regulator: tps6524x: Convert to regulator_list_voltage_table()

PATCH Applied Axel Lin 2 participants 3 messages Jun 20, 2012 – Jul 2, 2012 Voltage and current regulator framework

Share & tools

Axel Lin

author

2012-06-20 14:30 UTC #0 lore raw

PATCH 1/2 regulator: tps6524x: Convert to regulator_list_voltage_table()

This patch adds fixed_5000000_voltage table for fixed voltage, so we can convert regulator_ops to regulator_list_voltage_table.

We can differentiate fixed voltage by checking rdev->desc->n_voltages == 1, thus remove the FIXED_VOLTAGE flag usage.

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/tps6524x-regulator.c |   52 ++++++++++++--------------------
 1 file changed, 19 insertions(+), 33 deletions(-)

drivers/regulator/tps6524x-regulator.c +19 ~~-33~~

index 1b299aa..48e37bd 100644
@@ -111,7 +111,6 @@
 #define N_REGULATORS		(N_DCDC + N_LDO + N_SWITCH)
 
 #define FIXED_ILIMSEL		BIT(0)
-#define FIXED_VOLTAGE		BIT(1)
 
 #define CMD_READ(reg)		((reg) << 6)
 #define CMD_WRITE(reg)		(BIT(5) | (reg) << 6)

@@ -129,8 +128,7 @@ struct field {
 struct supply_info {
 	const char	*name;
 	int		n_voltages;
-	const int	*voltages;
-	int		fixed_voltage;
+	const unsigned int *voltages;
 	int		n_ilimsels;
 	const int	*ilimsels;
 	int		fixed_ilimsel;

@@ -307,7 +305,7 @@ static int write_field(struct tps6524x *hw, const struct field *field,
 				    val << field->shift);
 }
 
-static const int dcdc1_voltages[] = {
+static const unsigned int dcdc1_voltages[] = {
 	 800000,  825000,  850000,  875000,
 	 900000,  925000,  950000,  975000,
 	1000000, 1025000, 1050000, 1075000,

@@ -318,7 +316,7 @@ static const int dcdc1_voltages[] = {
 	1500000, 1525000, 1550000, 1575000,
 };
 
-static const int dcdc2_voltages[] = {
+static const unsigned int dcdc2_voltages[] = {
 	1400000, 1450000, 1500000, 1550000,
 	1600000, 1650000, 1700000, 1750000,
 	1800000, 1850000, 1900000, 1950000,

@@ -329,7 +327,7 @@ static const int dcdc2_voltages[] = {
 	2800000, 2850000, 2900000, 2950000,
 };
 
-static const int dcdc3_voltages[] = {
+static const unsigned int dcdc3_voltages[] = {
 	2400000, 2450000, 2500000, 2550000, 2600000,
 	2650000, 2700000, 2750000, 2800000, 2850000,
 	2900000, 2950000, 3000000, 3050000, 3100000,

@@ -337,20 +335,24 @@ static const int dcdc3_voltages[] = {
 	3400000, 3450000, 3500000, 3550000, 3600000,
 };
 
-static const int ldo1_voltages[] = {
+static const unsigned int ldo1_voltages[] = {
 	4300000, 4350000, 4400000, 4450000,
 	4500000, 4550000, 4600000, 4650000,
 	4700000, 4750000, 4800000, 4850000,
 	4900000, 4950000, 5000000, 5050000,
 };
 
-static const int ldo2_voltages[] = {
+static const unsigned int ldo2_voltages[] = {
 	1100000, 1150000, 1200000, 1250000,
 	1300000, 1700000, 1750000, 1800000,
 	1850000, 1900000, 3150000, 3200000,
 	3250000, 3300000, 3350000, 3400000,
 };
 
+static const unsigned int fixed_5000000_voltage[] = {
+	5000000
+};
+
 static const int ldo_ilimsel[] = {
 	400000, 1500000
 };

@@ -424,8 +426,8 @@ static const struct supply_info supply_info[N_REGULATORS] = {
 	},
 	{
 		.name		= "USB",
-		.flags		= FIXED_VOLTAGE,
-		.fixed_voltage	= 5000000,
+		.n_voltages	= ARRAY_SIZE(fixed_5000000_voltage),
+		.voltages	= fixed_5000000_voltage,
 		.n_ilimsels	= ARRAY_SIZE(usb_ilimsel),
 		.ilimsels	= usb_ilimsel,
 		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,

@@ -435,29 +437,15 @@ static const struct supply_info supply_info[N_REGULATORS] = {
 	},
 	{
 		.name		= "LCD",
-		.flags		= FIXED_VOLTAGE | FIXED_ILIMSEL,
-		.fixed_voltage	= 5000000,
+		.n_voltages	= ARRAY_SIZE(fixed_5000000_voltage),
+		.voltages	= fixed_5000000_voltage,
+		.flags		= FIXED_ILIMSEL,
 		.fixed_ilimsel	=  400000,
 		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
 					     BLOCK_LCD_SHIFT),
 	},
 };
 
-static int list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
-	const struct supply_info *info;
-	struct tps6524x *hw;
-
-	hw	= rdev_get_drvdata(rdev);
-	info	= &supply_info[rdev_get_id(rdev)];
-
-	if (info->flags & FIXED_VOLTAGE)
-		return selector ? -EINVAL : info->fixed_voltage;
-
-	return ((selector < info->n_voltages) ?
-		info->voltages[selector] : -EINVAL);
-}
-
 static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 {
 	const struct supply_info *info;

@@ -466,7 +454,7 @@ static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 	hw	= rdev_get_drvdata(rdev);
 	info	= &supply_info[rdev_get_id(rdev)];
 
-	if (info->flags & FIXED_VOLTAGE)
+	if (rdev->desc->n_voltages == 1)
 		return -EINVAL;
 
 	return write_field(hw, &info->voltage, selector);

@@ -481,7 +469,7 @@ static int get_voltage_sel(struct regulator_dev *rdev)
 	hw	= rdev_get_drvdata(rdev);
 	info	= &supply_info[rdev_get_id(rdev)];
 
-	if (info->flags & FIXED_VOLTAGE)
+	if (rdev->desc->n_voltages == 1)
 		return 0;
 
 	ret = read_field(hw, &info->voltage);

@@ -577,7 +565,7 @@ static struct regulator_ops regulator_ops = {
 	.disable		= disable_supply,
 	.get_voltage_sel	= get_voltage_sel,
 	.set_voltage_sel	= set_voltage_sel,
-	.list_voltage		= list_voltage,
+	.list_voltage		= regulator_list_voltage_table,
 	.set_current_limit	= set_current_limit,
 	.get_current_limit	= get_current_limit,
 };

@@ -629,13 +617,11 @@ static int __devinit pmic_probe(struct spi_device *spi)
 		hw->desc[i].name	= info->name;
 		hw->desc[i].id		= i;
 		hw->desc[i].n_voltages	= info->n_voltages;
+		hw->desc[i].volt_table	= info->voltages;
 		hw->desc[i].ops		= &regulator_ops;
 		hw->desc[i].type	= REGULATOR_VOLTAGE;
 		hw->desc[i].owner	= THIS_MODULE;
 
-		if (info->flags & FIXED_VOLTAGE)
-			hw->desc[i].n_voltages = 1;
-
 		config.dev = dev;
 		config.init_data = init_data;
 		config.driver_data = hw;

Signature · 1 line

1.7.9.5

Axel Lin

author

2012-06-20 14:32 UTC #1 lore raw

PATCH 2/2 regulator: tps6524x: Convert fixed ilimsel to table based

This patch refactors the code to get rid of the fixed_ilimsel and FIXED_ILIMSEL flag usage, and convert all the fixed ilimsel to table based (with one entry in the table).

We can differentiate fixed ilimsel by checking info->n_ilimsels == 1, thus FIXED_ILIMSEL flag can be removed.

This change makes the logic of the code simpler as all the ilimsels are table based now.

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/tps6524x-regulator.c |   44 +++++++++++++++++++-------------
 1 file changed, 26 insertions(+), 18 deletions(-)

drivers/regulator/tps6524x-regulator.c +26 ~~-18~~

index 48e37bd..947ece9 100644
@@ -110,8 +110,6 @@
 #define N_SWITCH		2
 #define N_REGULATORS		(N_DCDC + N_LDO + N_SWITCH)
 
-#define FIXED_ILIMSEL		BIT(0)
-
 #define CMD_READ(reg)		((reg) << 6)
 #define CMD_WRITE(reg)		(BIT(5) | (reg) << 6)
 #define STAT_CLK		BIT(3)

@@ -130,9 +128,7 @@ struct supply_info {
 	int		n_voltages;
 	const unsigned int *voltages;
 	int		n_ilimsels;
-	const int	*ilimsels;
-	int		fixed_ilimsel;
-	int		flags;
+	const unsigned int *ilimsels;
 	struct field	enable, voltage, ilimsel;
 };

@@ -353,24 +349,36 @@ static const unsigned int fixed_5000000_voltage[] = {
 	5000000
 };
 
-static const int ldo_ilimsel[] = {
+static const unsigned int ldo_ilimsel[] = {
 	400000, 1500000
 };
 
-static const int usb_ilimsel[] = {
+static const unsigned int usb_ilimsel[] = {
 	200000, 400000, 800000, 1000000
 };
 
+static const unsigned int fixed_2400000_ilimsel[] = {
+	2400000
+};
+
+static const unsigned int fixed_1200000_ilimsel[] = {
+	1200000
+};
+
+static const unsigned int fixed_400000_ilimsel[] = {
+	400000
+};
+
 #define __MK_FIELD(_reg, _mask, _shift) \
 	{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }
 
 static const struct supply_info supply_info[N_REGULATORS] = {
 	{
 		.name		= "DCDC1",
-		.flags		= FIXED_ILIMSEL,
 		.n_voltages	= ARRAY_SIZE(dcdc1_voltages),
 		.voltages	= dcdc1_voltages,
-		.fixed_ilimsel	= 2400000,
+		.n_ilimsels	= ARRAY_SIZE(fixed_2400000_ilimsel),
+		.ilimsels	= fixed_2400000_ilimsel,
 		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
 					     DCDCDCDC1_EN_SHIFT),
 		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,

@@ -378,10 +386,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
 	},
 	{
 		.name		= "DCDC2",
-		.flags		= FIXED_ILIMSEL,
 		.n_voltages	= ARRAY_SIZE(dcdc2_voltages),
 		.voltages	= dcdc2_voltages,
-		.fixed_ilimsel	= 1200000,
+		.n_ilimsels	= ARRAY_SIZE(fixed_1200000_ilimsel),
+		.ilimsels	= fixed_1200000_ilimsel,
 		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
 					     DCDCDCDC2_EN_SHIFT),
 		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,

@@ -389,10 +397,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
 	},
 	{
 		.name		= "DCDC3",
-		.flags		= FIXED_ILIMSEL,
 		.n_voltages	= ARRAY_SIZE(dcdc3_voltages),
 		.voltages	= dcdc3_voltages,
-		.fixed_ilimsel	= 1200000,
+		.n_ilimsels	= ARRAY_SIZE(fixed_1200000_ilimsel),
+		.ilimsels	= fixed_1200000_ilimsel,
 		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
 					DCDCDCDC3_EN_SHIFT),
 		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,

@@ -439,8 +447,8 @@ static const struct supply_info supply_info[N_REGULATORS] = {
 		.name		= "LCD",
 		.n_voltages	= ARRAY_SIZE(fixed_5000000_voltage),
 		.voltages	= fixed_5000000_voltage,
-		.flags		= FIXED_ILIMSEL,
-		.fixed_ilimsel	=  400000,
+		.n_ilimsels	= ARRAY_SIZE(fixed_400000_ilimsel),
+		.ilimsels	= fixed_400000_ilimsel,
 		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
 					     BLOCK_LCD_SHIFT),
 	},

@@ -491,7 +499,7 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA,
 	hw	= rdev_get_drvdata(rdev);
 	info	= &supply_info[rdev_get_id(rdev)];
 
-	if (info->flags & FIXED_ILIMSEL)
+	if (info->n_ilimsels == 1)
 		return -EINVAL;
 
 	for (i = 0; i < info->n_ilimsels; i++)

@@ -514,8 +522,8 @@ static int get_current_limit(struct regulator_dev *rdev)
 	hw	= rdev_get_drvdata(rdev);
 	info	= &supply_info[rdev_get_id(rdev)];
 
-	if (info->flags & FIXED_ILIMSEL)
-		return info->fixed_ilimsel;
+	if (info->n_ilimsels == 1)
+		return info->ilimsels[0];
 
 	ret = read_field(hw, &info->ilimsel);
 	if (ret < 0)

Signature · 1 line

1.7.9.5

Mark Brown

Applied

2012-07-02 17:26 UTC #2 lore raw

In reply to Axel Lin

Quoted 2 lines · Axel Lin

This patch adds fixed_5000000_voltage table for fixed voltage, so we can convert regulator_ops to regulator_list_voltage_table.

Applied both, thanks.