Skip to contentSkip to conversation

tools: add Haswell registers into intel_reg_dumper

PATCH Applied Eugeni Dodonov 2 participants 2 messages May 8, 2012 Library code

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tools: add Haswell registers into intel_reg_dumper

For now, only print their content for diffing, but also add the necessary bits that can be used for more verbose output in the fugure.

---
 lib/intel_reg.h          |  157 ++++++++++++++++++++++++++++++++++++++++++++++
 tools/intel_reg_dumper.c |   68 ++++++++++++++++++++
 2 files changed, 225 insertions(+)
lib/intel_reg.h +157 -0
index 427efee..a92d26f 100644
@@ -3542,4 +3542,161 @@ typedef enum {
 #define GEN6_RC6pp_THRESHOLD			0xA0C0
 #define GEN6_PMINTRMSK				0xA168
 
+/* Haswell-related items */
+
+/* HSW Power Wells */
+#define HSW_PWR_WELL_CTL1			0x45400		/* BIOS */
+#define HSW_PWR_WELL_CTL2			0x45404		/* Driver */
+#define HSW_PWR_WELL_CTL3			0x45408		/* KVMR */
+#define HSW_PWR_WELL_CTL4			0x4540C		/* Debug */
+#define   HSW_PWR_WELL_ENABLE			(1<<31)
+#define   HSW_PWR_WELL_STATE			(1<<30)
+#define HSW_PWR_WELL_CTL5			0x45410
+#define   HSW_PWR_WELL_ENABLE_SINGLE_STEP	(1<<31)
+#define   HSW_PWR_WELL_PWR_GATE_OVERRIDE	(1<<20)
+#define   HSW_PWR_WELL_FORCE_ON			(1<<19)
+#define HSW_PWR_WELL_CTL6			0x45414
+
+/* Per-pipe DDI Function Control */
+#define PIPE_DDI_FUNC_CTL_A		0x60400
+#define PIPE_DDI_FUNC_CTL_B		0x61400
+#define PIPE_DDI_FUNC_CTL_C		0x62400
+#define PIPE_DDI_FUNC_CTL_EDP		0x6F400
+#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
+					PIPE_DDI_FUNC_CTL_A, \
+					PIPE_DDI_FUNC_CTL_B)
+#define  PIPE_DDI_FUNC_ENABLE		(1<<31)
+/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
+#define  PIPE_DDI_PORT_MASK		(0xf<<28)
+#define  PIPE_DDI_SELECT_PORT(x)	((x)<<28)
+#define  PIPE_DDI_MODE_SELECT_HDMI	(0<<24)
+#define  PIPE_DDI_MODE_SELECT_DVI	(1<<24)
+#define  PIPE_DDI_MODE_SELECT_DP_SST	(2<<24)
+#define  PIPE_DDI_MODE_SELECT_DP_MST	(3<<24)
+#define  PIPE_DDI_MODE_SELECT_FDI	(4<<24)
+#define  PIPE_DDI_BPC_8			(0<<20)
+#define  PIPE_DDI_BPC_10		(1<<20)
+#define  PIPE_DDI_BPC_6			(2<<20)
+#define  PIPE_DDI_BPC_12		(3<<20)
+#define  PIPE_DDI_BFI_ENABLE		(1<<4)
+#define  PIPE_DDI_PORT_WIDTH_X1		(0<<1)
+#define  PIPE_DDI_PORT_WIDTH_X2		(1<<1)
+#define  PIPE_DDI_PORT_WIDTH_X4		(3<<1)
+
+/* DisplayPort Transport Control */
+#define DP_TP_CTL_A				0x64040
+#define DP_TP_CTL_B				0x64140
+#define DP_TP_CTL_C				0x64240
+#define DP_TP_CTL_D				0x64340
+#define DP_TP_CTL_E				0x64440
+#define  DP_TP_CTL_ENABLE			(1<<31)
+#define  DP_TP_CTL_MODE_SST			(0<<27)
+#define  DP_TP_CTL_MODE_MST			(1<<27)
+#define  DP_TP_CTL_ENHANCED_FRAME_ENABLE	(1<<18)
+#define  DP_TP_CTL_FDI_AUTOTRAIN		(1<<15)
+#define  DP_TP_CTL_LINK_TRAIN_MASK		(7<<8)
+#define  DP_TP_CTL_LINK_TRAIN_PAT1		(0<<8)
+#define  DP_TP_CTL_LINK_TRAIN_PAT2		(1<<8)
+#define  DP_TP_CTL_LINK_TRAIN_NORMAL		(3<<8)
+
+/* DisplayPort Transport Status */
+#define DP_TP_STATUS_A			0x64044
+#define DP_TP_STATUS_B			0x64144
+#define DP_TP_STATUS_C			0x64244
+#define DP_TP_STATUS_D			0x64344
+#define DP_TP_STATUS_E			0x64444
+#define  DP_TP_STATUS_AUTOTRAIN_DONE	(1<<12)
+
+/* DDI Buffer Control */
+#define DDI_BUF_CTL_A			0x64000
+#define DDI_BUF_CTL_B			0x64100
+#define DDI_BUF_CTL_C			0x64200
+#define DDI_BUF_CTL_D			0x64300
+#define DDI_BUF_CTL_E			0x64400
+#define  DDI_BUF_CTL_ENABLE		(1<<31)
+#define  DDI_BUF_EMP_400MV_0DB_HSW	(0<<24)   /* Sel0 */
+#define  DDI_BUF_EMP_400MV_3_5DB_HSW	(1<<24)   /* Sel1 */
+#define  DDI_BUF_EMP_400MV_6DB_HSW	(2<<24)   /* Sel2 */
+#define  DDI_BUF_EMP_400MV_9_5DB_HSW	(3<<24)   /* Sel3 */
+#define  DDI_BUF_EMP_600MV_0DB_HSW	(4<<24)   /* Sel4 */
+#define  DDI_BUF_EMP_600MV_3_5DB_HSW	(5<<24)   /* Sel5 */
+#define  DDI_BUF_EMP_600MV_6DB_HSW	(6<<24)   /* Sel6 */
+#define  DDI_BUF_EMP_800MV_0DB_HSW	(7<<24)   /* Sel7 */
+#define  DDI_BUF_EMP_800MV_3_5DB_HSW	(8<<24)   /* Sel8 */
+#define  DDI_BUF_EMP_MASK		(0xf<<24)
+#define  DDI_BUF_IS_IDLE		(1<<7)
+#define  DDI_PORT_WIDTH_X1		(0<<1)
+#define  DDI_PORT_WIDTH_X2		(1<<1)
+#define  DDI_PORT_WIDTH_X4		(3<<1)
+#define  DDI_INIT_DISPLAY_DETECTED	(1<<0)
+
+/* LPT PIXCLK_GATE */
+#define PIXCLK_GATE		0xC6020
+#define  PIXCLK_GATE_UNGATE	1<<0
+#define  PIXCLK_GATE_GATE	0<<0
+
+/* SPLL */
+#define SPLL_CTL		0x46020
+#define  SPLL_PLL_ENABLE	(1<<31)
+#define  SPLL_PLL_SCC		(1<<28)
+#define  SPLL_PLL_NON_SCC	(2<<28)
+#define  SPLL_PLL_FREQ_810MHz	(0<<26)
+#define  SPLL_PLL_FREQ_1350MHz	(1<<26)
+
+/* WRPLL */
+#define WRPLL_CTL1			0x46040
+#define WRPLL_CTL2			0x46060
+#define  WRPLL_PLL_ENABLE		(1<<31)
+#define  WRPLL_PLL_SELECT_SSC		(0x01<<28)
+#define  WRPLL_PLL_SELECT_NON_SCC	(0x02<<28)
+#define  WRPLL_PLL_SELECT_LCPLL_2700	(0x03<<28)
+/* WRPLL divider programming */
+#define  WRPLL_DIVIDER_REFERENCE(x)	((x)<<0)
+#define  WRPLL_DIVIDER_POST(x)		((x)<<8)
+#define  WRPLL_DIVIDER_FEEDBACK(x)	((x)<<16)
+
+/* Port clock selection */
+#define PORT_CLK_SEL_A			0x46100
+#define PORT_CLK_SEL_B			0x46104
+#define PORT_CLK_SEL_C			0x46108
+#define PORT_CLK_SEL_D			0x4610C
+#define PORT_CLK_SEL_E			0x46110
+#define  PORT_CLK_SEL_LCPLL_2700	(0<<29)
+#define  PORT_CLK_SEL_LCPLL_1350	(1<<29)
+#define  PORT_CLK_SEL_LCPLL_810		(2<<29)
+#define  PORT_CLK_SEL_SPLL		(3<<29)
+#define  PORT_CLK_SEL_WRPLL1		(4<<29)
+#define  PORT_CLK_SEL_WRPLL2		(5<<29)
+
+/* Pipe clock selection */
+#define PIPE_CLK_SEL_A			0x46140
+#define PIPE_CLK_SEL_B			0x46144
+#define PIPE_CLK_SEL_C			0x46148
+/* For each pipe, we need to select the corresponding port clock */
+#define  PIPE_CLK_SEL_DISABLED		(0x0<<29)
+#define  PIPE_CLK_SEL_PORT(x)		((x+1)<<29)
+
+/* LCPLL Control */
+#define LCPLL_CTL			0x130040
+#define  LCPLL_PLL_DISABLE		(1<<31)
+#define  LCPLL_PLL_LOCK			(1<<30)
+#define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
+#define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
+
+/* Pipe WM_LINETIME - watermark line time */
+#define PIPE_WM_LINETIME_A		0x45270
+#define PIPE_WM_LINETIME_B		0x45274
+#define PIPE_WM_LINETIME_C		0x45278
+#define   PIPE_WM_LINETIME_MASK				(0x1ff)
+#define   PIPE_WM_LINETIME_TIME(x)			((x))
+#define   PIPE_WM_LINETIME_IPS_LINETIME_MASK		(0x1ff<<16)
+#define   PIPE_WM_LINETIME_IPS_LINETIME(x)		((x)<<16)
+
+/* SFUSE_STRAP */
+#define SFUSE_STRAP			0xc2014
+#define  SFUSE_STRAP_DDIB_DETECTED	(1<<2)
+#define  SFUSE_STRAP_DDIC_DETECTED	(1<<1)
+#define  SFUSE_STRAP_DDID_DETECTED	(1<<0)
+
+
 #endif /* _I810_REG_H */
tools/intel_reg_dumper.c +68 -0

79 lines not on this page · raw message

Signature · 1 line
1.7.10
#1 lore raw
Quoted 4 lines · Eugeni Dodonov

For now, only print their content for diffing, but also add the necessary bits that can be used for more verbose output in the fugure.

Applied, thanks.
-Daniel

Signature · 3 lines
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48