Kirkwood: add lschlv2 and lsxhl board support
Subsystems (2)
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Changes:
v9:
- rebase to marvell custodian tree, merged with wolfgangs master
v8:
- revert CONFIG_RAND to old CONFIG_RANDOM_MACADDR
- the features CONFIG_BOOTP_RANDOM_DELAY and CONFIG_CMD_LINK_LOCAL pulls rand.o implicitly now as suggested by Joe Hershberger
- remove reset_phy() from board code. Thanks Luka Perkov for pointing this out
- dont derive the seed from the timer in seed_mac()
v7:
- rebase to new master
- new function rand_r()
- lib/rand.c is now selected by CONFIG_RAND, because it is used by three features (CONFIG_BOOTP_RANDOM_DELAY, CONFIG_RANDOM_MACADDR and CONFIG_CMD_LINK_LOCAL)
- new patch: use the common rand() functions as a replacement for net_rand.c. This will fix the confliction function declarations, too.
v6:
- remove dead code in Makefile
- use eth_{g,s}etenv_enetaddr() instead of eth_{g,s}etenv_enetaddr_by_index() since index is always 0
v5:
- combine patchset again. the "net: *" patches should be individually acked by net custodian
- make features configurable at compile time (CONFIG_RANDOM_MACADDR and CONFIG_SETENV_ENETADDR_BY_INDEX)
- remove unused variable in boards/buffalo/lsxl.c
- fix potential compiler warning "too many arguments for format"
- new patch which fixes eth_getenv_enetaddr_by_index() and eth_mac_skip()
- change initial seed of rand() to 1
- enable CONFIG_API and CONFIG_CMD_ELF for lsxl boards
v4:
- typo fixes (thanks Mike)
- seed all 46bits of the generated ethernet address (suggested by Mike)
- split patchset (generic net helpers and lsxl support)
- fix typo in bootcmd_hdd
- removed board/buffalo/lsxl/config.mk patch from patchset
v3:
- add "Kirkwood:" prefix to patch subject
- moved board/buffalo/lsxl/config.mk to an own patch, so it can be separately acked/naked ;)
- removed any hardcoding, that is the mac address is now automatically generated (random, locally administered) and the IP settings are fetched with DHCP/BOOTP.
- add detailed comments to every configuration line in kwbimage.cfg
- add comments in MPP configuration about GPIO usage
- removed lschlv2 ramboot
- use short board ident string
- small cleanups
v2:
- add to buffalo vendor directory instead of Marvell
- add both boards to MAINTAINERS
- don't define values for feature macros
- use tab for vertical alignment
- remove static network configuration, instead introduce a rescue mode
- add some convenience scripts
- small cleanups
Michael Walle (4):
lib: add rand() function
net: use common rand()/srand() functions
net: add helper to generate random mac address
Kirkwood: add lschlv2 and lsxhl board support
MAINTAINERS | 5 + board/buffalo/lsxl/Makefile | 44 +++++ board/buffalo/lsxl/kwbimage-lschl.cfg | 229 ++++++++++++++++++++++++++ board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 ++++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.c | 283 +++++++++++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.h | 75 +++++++++ boards.cfg | 2 + include/common.h | 10 ++ include/configs/lsxl.h | 182 +++++++++++++++++++++ include/net.h | 17 ++ lib/Makefile | 5 +- lib/rand.c | 48 ++++++ net/Makefile | 2 - net/eth.c | 22 +++ net/link_local.c | 7 +- net/net_rand.c | 68 -------- net/net_rand.h | 31 +++- 17 files changed, 1178 insertions(+), 81 deletions(-) create mode 100644 board/buffalo/lsxl/Makefile create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644 board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h create mode 100644 include/configs/lsxl.h create mode 100644 lib/rand.c delete mode 100644 net/net_rand.c
Signature · 1 line
1.7.2.5
PATCH v9 1/4 lib: add rand() function
It's a PRNG using the simple and fast xorshift method.
--- include/common.h | 8 ++++++++ lib/Makefile | 1 + lib/rand.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+), 0 deletions(-) create mode 100644 lib/rand.c
include/common.h +8 -0
@@ -751,6 +751,14 @@ char * strmhz(char *buf, unsigned long hz);/* lib/crc32.c */ #include <u-boot/crc.h> +/* lib/rand.c */ +#ifdef CONFIG_RANDOM_MACADDR +#define RAND_MAX -1U +void srand (unsigned int seed); +unsigned int rand (void ); +unsigned int rand_r (unsigned int *seedp); +#endif +/* common/console.c */ int console_init_f (void );/* Before relocation; uses the serial stuff */ int console_init_r (void );/* After relocation; uses the console stuff */
lib/Makefile +1 -0
@@ -66,6 +66,7 @@ COBJS-y += string.o COBJS-y += time.o COBJS-$(CONFIG_BOOTP_PXE) += uuid.o COBJS-y += vsprintf.o +COBJS-$(CONFIG_RANDOM_MACADDR) += rand.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
lib/rand.c new file +48 -0
48 lines not on this page · raw message
Signature · 1 line
1.7.2.5
PATCH v9 2/4 net: use common rand()/srand() functions
In reply to Michael WalleReplace rand() with the functions from lib/. The link-local network code stores its own seed, derived from the MAC address. Thus making it independent from calls to srand() in other modules.
--- include/common.h | 4 ++- lib/Makefile | 4 ++- net/Makefile | 2 - net/link_local.c | 7 +++-- net/net_rand.c | 68 ------------------------------------------------------ net/net_rand.h | 31 +++++++++++++++++++----- 6 files changed, 34 insertions(+), 82 deletions(-) delete mode 100644 net/net_rand.c
include/common.h +3 -1
@@ -752,7 +752,9 @@ char * strmhz(char *buf, unsigned long hz);#include <u-boot/crc.h> /* lib/rand.c */ -#ifdef CONFIG_RANDOM_MACADDR +#if defined(CONFIG_RANDOM_MACADDR ) || \ + defined(CONFIG_BOOTP_RANDOM_DELAY ) || \ + defined(CONFIG_CMD_LINK_LOCAL )#define RAND_MAX -1Uvoid srand (unsigned int seed);unsigned int rand (void );
lib/Makefile +3 -1
@@ -67,8 +67,10 @@ COBJS-y += time.o COBJS-$(CONFIG_BOOTP_PXE) += uuid.o COBJS-y += vsprintf.o COBJS-$(CONFIG_RANDOM_MACADDR) += rand.o +COBJS-$(CONFIG_BOOTP_RANDOM_DELAY) += rand.o +COBJS-$(CONFIG_CMD_LINK_LOCAL) += rand.o -COBJS := $(COBJS-y) +COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
net/Makefile +0 -2
@@ -34,8 +34,6 @@ COBJS-$(CONFIG_CMD_DNS) += dns.o COBJS-$(CONFIG_CMD_NET) += eth.o COBJS-$(CONFIG_CMD_LINK_LOCAL) += link_local.o COBJS-$(CONFIG_CMD_NET) += net.o -COBJS-$(CONFIG_BOOTP_RANDOM_DELAY) += net_rand.o -COBJS-$(CONFIG_CMD_LINK_LOCAL) += net_rand.o COBJS-$(CONFIG_CMD_NFS) += nfs.o COBJS-$(CONFIG_CMD_PING) += ping.o COBJS-$(CONFIG_CMD_RARP) += rarp.o
net/link_local.c +4 -3
@@ -56,6 +56,7 @@ static unsigned conflicts;static unsigned nprobes;static unsigned nclaims;static int ready; +static unsigned int seed;static void link_local_timeout (void );
@@ -68,7 +69,7 @@ static IPaddr_t pick(void)unsigned tmp;do { - tmp =rand () &IN_CLASSB_HOST ; + tmp =rand_r (&seed) &IN_CLASSB_HOST ; }while (tmp > (IN_CLASSB_HOST -0x0200 ));return (IPaddr_t )htonl ((LINKLOCAL_ADDR +0x0100 ) + tmp); }
@@ -78,7 +79,7 @@ static IPaddr_t pick(void)*/ static inline unsigned random_delay_ms (unsigned secs) { -return rand () % (secs *1000 ); +return rand_r (&seed) % (secs *1000 ); }static void configure_wait (void )
@@ -109,7 +110,7 @@ void link_local_start(void) } NetOurSubnetMask =IN_CLASSB_NET ; -srand_mac (); + seed =seed_mac ();if (ip ==0 ) ip =pick ();
net/net_rand.c deleted +0 -68
68 lines not on this page · raw message
net/net_rand.h +24 -7
@@ -9,18 +9,35 @@#ifndef __NET_RAND_H__#define __NET_RAND_H__ -#define RAND_MAX 0xffffffff +#include <common.h> /* -* Seed the random number generator using the eth0 MAC address +* Return a seed for the PRNG derived from the eth0 MAC address. */ -void srand_mac (void ); +static inline unsigned int seed_mac (void ) +{ +unsigned char enetaddr[6 ]; +unsigned int seed; + +/* get our mac */ +eth_getenv_enetaddr ("ethaddr" , enetaddr); + + seed = enetaddr[5 ]; + seed ^= enetaddr[4 ] <<8 ; + seed ^= enetaddr[3 ] <<16 ; + seed ^= enetaddr[2 ] <<24 ; + seed ^= enetaddr[1 ]; + seed ^= enetaddr[0 ] <<8 ; + +return seed; +}/* -* Get a random number (after seeding with MAC address) -* -* @return random number +* Seed the random number generator using the eth0 MAC address. */ -unsigned long rand (void ); +static inline void srand_mac (void ) +{ +srand (seed_mac ()); +}#endif /* __NET_RAND_H__ */
Signature · 1 line
1.7.2.5
PATCH v9 2/4 net: use common rand()/srand() functions
Dear Michael,
Quoted 6 lines · In message <[email protected]> you wrote:
Replace
rand()with the functions fromlib/. The link-local network code stores its own seed, derived from the MAC address. Thus making it independent from calls tosrand()in other modules.Signed-off-by Michael Walle <[email protected]>Acked-by Joe Hershberger <[email protected]>
Quoted 9 lines
--- include/common.h | 4 ++- lib/Makefile | 4 ++- net/Makefile | 2 - net/link_local.c | 7 +++-- net/net_rand.c | 68 ------------------------------------------------------ net/net_rand.h | 31 +++++++++++++++++++----- 6 files changed, 34 insertions(+), 82 deletions(-) delete mode 100644 net/net_rand.c
This commit causes build warnings like these for a zillion of boards:
net_rand.h:40:2: warning: implicit declaration of function 'srand' [-Wimplicit-function-declaration]
Please fix!
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Unix is supported by IBM, like a hanging man is supported by rope. - Don Libes & Sandy Ressler: _Life With Unix_
PATCH v9 2/4 net: use common rand()/srand() functions
Hi Wolfgang,
Am Sonntag 08 Juli 2012, 22:31:36 schrieben Sie:
Quoted 3 lines
Dear Michael,
In message <1338931997-13419-3-git-send-email-
Quoted 1 line · [email protected]> you wrote:
Quoted 1 line
Replace
rand()with the functions fromlib/. The
link-local network code
Quoted 1 line
Quoted 1 line
stores its own seed, derived from the MAC address.
Thus making it
Quoted 6 lines
Quoted 6 lines
independent from calls to
srand()in other modules.Signed-off-by Michael Walle <[email protected]>Acked-by Joe Hershberger <[email protected]>---
Quoted 6 lines
Quoted 6 lines
include/common.h | 4 ++- lib/Makefile | 4 ++- net/Makefile | 2 - net/link_local.c | 7 +++-- net/net_rand.c | 68
------------------------------------------------------net/net_rand.h
Quoted 5 lines
Quoted 3 lines
| 31 +++++++++++++++++++-----
6 files changed, 34 insertions(+), 82 deletions(-) delete mode 100644 net/net_rand.cThis commit causes build warnings like these for a
zillion of boards:
Quoted 2 lines
net_rand.h:40:2: warning: implicit declaration of
function 'srand'
Quoted 1 line
[-Wimplicit-function-declaration]
Kim Philipps already posted a patch for this, see here:
http://patchwork.ozlabs.org/patch/169295/
and here:
http://lists.denx.de/pipermail/u-boot/2012-
July/127745.html
Signature · 1 line
Michael
PATCH v9 2/4 net: use common rand()/srand() functions
Dear Michael,
Quoted 3 lines · In message <[email protected]> you wrote:
Kim Philipps already posted a patch for this, see here:
http://patchwork.ozlabs.org/patch/169295/
I see. Tnx.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Am I your nanny? The kernel is there to support user programs, but
it's a _resource_ handler, not a baby feeder. - Linus Torvalds in
<[email protected]>PATCH v9 3/4 net: add helper to generate random mac address
In reply to Michael WalleAdd new function eth_random_enetaddr() to generate a locally administered ethernet address.
--- include/net.h | 17 +++++++++++++++++ net/eth.c | 22 ++++++++++++++++++++++ 2 files changed, 39 insertions(+), 0 deletions(-)
include/net.h +17 -0
@@ -122,6 +122,23 @@ extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr);extern int eth_getenv_enetaddr_by_index (const char *base_name,int index,uchar *enetaddr); +#ifdef CONFIG_RANDOM_MACADDR +/* +* The u-boot policy does not allow hardcoded ethernet addresses. Under the +* following circumstances a random generated address is allowed: +* - in emergency cases, where you need a working network connection to set +* the ethernet address. +* Eg. you want a rescue boot and don't have a serial port to access the +* CLI to set environment variables. +* +* In these cases, we generate a random locally administered ethernet address. +* +* Args: +* enetaddr - returns 6 byte hardware address +*/ +extern void eth_random_enetaddr (uchar *enetaddr); +#endif +extern int usb_eth_initialize (bd_t *bi);extern int eth_init (bd_t *bis);/* Initialize the device */ extern int eth_send (void *packet,int length);/* Send a packet */
net/eth.c +22 -0
@@ -70,6 +70,28 @@ static int eth_mac_skip(int index)return ((skip_state =getenv (enetvar)) !=NULL ); } +#ifdef CONFIG_RANDOM_MACADDR +void eth_random_enetaddr (uchar *enetaddr) +{ +uint32_t rval; + +srand (get_timer (0 )); + + rval =rand (); + enetaddr[0 ] = rval &0xff ; + enetaddr[1 ] = (rval >>8 ) &0xff ; + enetaddr[2 ] = (rval >>16 ) &0xff ; + + rval =rand (); + enetaddr[3 ] = rval &0xff ; + enetaddr[4 ] = (rval >>8 ) &0xff ; + enetaddr[5 ] = (rval >>16 ) &0xff ; + +/* make sure it's local and unicast */ + enetaddr[0 ] = (enetaddr[0 ] |0x02 ) & ~0x01 ; +} +#endif +/* * CPU and board-specific Ethernet initializations. Aliased function * signals caller to move on
Signature · 1 line
1.7.2.5
PATCH v9 4/4 Kirkwood: add lschlv2 and lsxhl board support
In reply to Michael WalleThis patch adds support for both the Linkstation Live (LS-CHLv2) and Linkstation Pro (LS-XHL) by Buffalo.
--- MAINTAINERS | 5 + board/buffalo/lsxl/Makefile | 44 +++++ board/buffalo/lsxl/kwbimage-lschl.cfg | 229 ++++++++++++++++++++++++++ board/buffalo/lsxl/kwbimage-lsxhl.cfg | 229 ++++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.c | 283 +++++++++++++++++++++++++++++++++ board/buffalo/lsxl/lsxl.h | 75 +++++++++ boards.cfg | 2 + include/configs/lsxl.h | 182 +++++++++++++++++++++ 8 files changed, 1049 insertions(+), 0 deletions(-) create mode 100644 board/buffalo/lsxl/Makefile create mode 100644 board/buffalo/lsxl/kwbimage-lschl.cfg create mode 100644 board/buffalo/lsxl/kwbimage-lsxhl.cfg create mode 100644 board/buffalo/lsxl/lsxl.c create mode 100644 board/buffalo/lsxl/lsxl.h create mode 100644 include/configs/lsxl.h
MAINTAINERS +5 -0
@@ -902,6 +902,11 @@ Prafulla Wadaskar <[email protected]> rd6281a ARM926EJS (Kirkwood SoC) sheevaplug ARM926EJS (Kirkwood SoC) +Michael Walle <[email protected]> + + lschlv2 ARM926EJS (Kirkwood SoC) + lsxhl ARM926EJS (Kirkwood SoC) + Tom Warren <[email protected]> harmony Tegra2 (ARM7 & A9 Dual Core)
board/buffalo/lsxl/Makefile new file +44 -0
44 lines not on this page · raw message
board/buffalo/lsxl/kwbimage-lschl.cfg new file +229 -0
229 lines not on this page · raw message
board/buffalo/lsxl/kwbimage-lsxhl.cfg new file +229 -0
229 lines not on this page · raw message
board/buffalo/lsxl/lsxl.c new file +283 -0
283 lines not on this page · raw message
board/buffalo/lsxl/lsxl.h new file +75 -0
75 lines not on this page · raw message
boards.cfg +2 -0
@@ -138,6 +138,8 @@ enbw_cmc arm arm926ejs enbw_cmc enbw calimain arm arm926ejs calimain omicron davinci pogo_e02 arm arm926ejs - cloudengines kirkwood dns325 arm arm926ejs - d-link kirkwood +lschlv2 arm arm926ejs lsxl buffalo kirkwood lsxl:LSCHLV2 +lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD,KM_DISABLE_PCI km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI,KM_RECONFIG_XLX mgcoge3un arm arm926ejs km_arm keymile kirkwood
include/configs/lsxl.h new file +182 -0
182 lines not on this page · raw message
Signature · 1 line
1.7.2.5
v9 cover Kirkwood: add lschlv2 and lsxhl board support
In reply to Michael WalleHi Prafulla,
Am Dienstag 05 Juni 2012, 23:33:13 schrieb Michael Walle:
Quoted 3 lines
Changes:
v9:
- rebase to marvell custodian tree, merged with wolfgangs master
[..snip..]
I had to merge your tree with wolfgangs master, because my second net patch depends on the latest net patches by Joe.
So please make sure you merge wolfgangs master with your tree before applying these patches.
Signature · 1 line
Michael
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Hi Prafulla,
Quoted 7 lines · Michael Walle
Hi Prafulla,
Am Dienstag 05 Juni 2012, 23:33:13 schrieb Michael Walle:
Quoted 3 lines
Changes:
v9:
?- rebase to marvell custodian tree, merged with wolfgangs master
Quoted 8 lines
[..snip..]
I had to merge your tree with wolfgangs master, because my second net patch depends on the latest net patches by Joe.
So please make sure you merge wolfgangs master with your tree before applying these patches.
It seems a better way to handle this is to rebase marvell onto WD's master and push that to the marvell tree, allowing Michael to rebase his patches onto that version. It seems there should not be a merge here.
-Joe
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Quoted 17 lines · Joe Hershberger
Hi Prafulla,
Quoted 11 lines · Michael Walle
Hi Prafulla,
Am Dienstag 05 Juni 2012, 23:33:13 schrieb Michael Walle:
Quoted 3 lines
Changes:
v9:
?- rebase to marvell custodian tree, merged with wolfgangs master[..snip..]
I had to merge your tree with wolfgangs master, because my second net
patch
Quoted 2 lines
depends on the latest net patches by Joe.
Quoted 8 lines
Quoted 1 line
So please make sure you merge wolfgangs master with your tree before
applying
Quoted 1 line
these patches.
It seems a better way to handle this is to rebase marvell onto WD's master and push that to the marvell tree, allowing Michael to rebase his patches onto that version. It seems there should not be a merge here.
that should work too. but my patcheset v9 should apply cleanly regardless of which way you choose.
michael
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Quoted 28 lines
-----Original Message-----
From: Michael Walle [mailto:michael at walle.cc]
Sent: 06 June 2012 12:39
To: Joe Hershberger
Cc: Prafulla Wadaskar; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board supportQuoted 3 lines · Joe Hershberger
Hi Prafulla,
On Tue, Jun 5, 2012 at 4:36 PM, Michael Walle <[email protected]>
Quoted 10 lines · wrote:
Quoted 10 lines
Hi Prafulla,
Am Dienstag 05 Juni 2012, 23:33:13 schrieb Michael Walle:
Quoted 3 lines
Changes:
v9:
?- rebase to marvell custodian tree, merged with wolfgangs master[..snip..]
Quoted 9 lines
Quoted 1 line
Quoted 1 line
I had to merge your tree with wolfgangs master, because my second
net
Quoted 4 lines
patch
Quoted 3 lines
depends on the latest net patches by Joe.
So please make sure you merge wolfgangs master with your tree
before
Quoted 2 lines
applying
Quoted 1 line
these patches.
u-boot-marvell.git is cloned from u-boot-arm.git, and I always sync with this before any task. And just to keep it clean for pull requests I would not like to pull any other repository in it.
Copying Albert on this, who can sync u-boot.git into u-boot-arm.git if something is missing.
Regards..
Prafulla . . .
Quoted 12 lines
Quoted 5 lines
It seems a better way to handle this is to rebase marvell onto WD's master and push that to the marvell tree, allowing Michael to rebase his patches onto that version. It seems there should not be a merge here.
that should work too. but my patcheset v9 should apply cleanly regardless of which way you choose.
michael
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Hi all,
Am Mittwoch 06 Juni 2012, 13:26:40 schrieb Prafulla Wadaskar:
Quoted 6 lines
u-boot-marvell.git is cloned from u-boot-arm.git, and I always sync with this before any task. And just to keep it clean for pull requests I would not like to pull any other repository in it.
Copying Albert on this, who can sync u-boot.git into u-boot-arm.git if something is missing.
ping, any news on this? :)
Signature · 1 line
michael
v9 cover Kirkwood: add lschlv2 and lsxhl board support
In reply to Prafulla WadaskarHi Prafulla,
Quoted 3 lines
u-boot-marvell.git is cloned from u-boot-arm.git, and I always sync with this before any task. And just to keep it clean for pull requests I would not like to pull any other repository in it.
i just got informed by albert, that he updated his tree. So hopefully the patchset can now be merged without a conflict. If not, i'll rebase it again.
Signature · 1 line
Michael
v9 cover Kirkwood: add lschlv2 and lsxhl board support
Quoted 15 lines
-----Original Message-----
From: Michael Walle [mailto:michael at walle.cc]
Sent: 26 June 2012 03:00
To: Prafulla Wadaskar
Cc: Joe Hershberger; u-boot at lists.denx.de; albert.u.boot at aribaud.net
Subject: Re: [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board supportHi Prafulla,
Quoted 1 line
u-boot-marvell.git is cloned from u-boot-arm.git, and I always sync
with
Quoted 8 lines
Quoted 1 line
this before any task. And just to keep it clean for pull requests I
would
Quoted 1 line
not like to pull any other repository in it.
i just got informed by albert, that he updated his tree. So hopefully the
patchset can now be merged without a conflict. If not, i'll rebase it again.
Hi Michael
I know that, but even I am also bit busy with some priority task. I will do it by end of day today.
Sorry for inconvenience :-(
Regards..
Prafulla . ..
v9 cover Kirkwood: add lschlv2 and lsxhl board support
In reply to Michael WalleQuoted 15 lines
-----Original Message-----
From: Michael Walle [mailto:michael at walle.cc]
Sent: 26 June 2012 03:00
To: Prafulla Wadaskar
Cc: Joe Hershberger; u-boot at lists.denx.de; albert.u.boot at aribaud.net
Subject: Re: [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board supportHi Prafulla,
Quoted 1 line
u-boot-marvell.git is cloned from u-boot-arm.git, and I always sync
with
Quoted 8 lines
Quoted 1 line
this before any task. And just to keep it clean for pull requests I
would
Quoted 1 line
not like to pull any other repository in it.
i just got informed by albert, that he updated his tree. So hopefully the
patchset can now be merged without a conflict. If not, i'll rebase it again.
Hi Michael,
Applied this entire patch series to u-boot-marvell.git master branch. Sorry for the delays on our side and many thanks for your patience.
Regards...
Prafulla . . .