (!file_str)
+     file_str = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++				 baselib,
++#endif
+ 				 "pango.modules",
+ 				 NULL);
+
+@@ -550,6 +555,7 @@
+
+   g_strfreev (files);
+   g_free (file_str);
++  g_free (baselib);
+
+   dlloaded_engines = g_slist_reverse (dlloaded_engines);
+ }
+@@ -631,6 +637,7 @@
+ {
+   const char *engine_type = g_quark_to_string (info->engine_type_id);
+   const char *render_type = g_quark_to_string (info->render_type_id);
++  char *baselib = pango_get_baselib_directory();
+
+   init_modules();
+
+@@ -640,6 +647,10 @@
+       if (!no_module_warning)
+ 	{
+ 	  gchar *filename = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++					      baselib,
++#endif
+ 					      "pango.modules",
+ 					      NULL);
+ 	  g_critical ("No modules found:\n"
+@@ -652,6 +663,7 @@
+ 		     filename,
+ 		     filename);
+ 	  g_free (filename);
++	  g_free (baselib);
+
+ 	  no_module_warning = TRUE;
+ 	}
meta/recipes-graphics/pango/pango.inc +5 -3
index a2d5dc3..2184da3 100644
@@ -32,9 +32,11 @@ EXTRA_AUTORECONF = ""
  # seems to go wrong with default cflags
  FULL_OPTIMIZATION_arm = "-O2"
 
+# keep multiple version of utils under ${bindir} in multilib environment
  EXTRA_OECONF = "--disable-glibtest \
  		--enable-explicit-deps=no \
-	        --disable-debug"
+	        --disable-debug \
+	        --bindir=${bindir}/${baselib}"
 
  LEAD_SONAME = "libpango-1.0*"
  LIBV = "1.6.0"
@@ -44,8 +46,8 @@ if [ "x$D" != "x" ]; then
    exit 1
  fi
 
-if ! [ -e $D${sysconfdir}/pango ] ; then
-	mkdir -p $D${sysconfdir}/pango
+if ! [ -e $D${sysconfdir}/pango/${baselib} ] ; then
+	mkdir -p $D${sysconfdir}/pango/${baselib}
  fi
  }
 

meta/recipes-graphics/pango/pango.inc python populate_packages_prepend () { · line 62

Quoted 9 lines
meta/recipes-graphics/pango/pango.inc +2 -2
@@ -54,9 +56,9 @@ python populate_packages_prepend () {
 
  	modules_root = d.expand('${libdir}/pango/${LIBV}/modules')
 
-	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules>  /etc/pango/pango.modules')
+	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + '${bindir}/${baselib}/pango-querymodules>  /etc/pango/${baselib}/pango.modules')
  }
 
-FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/* ${libdir}/libpango*${SOLIBS}"
+FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/${baselib}/* ${libdir}/libpango*${SOLIBS}"

This change to ${bindir}/${baselib} does not seem right to me, that would be /usr/bin/usr/lib.

It also results in a packaging issue:

ERROR: For recipe pango, the following files/directories were installed but not shipped in any package:
ERROR:   /usr/bin/lib/.debug
ERROR:   /usr/bin/lib/.debug/pango-querymodules
ERROR:   /usr/bin/lib/.debug/pango-view

Please review this patch

Thanks
Sau!

Quoted 21 lines
meta/recipes-graphics/pango/pango.inc +0 -0
  FILES_${PN}-dbg += "${libdir}/pango/${LIBV}/modules/.debug"
  FILES_${PN}-dev += "${libdir}/pango/${LIBV}/modules/*.la"
meta/recipes-graphics/pango/pango_1.28.4.bb +4 -3
index 8d71de0..e72e8a2 100644
@@ -2,10 +2,11 @@ require pango.inc
 
  LIC_FILES_CHKSUM = "file://COPYING;md5=3bf50002aefd002f49e7bb854063f7e7"
 
-PR = "r7"
+PR = "r8"
 
-SRC_URI += "file://no-tests.patch"
-SRC_URI += "file://noconst.patch"
+SRC_URI += "file://no-tests.patch \
+            file://noconst.patch \
+            file://multilib-fix.patch"
 
  SRC_URI[archive.md5sum] = "3f3989700f04e9117d30544a9078b3a0"
  SRC_URI[archive.sha256sum] = "7eb035bcc10dd01569a214d5e2bc3437de95d9ac1cfa9f50035a687c45f05a9f"
#4 lore raw

Re: [PATCH 1/1] pango: Fix modules load failure in multilib environment

Quoted 149 lines · Saul Wold
Quoted 148 lines · On 05/02/2012 12:43 AM, [email protected] wrote:

From: Zhai Edwin<[email protected]>

Multi-libs of Pango need different modules, thus different config files and utils. This patch separate config file and utils into different directory to avoid conflict.

[YOCTO #2356] got fixed.

---
  .../pango/pango-1.28.4/multilib-fix.patch          |   90 ++++++++++++++++++++
  meta/recipes-graphics/pango/pango.inc              |   12 ++-
  meta/recipes-graphics/pango/pango_1.28.4.bb        |    7 +-
  3 files changed, 101 insertions(+), 8 deletions(-)

create mode 100644 meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch

meta/recipes-graphics/pango/pango-1.28.4/multilib-fix.patch new file +90 -0
new file mode 100644
index 0000000..87d7a0a
@@ -0,0 +1,90 @@
+Fix modules load failure in multilib environment.
+
+Multi-lib need different configs produced by different utils, so need keep both
+of them by putting them in different directory.
+
+Signed-off-by: Zhai Edwin<[email protected]>
+
+Upstream-Status: Inappropriate [other] - Upstream may have nice fix in future
+
+Index: pango-1.28.4/pango/pango-utils.c
+===================================================================
+--- pango-1.28.4.orig/pango/pango-utils.c	2012-04-28 16:23:48.000000000 +0800
++++ pango-1.28.4/pango/pango-utils.c	2012-05-02 10:19:14.000000000 +0800
+@@ -678,6 +678,19 @@
+
+ #endif
+
++#ifndef G_OS_WIN32
++/* return the relative baselib dir */
++const char *
++pango_get_baselib_directory (void)
++{
++  char *libdir = g_strdup(LIBDIR);
++  char *baselib = g_strdup( g_strrstr(libdir, "lib"));
++  g_free(libdir);
++
++  return baselib;
++}
++#endif
++
+ /**
+  * pango_get_sysconf_subdirectory:
+  *
+Index: pango-1.28.4/pango/modules.c
+===================================================================
+--- pango-1.28.4.orig/pango/modules.c	2010-09-22 03:37:01.000000000 +0800
++++ pango-1.28.4/pango/modules.c	2012-05-02 10:42:57.000000000 +0800
+@@ -523,12 +523,17 @@
+
+   char *file_str =  pango_config_key_get ("Pango/ModuleFiles");
+   char **files;
++  char *baselib = pango_get_baselib_directory();
+   int n;
+
+   dlloaded_modules = g_hash_table_new (g_str_hash, g_str_equal);
+
+   if (!file_str)
+     file_str = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++				 baselib,
++#endif
+ 				 "pango.modules",
+ 				 NULL);
+
+@@ -550,6 +555,7 @@
+
+   g_strfreev (files);
+   g_free (file_str);
++  g_free (baselib);
+
+   dlloaded_engines = g_slist_reverse (dlloaded_engines);
+ }
+@@ -631,6 +637,7 @@
+ {
+   const char *engine_type = g_quark_to_string (info->engine_type_id);
+   const char *render_type = g_quark_to_string (info->render_type_id);
++  char *baselib = pango_get_baselib_directory();
+
+   init_modules();
+
+@@ -640,6 +647,10 @@
+       if (!no_module_warning)
+ 	{
+ 	  gchar *filename = g_build_filename (pango_get_sysconf_subdirectory (),
++#ifndef G_OS_WIN32
++/* For multilib case, keep multiple config file for different libs */
++					      baselib,
++#endif
+ 					      "pango.modules",
+ 					      NULL);
+ 	  g_critical ("No modules found:\n"
+@@ -652,6 +663,7 @@
+ 		     filename,
+ 		     filename);
+ 	  g_free (filename);
++	  g_free (baselib);
+
+ 	  no_module_warning = TRUE;
+ 	}
meta/recipes-graphics/pango/pango.inc +6 -4
index a2d5dc3..2184da3 100644
@@ -32,9 +32,11 @@ EXTRA_AUTORECONF = ""
  # seems to go wrong with default cflags
  FULL_OPTIMIZATION_arm = "-O2"
 
+# keep multiple version of utils under ${bindir} in multilib environment
  EXTRA_OECONF = "--disable-glibtest \
  		--enable-explicit-deps=no \
-	        --disable-debug"
+	        --disable-debug \
+	        --bindir=${bindir}/${baselib}"
 
  LEAD_SONAME = "libpango-1.0*"
  LIBV = "1.6.0"
@@ -44,8 +46,8 @@ if [ "x$D" != "x" ]; then
    exit 1
  fi
 
-if ! [ -e $D${sysconfdir}/pango ] ; then
-	mkdir -p $D${sysconfdir}/pango
+if ! [ -e $D${sysconfdir}/pango/${baselib} ] ; then
+	mkdir -p $D${sysconfdir}/pango/${baselib}
  fi
  }
 
@@ -54,9 +56,9 @@ python populate_packages_prepend () {
 
  	modules_root = d.expand('${libdir}/pango/${LIBV}/modules')
 
-	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + 'pango-querymodules>  /etc/pango/pango.modules')
+	do_split_packages(d, modules_root, '^pango-(.*)\.so$', 'pango-module-%s', 'Pango module %s', prologue + '${bindir}/${baselib}/pango-querymodules>  /etc/pango/${baselib}/pango.modules')
  }
 
Quoted 5 lines

meta/recipes-graphics/pango/pango.inc python populate_packages_prepend () { · line 62

Quoted 2 lines
meta/recipes-graphics/pango/pango.inc +1 -1
-FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/* ${libdir}/libpango*${SOLIBS}"
+FILES_${PN} = "${sysconfdir}/pango/* ${bindir}/${baselib}/* ${libdir}/libpango*${SOLIBS}"

This change to ${bindir}/${baselib} does not seem right to me, that would be /usr/bin/usr/lib.

No, it woud be /usr/bin/lib.

Quoted 9 lines

It also results in a packaging issue:
ERROR: For recipe pango, the following files/directories were installed but not shipped in any package:

ERROR:   /usr/bin/lib/.debug
ERROR:   /usr/bin/lib/.debug/pango-querymodules
ERROR:   /usr/bin/lib/.debug/pango-view

Please review this patch

There is a missing FILES_${PN}-dbg += "${bindir}/${baselib}/.debug".

I am left wondering if we would be better doing something like:

do_install_append () {
	if [ "${MLPREFIX}" != "" ]; then
		mv ${bindir}/pango-querymodules ${bindir}/${MLPREFIX}pango-querymodules 
	fi
}

It would also be worth cosidering if the patch would be any neater if we pass ${MLPREFIX} in as an extra variable?

Cheers,

Richard

#5 lore raw

Re: [PATCH 1/1] pango: Fix modules load failure in multilib environment

Quoted 9 lines · Richard Purdie

There is a missing FILES_${PN}-dbg += "${bindir}/${baselib}/.debug".

I am left wondering if we would be better doing something like:

do_install_append () {
	if [ "${MLPREFIX}" != "" ]; then
		mv ${bindir}/pango-querymodules ${bindir}/${MLPREFIX}pango-querymodules
	fi
}

Does it makes others hard to find the util if changing the name?

Quoted 3 lines

It would also be worth cosidering if the patch would be any neater if we pass ${MLPREFIX} in as an extra variable?

Change the pango-querymodules command line to accept an extra parameter to indicate where to query? I can have a check to see if it works.

Regarding the lib, the path is hard coded, so we can't pass ${MLPREFIX} in.

Quoted 4 lines

Cheers,

Richard

#6 lore raw

Re: [PATCH 1/1] pango: Fix modules load failure in multilib environment

Quoted 14 lines · Edwin
Quoted 9 lines · Richard Purdie

There is a missing FILES_${PN}-dbg += "${bindir}/${baselib}/.debug".

I am left wondering if we would be better doing something like:

do_install_append () {
	if [ "${MLPREFIX}" != "" ]; then
		mv ${bindir}/pango-querymodules ${bindir}/${MLPREFIX}pango-querymodules
	fi
}

Does it makes others hard to find the util if changing the name?

Quoted 1 line
Quoted 7 lines
Quoted 2 lines

It would also be worth cosidering if the patch would be any neater if we pass ${MLPREFIX} in as an extra variable?

Change the pango-querymodules command line to accept an extra parameter to indicate where to query? I can have a check to see if it works.

Regarding the lib, the path is hard coded, so we can't pass ${MLPREFIX} in.

Sorry, I meant pass in ${MLPREFIX} as an option to configure so it would be compiled in.

Cheers,

Richard