Skip to contentSkip to conversation

regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info

PATCH Applied Axel Lin 2 participants 2 messages May 17, 2012 Voltage and current regulator framework

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info

This driver has been converted to set_voltage_sel and regulator_map_voltage_linear. regulator_map_voltage_linear will check the voltage falls within specified range. The max_uV field is not used now, remove it.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/rc5t583-regulator.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)
drivers/regulator/rc5t583-regulator.c +0 -4
index 987fa34..1d34e64 100644
@@ -40,9 +40,6 @@ struct rc5t583_regulator_info {
 	uint8_t			disc_bit;
 	uint8_t			deepsleep_reg;
 
-	/* Chip constraints on regulator behavior */
-	int			max_uV;
-
 	/* Regulator specific turn-on delay  and voltage settling time*/
 	int			enable_uv_per_us;
 	int			change_uv_per_us;

@@ -106,7 +103,6 @@ static struct regulator_ops rc5t583_ops = {
 	.reg_disc_reg	= RC5T583_REG_##_disc_reg,		\
 	.disc_bit	= _disc_bit,				\
 	.deepsleep_reg	= RC5T583_REG_##_id##DAC_DS,		\
-	.max_uV		= _max_mv * 1000,			\
 	.enable_uv_per_us = _enable_mv * 1000,			\
 	.change_uv_per_us = 40 * 1000,				\
 	.deepsleep_id	= RC5T583_DS_##_id,			\
Signature · 1 line
1.7.5.4
Applied
#1 lore raw
Quoted 3 lines · Axel Lin

This driver has been converted to set_voltage_sel and regulator_map_voltage_linear. regulator_map_voltage_linear will check the voltage falls within specified range. The max_uV field is not used now, remove it.

Applied, thanks.