Skip to contentSkip to conversation

regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info

PATCH Applied Axel Lin 2 participants 2 messages May 17, 2012 Voltage and current regulator framework

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info

This driver has been converted to use regulator_map_voltage_linear and set_voltage_sel now. regulator_map_voltage_linear will check the the voltage falls within specified range. The check_range() function and max_uV field are not used now, remove them.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/max8925-regulator.c |   12 ------------
 1 files changed, 0 insertions(+), 12 deletions(-)
drivers/regulator/max8925-regulator.c +0 -12
index 0ffcb55..43dc97ec 100644
@@ -38,20 +38,10 @@ struct max8925_regulator_info {
 	struct i2c_client	*i2c;
 	struct max8925_chip	*chip;
 
-	int	max_uV;
 	int	vol_reg;
 	int	enable_reg;
 };
 
-static inline int check_range(struct max8925_regulator_info *info,
-			      int min_uV, int max_uV)
-{
-	if (min_uV < info->desc.min_uV || min_uV > info->max_uV)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int max8925_set_voltage_sel(struct regulator_dev *rdev,
 				   unsigned int selector)
 {

@@ -177,7 +167,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
 		.min_uV = min * 1000,				\
 		.uV_step = step * 1000,				\
 	},							\
-	.max_uV		= max * 1000,				\
 	.vol_reg	= MAX8925_SDV##_id,			\
 	.enable_reg	= MAX8925_SDCTL##_id,			\
 }

@@ -194,7 +183,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
 		.min_uV = min * 1000,				\
 		.uV_step = step * 1000,				\
 	},							\
-	.max_uV		= max * 1000,				\
 	.vol_reg	= MAX8925_LDOVOUT##_id,			\
 	.enable_reg	= MAX8925_LDOCTL##_id,			\
 }
Signature · 1 line
1.7.5.4
Applied
#1 lore raw
Quoted 4 lines · Axel Lin

This driver has been converted to use regulator_map_voltage_linear and set_voltage_sel now. regulator_map_voltage_linear will check the the voltage falls within specified range. The check_range() function and max_uV field are not used now, remove them.

Applied, thanks.