3.4.4-stable review

This is the start of the stable review cycle for the 3.4.4 release. There are 61 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri Jun 22 17:30:18 UTC 2012. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.4-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------

 Makefile                                          |    4 +-
 arch/arm/mach-imx/crm-regs-imx5.h                 |    2 +-
 arch/arm/mach-imx/hotplug.c                       |   42 ++++++++-
 arch/arm/mach-imx/mach-mx21ads.c                  |    2 +-
 arch/powerpc/include/asm/hw_irq.h                 |    3 +
 arch/x86/xen/enlighten.c                          |    8 ++
 drivers/char/hw_random/atmel-rng.c                |    2 +-
 drivers/edac/i7core_edac.c                        |   15 +---
 drivers/edac/sb_edac.c                            |   10 +--
 drivers/gpu/drm/i915/intel_dp.c                   |    7 +-
 drivers/gpu/drm/radeon/evergreen.c                |    3 +
 drivers/gpu/drm/radeon/evergreend.h               |    1 +
 drivers/gpu/drm/radeon/r600.c                     |    1 +
 drivers/gpu/drm/radeon/r600d.h                    |    1 +
 drivers/gpu/drm/radeon/rv770.c                    |    5 +-
 drivers/gpu/drm/radeon/rv770d.h                   |    3 +
 drivers/gpu/drm/sis/sis_drv.c                     |    2 +-
 drivers/gpu/drm/udl/udl_drv.c                     |   15 +++-
 drivers/gpu/drm/via/via_map.c                     |    3 +-
 drivers/net/ethernet/intel/e1000e/82571.c         |    3 +-
 drivers/net/ethernet/intel/e1000e/netdev.c        |    8 --
 drivers/net/wireless/iwlwifi/iwl-6000.c           |   23 ++++-
 drivers/net/wireless/iwlwifi/iwl-eeprom.c         |   18 ++--
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h |    2 +-
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c  |   20 +++--
 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c     |    4 +-
 drivers/pci/pci.c                                 |    5 ++
 drivers/pci/quirks.c                              |   26 ++++++
 drivers/remoteproc/omap_remoteproc.c              |    2 +-
 drivers/remoteproc/remoteproc_core.c              |   10 ++-
 drivers/scsi/mpt2sas/mpt2sas_base.c               |    2 +-
 drivers/target/target_core_alua.c                 |    8 +-
 drivers/tty/hvc/hvc_xen.c                         |   31 ++++---
 drivers/usb/class/cdc-acm.c                       |    8 ++
 drivers/usb/class/cdc-wdm.c                       |    9 ++
 drivers/usb/core/hcd-pci.c                        |    9 --
 drivers/usb/core/message.c                        |    3 +-
 drivers/usb/host/ehci-hcd.c                       |    2 +
 drivers/usb/host/ehci-pci.c                       |    8 --
 drivers/usb/host/xhci-mem.c                       |   74 ++++++----------
 drivers/usb/host/xhci.c                           |    8 +-
 drivers/usb/musb/davinci.c                        |    1 +
 drivers/usb/musb/davinci.h                        |    4 +-
 drivers/usb/musb/musb_gadget.c                    |    1 +
 drivers/usb/serial/cp210x.c                       |    1 +
 drivers/usb/serial/ftdi_sio.c                     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h                 |    1 +
 drivers/usb/serial/mct_u232.c                     |   13 +--
 drivers/usb/serial/mos7840.c                      |    2 +-
 drivers/usb/serial/option.c                       |   96 ++++++++++-----------
 drivers/usb/serial/qcserial.c                     |    6 ++
 drivers/usb/serial/sierra.c                       |    4 +
 drivers/usb/serial/usb-serial.c                   |    6 +-
 drivers/usb/storage/unusual_devs.h                |    7 ++
 fs/hfsplus/ioctl.c                                |    9 +-
 fs/hfsplus/wrapper.c                              |    2 +-
 fs/nfs/nfs4proc.c                                 |    1 +
 fs/nfsd/nfs4state.c                               |    4 +-
 include/linux/pci.h                               |    2 +
 include/linux/swapops.h                           |    8 +-
 include/linux/usb/hcd.h                           |    2 -
 kernel/panic.c                                    |    4 +-
 kernel/time/ntp.c                                 |    2 +-
 kernel/trace/trace.c                              |    2 +-
 mm/swapfile.c                                     |   12 +--
 net/9p/trans_virtio.c                             |    2 +-
 net/sunrpc/rpc_pipe.c                             |   12 +--
 net/sunrpc/svc.c                                  |    3 +-
 sound/soc/codecs/wm8904.c                         |   13 +--
 69 files changed, 385 insertions(+), 248 deletions(-)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sascha Hauer <[email protected]>

commit cdd781ab1906d039c2a93078385645d2d5af8491 upstream.

MX53_DPLL4_BASE accidently returned the base address of PLL3. Fix this.

---
 arch/arm/mach-imx/crm-regs-imx5.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shawn Guo <[email protected]>

commit 602bf40971d7f9a1ec0b7ba2b7e6427849828651 upstream.

There is a system hang issue on imx6q which can easily be seen with running a cpu hotplug stress testing (hotplug secondary cores from user space via sysfs interface for thousands iterations).

It turns out that the issue is caused by coherency of the cpu that is being shut down. When shutting down a cpu, we need to have the cpu exit coherency to prevent it from receiving cache, TLB, or BTB maintenance operations broadcast by other CPUs in the cluster.

Copy cpu_enter_lowpower() and cpu_leave_lowpower() from mach-vexpress to have coherency properly handled in platform_cpu_die(), thus fix the issue.

---
 arch/arm/mach-imx/hotplug.c |   42 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)

@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *

@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
 	cpu_do_idle();
+	cpu_leave_lowpower();
 
 	/* We should never return from idle */
 	panic("cpu %d unexpectedly exit from shutdown\n", cpu);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jaccon Bastiaansen <[email protected]>

commit 350ab15bb2ffe7103bc6bf6c634f3c5b286eaf2a upstream.

The statically defined I/O memory regions for the i.MX21 on chip peripherals and the on board I/O peripherals of the i.MX21ADS board overlap. This results in a kernel crash during startup. This is fixed by reducing the memory range for the on board I/O peripherals to the actually required range.

---
 arch/arm/mach-imx/mach-mx21ads.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <[email protected]>

commit 6b4e0a93ff6e45714c72bdce193f719ed94810e3 upstream.

This reverts commit 092945e11c5b84f66dd08f0b87fb729715d377bc.

This commit prevents a DP screen from properly training the link. Oddly enough it works, once the machine has been warm-booted with an older kernel.

According to DP docs this _should_ have been the right precharge time. Also, the commit that originally introduces this was just general snb DP enabling and didn't mention any specific reason for this special value. Whatever, trust the reporter that this makes things worse and let's just revert it.

v2: Less spelling fail.

---
 drivers/gpu/drm/i915/intel_dp.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

@@ -368,7 +368,7 @@ intel_dp_aux_ch(struct intel_dp *intel_d
 	int recv_bytes;
 	uint32_t status;
 	uint32_t aux_clock_divider;
-	int try, precharge = 5;
+	int try, precharge;
 
 	intel_dp_check_edp(intel_dp);
 	/* The clock divider is based off the hrawclk,

@@ -388,6 +388,11 @@ intel_dp_aux_ch(struct intel_dp *intel_d
 	else
 		aux_clock_divider = intel_hrawclk(dev) / 2;
 
+	if (IS_GEN6(dev))
+		precharge = 3;
+	else
+		precharge = 5;
+
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
 		status = I915_READ(ch_ctl);

Though I'd be fascinated to know how and why the original sandybridge-enable code was right despite the documentation being wrong.

- ajax

Thanks, I've added this to the patch.

greg k-h

Hi Greg,

If you think it is important enough, you can add my

At any rate, thank you!

Thanks

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Deucher <[email protected]>

commit b866d1334ba2d544bc575d75357dea6bdcdc7f46 upstream.

- SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.

---
 drivers/gpu/drm/radeon/evergreen.c  |    3 +++
 drivers/gpu/drm/radeon/evergreend.h |    1 +
 drivers/gpu/drm/radeon/r600.c       |    1 +
 drivers/gpu/drm/radeon/r600d.h      |    1 +
 drivers/gpu/drm/radeon/rv770.c      |    5 ++++-
 drivers/gpu/drm/radeon/rv770d.h     |    3 +++
 6 files changed, 13 insertions(+), 1 deletion(-)

@@ -2210,6 +2210,9 @@ static void evergreen_gpu_init(struct ra
 	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
 	WREG32(SMX_DC_CTL0, smx_dc_ctl0);
 
+	if (rdev->family <= CHIP_SUMO2)
+		WREG32(SMX_SAR_CTL0, 0x00010000);
+
 	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
 					POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
 					SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));

@@ -273,6 +273,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		NUMBER_OF_SETS(x)				((x) << 1)

@@ -1906,6 +1906,7 @@ void r600_gpu_init(struct radeon_device
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 			       NUM_CLIP_SEQ(3)));
 	WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+	WREG32(VC_ENHANCE, 0);
 }
 
 

@@ -483,6 +483,7 @@
 #define		TC_L2_SIZE(x)					((x)<<5)
 #define		L2_DISABLE_LATE_HIT				(1<<9)
 
+#define	VC_ENHANCE					0x9714
 
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)

@@ -782,6 +782,9 @@ static void rv770_gpu_init(struct radeon
 				       ACK_FLUSH_CTL(3) |
 				       SYNC_FLUSH_CTL));
 
+	if (rdev->family != CHIP_RV770)
+		WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
 	db_debug3 = RREG32(DB_DEBUG3);
 	db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
 	switch (rdev->family) {

@@ -960,7 +963,7 @@ static void rv770_gpu_init(struct radeon
 
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 					  NUM_CLIP_SEQ(3)));
-
+	WREG32(VC_ENHANCE, 0);
 }
 
 void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)

@@ -208,6 +208,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		CACHE_DEPTH(x)					((x) << 1)

@@ -307,6 +308,8 @@
 #define	TCP_CNTL					0x9610
 #define	TCP_CHAN_STEER					0x9614
 
+#define	VC_ENHANCE					0x9714
+
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
 #define			VC_ONLY						0

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Márton Németh <[email protected]>

commit ce020ea53264f1460ae619cfc12f968dbd0b8974 upstream.

The field obejct_idr of struct drm_via_private was introduced with the
commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=77ee8f3825054f23b17e9c8f728f061defd86cdc . In that patch idr_init(&dev->object_name_idr) was called instead of
idr_init(&dev_priv->object_idr) by mistake, leaving the dev_priv->object_idr
uninitialized. To be more exact, the object_idr buffer is filled with zeros
because of kzalloc(), but the dev_priv->object_idr.lock spinlock can cause
system freeze at lib/idr.c:move_to_free_list() when spin_lock_irqsave()
is called on this spinlock.

The patch was tested on Clevo D4J, model D410J laptop, on the following hardware, without AGP kernel module loaded:

  # lspci -s 01:00.0 -n
  01:00.0 0300: 1106:3108 (rev 01)
  # lspci -s 01:00.0 -v
  01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
          Subsystem: CLEVO/KAPOK Computer Device 4702
          Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
          Memory at f0000000 (32-bit, prefetchable) [size=64M]
          Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
          Expansion ROM at <unassigned> [disabled]
          Capabilities: [60] Power Management version 2
          Capabilities: [70] AGP version 3.0

---
 drivers/gpu/drm/via/via_map.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -100,12 +100,11 @@ int via_driver_load(struct drm_device *d
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
+	idr_init(&dev_priv->object_idr);
 	dev->dev_private = (void *)dev_priv;
 
 	dev_priv->chipset = chipset;
 
-	idr_init(&dev->object_name_idr);
-
 	pci_set_master(dev->pdev);
 
 	ret = drm_vblank_init(dev, 1);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Airlie <[email protected]>

commit e5a867a51d9b009f90d5dca6a320608e4e8a37ec upstream.

This is ported from udlfb.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=832188

---
 drivers/gpu/drm/udl/udl_drv.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

@@ -13,8 +13,21 @@
 
 static struct drm_driver driver;
 
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
 static struct usb_device_id id_table[] = {
-	{.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+	{.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+	 .bInterfaceSubClass = 0x00,
+	 .bInterfaceProtocol = 0x00,
+	 .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+			USB_DEVICE_ID_MATCH_INT_CLASS |
+			USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+			USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, id_table);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Márton Németh <[email protected]>

commit 648ccc7d35e3416fdc739d2e520e85de3125361b upstream.

The filed object_idr of struct drm_sis_private was introduced with
commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=6de8a748881f1cd9d795454da2b6db616d5ca3d7 .

The idr_init(&dev->object_name_idr) is called instead of idr_init(&dev_priv->object_idr) by mistake, leaving object_idr uninitialized. Correct this.

This patch was not tested because of lack of hardware.

---
 drivers/gpu/drm/sis/sis_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -47,9 +47,9 @@ static int sis_driver_load(struct drm_de
 	if (dev_priv == NULL)
 		return -ENOMEM;
 
+	idr_init(&dev_priv->object_idr);
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->chipset = chipset;
-	idr_init(&dev->object_name_idr);
 
 	return 0;
 }

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <[email protected]>

commit 2e5ad6b9c45d43cc4e7b8ac5ded1c55a7c4a3893 upstream.

All of the error paths are doing the same logic. In which case we might as well collapse them in one path.

---
 drivers/tty/hvc/hvc_xen.c |   21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

@@ -216,22 +216,16 @@ static int xen_hvm_console_init(void)
 		return 0;
 
 	r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
-	if (r < 0) {
-		kfree(info);
-		return -ENODEV;
-	}
+	if (r < 0)
+		goto err;
 	info->evtchn = v;
 	hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
-	if (r < 0) {
-		kfree(info);
-		return -ENODEV;
-	}
+	if (r < 0)
+		goto err;
 	mfn = v;
 	info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
-	if (info->intf == NULL) {
-		kfree(info);
-		return -ENODEV;
-	}
+	if (info->intf == NULL)
+		goto err;
 	info->vtermno = HVC_COOKIE;
 
 	spin_lock(&xencons_lock);

@@ -239,6 +233,9 @@ static int xen_hvm_console_init(void)
 	spin_unlock(&xencons_lock);
 
 	return 0;
+err:
+	kfree(info);
+	return -ENODEV;
 }
 
 static int xen_pv_console_init(void)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <[email protected]>

commit a32c88b9386ce3df87f28dd46bdc3776cd6edf75 upstream.

We weren't resetting the parameter to be passed in to a known default. Nor were we checking the return value of hvm_get_parameter.

---
 drivers/tty/hvc/hvc_xen.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -219,7 +219,8 @@ static int xen_hvm_console_init(void)
 	if (r < 0)
 		goto err;
 	info->evtchn = v;
-	hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
+	v = 0;
+	r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
 	if (r < 0)
 		goto err;
 	mfn = v;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <[email protected]>

commit 5842f5768599094758931b74190cdf93641a8e35 upstream.

We need to make sure that those parameters are setup to be correct. As such the value of 0 is deemed invalid and we find that we bail out. The hypervisor sets by default all of them to be zero and when the hypercall is done does a simple:

a.value = d->arch.hvm_domain.params[a.index];

Which means that if the Xen toolstack forgot to setup the proper HVM_PARAM_CONSOLE_EVTCHN (or the PFN one), we would get the default value of 0 and use that.

Fixes-Oracle-Bug: 14091238

---
 drivers/tty/hvc/hvc_xen.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

@@ -214,14 +214,19 @@ static int xen_hvm_console_init(void)
 	/* already configured */
 	if (info->intf != NULL)
 		return 0;
-
+	/*
+	 * If the toolstack (or the hypervisor) hasn't set these values, the
+	 * default value is 0. Even though mfn = 0 and evtchn = 0 are
+	 * theoretically correct values, in practice they never are and they
+	 * mean that a legacy toolstack hasn't initialized the pv console correctly.
+	 */
 	r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
-	if (r < 0)
+	if (r < 0 || v == 0)
 		goto err;
 	info->evtchn = v;
 	v = 0;
 	r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
-	if (r < 0)
+	if (r < 0 || v == 0)
 		goto err;
 	mfn = v;
 	info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andre Przywara <[email protected]>

commit 5e626254206a709c6e937f3dda69bf26c7344f6f upstream.

Xen PV kernels allow access to the APERF/MPERF registers to read the effective frequency. Access to the MSRs is however redirected to the currently scheduled physical CPU, making consecutive read and compares unreliable. In addition each rdmsr traps into the hypervisor. So to avoid bogus readouts and expensive traps, disable the kernel internal feature flag for APERF/MPERF if running under Xen. This will
a) remove the aperfmperf flag from /proc/cpuinfo
b) not mislead the power scheduler (arch/x86/kernel/cpu/sched.c) to use the feature to improve scheduling (by default disabled)
c) not mislead the cpufreq driver to use the MSRs

This does not cover userland programs which access the MSRs via the device file interface, but this will be addressed separately.

---
 arch/x86/xen/enlighten.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -207,6 +207,9 @@ static void __init xen_banner(void)
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 

@@ -240,6 +243,11 @@ static void xen_cpuid(unsigned int *ax,
 		*dx = cpuid_leaf5_edx_val;
 		return;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit b3b02ae5865c2dcd506322e0fc6def59a042e72f upstream.

If the call to svc_process_common() fails, then the request needs to be freed before we can exit bc_svc_process.

---
 net/sunrpc/svc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1379,7 +1379,8 @@ bc_svc_process(struct svc_serv *serv, st
 						sizeof(req->rq_snd_buf));
 		return bc_send(req);
 	} else {
-		/* Nothing to do to drop request */
+		/* drop request */
+		xprt_free_bc_request(req);
 		return 0;
 	}
 }

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 2d0dbc6ae8a5194aaecb9cfffb9053f38fce8b86 upstream.

While nfs4_do_open() expects the fmode argument to be restricted to combinations of FMODE_READ and FMODE_WRITE, both nfs4_atomic_open() and nfs4_proc_create will pass the nfs_open_context->mode, which contains the full fmode_t.

This patch ensures that nfs4_do_open strips the other fmode_t bits, fixing a problem in which the nfs4_do_open call would result in an unnecessary delegation return.

---
 fs/nfs/nfs4proc.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1861,6 +1861,7 @@ static struct nfs4_state *nfs4_do_open(s
 	struct nfs4_state *res;
 	int status;
 
+	fmode &= FMODE_READ|FMODE_WRITE;
 	do {
 		status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred, &res);
 		if (status == 0)

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <[email protected]>

commit bc2df47a408f2d64cf81bcfd0f6e3e14c84cb0ab upstream.

Most frequent symptom was a BUG triggering in expire_client, with the server locking up shortly thereafter.

Introduced by 508dc6e110c6dbdc0bbe84298ccfe22de7538486 "nfsd41:
free_session/free_client must be called under the client_lock".

---
 fs/nfsd/nfs4state.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -862,7 +862,7 @@ static void free_session(struct kref *kr
 	struct nfsd4_session *ses;
 	int mem;
 
-	BUG_ON(!spin_is_locked(&client_lock));
+	lockdep_assert_held(&client_lock);
 	ses = container_of(kref, struct nfsd4_session, se_ref);
 	nfsd4_del_conns(ses);
 	spin_lock(&nfsd_drc_lock);

@@ -1041,7 +1041,7 @@ static struct nfs4_client *alloc_client(
 static inline void
 free_client(struct nfs4_client *clp)
 {
-	BUG_ON(!spin_is_locked(&client_lock));
+	lockdep_assert_held(&client_lock);
 	while (!list_empty(&clp->cl_sessions)) {
 		struct nfsd4_session *ses;
 		ses = list_entry(clp->cl_sessions.next, struct nfsd4_session,

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <[email protected]>

commit f2bf1f6f5f89d031245067512449fc889b2f4bb2 upstream.

A recent update to have tracing_on/off() only affect the ftrace ring buffers instead of all ring buffers had a cut and paste error. The tracing_off() did the exact same thing as tracing_on() and would not actually turn off tracing. Unfortunately, tracing_off() is more important to be working than tracing_on() as this is a key development tool, as it lets the developer turn off tracing as soon as a problem is discovered. It is also used by panic and oops code.

This bug also breaks the 'echo func:traceoff > set_ftrace_filter'

---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -383,7 +383,7 @@ EXPORT_SYMBOL_GPL(tracing_on);
 void tracing_off(void)
 {
 	if (global_trace.buffer)
-		ring_buffer_record_on(global_trace.buffer);
+		ring_buffer_record_off(global_trace.buffer);
 	/*
 	 * This flag is only looked at when buffers haven't been
 	 * allocated yet. We don't really care about the race

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeff Layton <[email protected]>

commit 92123e068efa310b09e9943ac1cfd10ff6b6d2e4 upstream.

In the event that we don't have a dentry for a rpc_pipefs pipe, we still need to allow the queue_timeout job to clean out the queue. There's just no waitq to wake up in that event.

---
 net/sunrpc/rpc_pipe.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

@@ -71,7 +71,9 @@ static void rpc_purge_list(wait_queue_he
 		msg->errno = err;
 		destroy_msg(msg);
 	} while (!list_empty(head));
-	wake_up(waitq);
+
+	if (waitq)
+		wake_up(waitq);
 }
 
 static void

@@ -91,11 +93,9 @@ rpc_timeout_upcall_queue(struct work_str
 	}
 	dentry = dget(pipe->dentry);
 	spin_unlock(&pipe->lock);
-	if (dentry) {
-		rpc_purge_list(&RPC_I(dentry->d_inode)->waitq,
-			       &free_list, destroy_msg, -ETIMEDOUT);
-		dput(dentry);
-	}
+	rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
+			&free_list, destroy_msg, -ETIMEDOUT);
+	dput(dentry);
 }
 
 ssize_t rpc_pipe_generic_upcall(struct file *filp, struct rpc_pipe_msg *msg,

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

commit a2c658505bf5c75516ee0a79287223e86a2474af upstream.

When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id(). This is because smp_processor_id() is not called in preempt safe condition.

To fix this issue, use raw_smp_processor_id instead of smp_processor_id.

---
 drivers/scsi/mpt2sas/mpt2sas_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1785,7 +1785,7 @@ static inline void _base_writeq(__u64 b,
 static inline u8
 _base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
 {
-	return ioc->cpu_msix_table[smp_processor_id()];
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
 }
 
 /**

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <[email protected]>

commit 9b15b817f3d62409290fd56fe3cbb076a931bb0a upstream.

Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM.

Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated.

Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header().

This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now.

Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next.

---
 include/linux/swapops.h |    8 +++++---
 mm/swapfile.c           |   12 ++++--------
 2 files changed, 9 insertions(+), 11 deletions(-)

@@ -9,13 +9,15 @@
  * get good packing density in that tree, so the index should be dense in
  * the low-order bits.
  *
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
  * high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits.  Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
  *
  * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
  */
-#define SWP_TYPE_SHIFT(e)	(sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
+			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
 #define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
 
 /*

@@ -1924,24 +1924,20 @@ static unsigned long read_swap_header(st
 
 	/*
 	 * Find out how many pages are allowed for a single swap
-	 * device. There are three limiting factors: 1) the number
+	 * device. There are two limiting factors: 1) the number
 	 * of bits for the swap offset in the swp_entry_t type, and
 	 * 2) the number of bits in the swap pte as defined by the
-	 * the different architectures, and 3) the number of free bits
-	 * in an exceptional radix_tree entry. In order to find the
+	 * different architectures. In order to find the
 	 * largest possible bit mask, a swap entry with swap type 0
 	 * and swap offset ~0UL is created, encoded to a swap pte,
 	 * decoded to a swp_entry_t again, and finally the swap
 	 * offset is extracted. This will mask all the bits from
 	 * the initial ~0UL mask that can't be encoded in either
 	 * the swp_entry_t or the architecture definition of a
-	 * swap pte.  Then the same is done for a radix_tree entry.
+	 * swap pte.
 	 */
 	maxpages = swp_offset(pte_to_swp_entry(
-			swp_entry_to_pte(swp_entry(0, ~0UL))));
-	maxpages = swp_offset(radix_to_swp_entry(
-			swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+			swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
 	if (maxpages > swap_header->info.last_page) {
 		maxpages = swap_header->info.last_page + 1;
 		/* p->max is an unsigned int: don't overflow it */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream.

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -150,6 +150,7 @@ static void option_instat_callback(struc
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB

@@ -666,6 +667,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Bird <[email protected]>

commit 42ca7da1c2363dbef4ba1b6917c4c02274b6a5e2 upstream.

Later firmwares for this device now have proper subclass and protocol info so we can identify it nicely without needing to use the blacklist. I'm not removing the old 0xff matching as there may be devices in the field that still need that.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -667,6 +667,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?=E8=AF=B4=E4=B8=8D=E5=BE=97?= <[email protected]>

commit 0ef0be15fd2564767f114c249fc4af704d8e16f4 upstream.

---
 drivers/usb/serial/option.c |   42 ++++++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 16 deletions(-)

@@ -426,7 +426,7 @@ static void option_instat_callback(struc
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
 
-/* YUGA products  www.yuga-info.com*/
+/* YUGA products  www.yuga-info.com [email protected] */
 #define YUGA_VENDOR_ID				0x257A
 #define YUGA_PRODUCT_CEM600			0x1601
 #define YUGA_PRODUCT_CEM610			0x1602

@@ -443,6 +443,8 @@ static void option_instat_callback(struc
 #define YUGA_PRODUCT_CEU516			0x160C
 #define YUGA_PRODUCT_CEU528			0x160D
 #define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
 
 #define YUGA_PRODUCT_CWM600			0x2601
 #define YUGA_PRODUCT_CWM610			0x2602

@@ -458,23 +460,26 @@ static void option_instat_callback(struc
 #define YUGA_PRODUCT_CWU518			0x260B
 #define YUGA_PRODUCT_CWU516			0x260C
 #define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
 #define YUGA_PRODUCT_CWU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
 
-#define YUGA_PRODUCT_CLM600			0x2601
-#define YUGA_PRODUCT_CLM610			0x2602
-#define YUGA_PRODUCT_CLM500			0x2603
-#define YUGA_PRODUCT_CLM510			0x2604
-#define YUGA_PRODUCT_CLM800			0x2605
-#define YUGA_PRODUCT_CLM900			0x2606
-
-#define YUGA_PRODUCT_CLU718			0x2607
-#define YUGA_PRODUCT_CLU716			0x2608
-#define YUGA_PRODUCT_CLU728			0x2609
-#define YUGA_PRODUCT_CLU726			0x260A
-#define YUGA_PRODUCT_CLU518			0x260B
-#define YUGA_PRODUCT_CLU516			0x260C
-#define YUGA_PRODUCT_CLU528			0x260D
-#define YUGA_PRODUCT_CLU526			0x260F
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
+
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
 
 /* Viettel products */
 #define VIETTEL_VENDOR_ID			0x2262

@@ -1215,6 +1220,11 @@ static const struct usb_device_id option
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

commit b9c3aab315b51f81649a0d737c4c73783fbd8de0 upstream.

Fix memory leak introduced by commit 383cedc3bb435de7a2 ("USB: serial:
full autosuspend support for the option driver") which allocates usb-serial data but never frees it.

---
 drivers/usb/serial/option.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 

@@ -1273,7 +1274,7 @@ static struct usb_serial_driver option_1
 	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
-	.release           = usb_wwan_release,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
 	.suspend           = usb_wwan_suspend,

@@ -1384,6 +1385,15 @@ static int option_probe(struct usb_seria
 	return 0;
 }
 
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+
+	kfree(priv);
+}
+
 static void option_instat_callback(struct urb *urb)
 {
 	int err;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

commit 4273f9878b0a8271df055e3c8f2e7f08c6a4a2f4 upstream.

Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct...

---
 drivers/usb/serial/option.c |   34 +++-------------------------------
 1 file changed, 3 insertions(+), 31 deletions(-)

@@ -1288,35 +1288,6 @@ static struct usb_serial_driver * const
 
 static bool debug;
 
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
-	/* Input endpoints and buffer for this port */
-	struct urb *in_urbs[N_IN_URB];
-	u8 *in_buffer[N_IN_URB];
-	/* Output endpoints and buffer for this port */
-	struct urb *out_urbs[N_OUT_URB];
-	u8 *out_buffer[N_OUT_URB];
-	unsigned long out_busy;		/* Bit vector of URBs in use */
-	int opened;
-	struct usb_anchor delayed;
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-
-	unsigned long tx_start_time[N_OUT_URB];
-};
-
 module_usb_serial_driver(option_driver, serial_drivers);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,

@@ -1399,7 +1370,8 @@ static void option_instat_callback(struc
 	int err;
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
-	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);

@@ -1460,7 +1432,7 @@ static int option_send_setup(struct usb_
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_intf_private *intfdata =
 		(struct usb_wwan_intf_private *) serial->private;
-	struct option_port_private *portdata;
+	struct usb_wwan_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Seiji Aguchi <[email protected]>

commit 62be73eafaa045d3233337303fb140f7f8a61135 upstream.

This patch moves kmsg_dump(KMSG_DUMP_PANIC) below smp_send_stop(), to serialize the crash-logging process via smp_send_stop() and to thus retrieve a more stable crash image of all CPUs stopped.

---
 kernel/panic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -108,8 +108,6 @@ void panic(const char *fmt, ...)
 	 */
 	crash_kexec(NULL);
 
-	kmsg_dump(KMSG_DUMP_PANIC);
-
 	/*
 	 * Note smp_send_stop is the usual smp shutdown function, which
 	 * unfortunately means it may not be hardened to work in a panic

@@ -117,6 +115,8 @@ void panic(const char *fmt, ...)
 	 */
 	smp_send_stop();
 
+	kmsg_dump(KMSG_DUMP_PANIC);
+
 	atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
 
 	bust_spinlocks(0);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janne Kalliomäki <[email protected]>

commit a6dc8c04218eb752ff79cdc24a995cf51866caed upstream.

The variable io_size was unsigned int, which caused the wrong sector number to be calculated after aligning it. This then caused mount to fail with big volumes, as backup volume header information was searched from a wrong sector.

---
 fs/hfsplus/wrapper.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -56,7 +56,7 @@ int hfsplus_submit_bio(struct super_bloc
 	DECLARE_COMPLETION_ONSTACK(wait);
 	struct bio *bio;
 	int ret = 0;
-	unsigned int io_size;
+	u64 io_size;
 	loff_t start;
 	int offset;
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <[email protected]>

commit 7dea9665fee828fb56db3bae5b9685d9fa006d33 upstream.

HFS+ doesn't really implement hard links - instead, hardlinks are indicated by a magic file type which refers to an indirect node in a hidden directory. The spec indicates that stat() should return the inode number of the indirect node, but it turns out that this doesn't satisfy the firmware when it's looking for a bootloader - it wants the catalog ID of the hardlink file instead. Fix up this case.

---
 fs/hfsplus/ioctl.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -31,6 +31,7 @@ static int hfsplus_ioctl_bless(struct fi
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
 	struct hfsplus_vh *vh = sbi->s_vhdr;
 	struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+	u32 cnid = (unsigned long)dentry->d_fsdata;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;

@@ -41,8 +42,12 @@ static int hfsplus_ioctl_bless(struct fi
 	vh->finder_info[0] = bvh->finder_info[0] =
 		cpu_to_be32(parent_ino(dentry));
 
-	/* Bootloader */
-	vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+	/*
+	 * Bootloader. Just using the inode here breaks in the case of
+	 * hard links - the firmware wants the ID of the hard link file,
+	 * but the inode points at the indirect inode
+	 */
+	vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
 
 	/* Per spec, the OS X system folder - same as finder_info[0] here */
 	vh->finder_info[5] = bvh->finder_info[5] =

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <[email protected]>

commit f948501b36c6b3d9352ce212a197098a7e958971 upstream.

At present, hard_irq_disable() does nothing on powerpc because of this code in include/linux/interrupt.h:

    #ifndef hard_irq_disable
    #define hard_irq_disable()      do { } while(0)
    #endif

So we need to make our hard_irq_disable be a macro. It was previously a macro until commit 7230c56441 ("powerpc: Rework lazy-interrupt handling") changed it to a static inline function.

--

 arch/powerpc/include/asm/hw_irq.h |    3 +++
 1 file changed, 3 insertions(+)

@@ -99,6 +99,9 @@ static inline void hard_irq_disable(void
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
 }
 
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable	hard_irq_disable
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts when soft-disabled after having

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 46ed8f00d8982e49f8fe2c1a9cea192f640cb3ba upstream.

xhci_free_tt_info() may access the invalid memory when it removes the last entry but the list is not empty. Then tt_next reaches to the list head but it still tries to check the tt_info of that entry.

This patch fixes the bug and cleans up the messy code by rewriting with a simple list_for_each_entry_safe().

This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs."

---
 drivers/usb/host/xhci-mem.c |   39 ++++++++++-----------------------------
 1 file changed, 10 insertions(+), 29 deletions(-)

@@ -793,10 +793,9 @@ static void xhci_free_tt_info(struct xhc
 		struct xhci_virt_device *virt_dev,
 		int slot_id)
 {
-	struct list_head *tt;
 	struct list_head *tt_list_head;
-	struct list_head *tt_next;
-	struct xhci_tt_bw_info *tt_info;
+	struct xhci_tt_bw_info *tt_info, *next;
+	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
 	 * it may not have the real_port set correctly.

@@ -808,34 +807,16 @@ static void xhci_free_tt_info(struct xhc
 	}
 
 	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
-	if (list_empty(tt_list_head))
-		return;
-
-	list_for_each(tt, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		if (tt_info->slot_id == slot_id)
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* Multi-TT hubs will have more than one entry */
+		if (tt_info->slot_id == slot_id) {
+			slot_found = true;
+			list_del(&tt_info->tt_list);
+			kfree(tt_info);
+		} else if (slot_found) {
 			break;
+		}
 	}
-	/* Cautionary measure in case the hub was disconnected before we
-	 * stored the TT information.
-	 */
-	if (tt_info->slot_id != slot_id)
-		return;
-
-	tt_next = tt->next;
-	tt_info = list_entry(tt, struct xhci_tt_bw_info,
-			tt_list);
-	/* Multi-TT hubs will have more than one entry */
-	do {
-		list_del(tt);
-		kfree(tt_info);
-		tt = tt_next;
-		if (list_empty(tt_list_head))
-			break;
-		tt_next = tt->next;
-		tt_info = list_entry(tt, struct xhci_tt_bw_info,
-				tt_list);
-	} while (tt_info->slot_id == slot_id);
 }
 
 int xhci_alloc_tt_info(struct xhci_hcd *xhci,

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 32f1d2c536d0c26c5814cb0e6a0606c42d02fac1 upstream.

This patch fixes a few issues introduced in the recent fix [f8a9e72d: USB: fix resource leak in xhci power loss path]

- The endpoints listed in bw table are just links and each entry is an array member of dev->eps[]. But the commit above adds a kfree() call to these instances, and thus it results in memory corruption.

- It clears only the first entry of rh_bw[], but there can be multiple ports.

- It'd be safer to clear the list_head of ep as well, not only removing from the list, as it's checked in xhci_discover_or_reset_device().

This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs."

---
 drivers/usb/host/xhci-mem.c |   35 ++++++++++++++---------------------
 1 file changed, 14 insertions(+), 21 deletions(-)

@@ -1772,17 +1772,9 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
-	struct list_head *tt_list_head;
-	struct list_head *tt;
-	struct list_head *endpoints;
-	struct list_head *ep, *q;
-	struct xhci_tt_bw_info *tt_info;
-	struct xhci_interval_bw_table *bwt;
-	struct xhci_virt_ep *virt_ep;
-
 	unsigned long	flags;
 	int size;
-	int i;
+	int i, j, num_ports;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);

@@ -1839,21 +1831,22 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	bwt = &xhci->rh_bw->bw_table;
-	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
-		endpoints = &bwt->interval_bw[i].endpoints;
-		list_for_each_safe(ep, q, endpoints) {
-			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
-			list_del(&virt_ep->bw_endpoint_list);
-			kfree(virt_ep);
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
 		}
 	}
 
-	tt_list_head = &xhci->rh_bw->tts;
-	list_for_each_safe(tt, q, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		list_del(tt);
-		kfree(tt_info);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_tt_bw_info *tt, *n;
+		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+			list_del(&tt->tt_list);
+			kfree(tt);
+		}
 	}
 
 	xhci->num_usb2_ports = 0;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andiry Xu <[email protected]>

commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream.

When system software decides to power down the xHC with the intent of resuming operation at a later time, it will ask xHC to save the internal state and restore it when resume to correctly recover from a power event. Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore State flag in the USBCMD register and wait for the Save/Restore State Status flag in the USBSTS register to transition to '0'". However, it does not define how long software should wait for the SSS/RSS bit to transition to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller to save/restore the state successfully. Increase the timeout to 10ms helps to resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation"

---
 drivers/usb/host/xhci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
-		xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}

@@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
 		if (handshake(xhci, &xhci->op_regs->status,
-			      STS_RESTORE, 0, 10*100)) {
-			xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+			      STS_RESTORE, 0, 10 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
 			return -ETIMEDOUT;
 		}

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede <[email protected]>

commit afff07e61a5243e14ee3f0a272a0380cd744a8a3 upstream.

This device gives a bogus answer to get_capacity(16):

[ 8628.278614] scsi 8:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[ 8628.279452] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 8628.280338] sd 8:0:0:0: [sdd] 35747322042253313 512-byte logical blocks: (18.3 EB/15.8 EiB)

So set the quirk flag to avoid using get_capacity(16) with it:

[11731.386014] usb-storage 2-1.6:1.0: Quirks match for vid 090c pid 1000: 80000
[11731.386075] scsi9 : usb-storage 2-1.6:1.0
[11731.386172] usbcore: registered new interface driver usb-storage
[11731.386175] USB Mass Storage support registered.
[11732.387394] scsi 9:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[11732.388462] sd 9:0:0:0: Attached scsi generic sg3 type 0
[11732.389432] sd 9:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)

Which makes the capacity look a lot more sane :)

---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -1107,6 +1107,13 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
+/* Feiya QDI U2 DISK, reported by Hans de Goede <[email protected]> */
+UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
+		"Feiya",
+		"QDI U2 DISK",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_CAPACITY_16 ),
+
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tony Zelenoff <[email protected]>

commit b9c87663eead64c767e72a373ae6f8a94bead459 upstream.

The __devinitconst section can't be referenced from usb_serial_device structure. Thus removed it as it done in other mos* device drivers.

Error itself:
WARNING: drivers/usb/serial/mos7840.o(.data+0x8): Section mismatch in reference from the variable moschip7840_4port_device to the variable .devinit.rodata:id_table
The variable moschip7840_4port_device references
the variable __devinitconst id_table

[v2] no attach now

---
 drivers/usb/serial/mos7840.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -206,7 +206,7 @@ static const struct usb_device_id moschi
 	{}			/* terminating entry */
 };
 
-static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
+static const struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit c41444ccfa33a1c20efa319e554cb531576e64a2 upstream.

Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless.

---
 drivers/usb/serial/qcserial.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -105,7 +105,13 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Cox <[email protected]>

commit 1aa3c63cf0a79153ee13c8f82e4eb6c40b66a161 upstream.

The low level helper returns 1 on success. The ioctl should however return
0. As this is the only user of the helper return, make the helper return 0 or an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009

---
 drivers/usb/serial/mct_u232.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

@@ -317,13 +317,16 @@ static int mct_u232_set_modem_ctrl(struc
 			MCT_U232_SET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0)
-		dev_err(&serial->dev->dev,
-			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+	kfree(buf);
+
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-	kfree(buf);
-	return rc;
+	if (rc < 0) {
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
 } /* mct_u232_set_modem_ctrl */
 
 static int mct_u232_get_modem_stat(struct usb_serial *serial,

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jon Povey <[email protected]>

commit 6594b2d7b1ef8260e6e36ddc96bd37a40e39ba80 upstream.

This appears to have been broken by
commit 5cfb19ac604a68c030b245561f575c2d1bac1d49
(ARM: davinci: streamline sysmod access)

For now, fix by hardcoding USB_PHY_CTRL and DM355_DEEPSLEEP

Tested on DM365 with defconfig changes.

---
 drivers/usb/musb/davinci.c |    1 +
 drivers/usb/musb/davinci.h |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 
 #include <mach/cputype.h>
+#include <mach/hardware.h>
 
 #include <asm/mach-types.h>
 

@@ -15,7 +15,7 @@
  */
 
 /* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR	0x01c40034
 #define USBPHY_DATAPOL		BIT(11)	/* (dm355) switch D+/D- */
 #define USBPHY_PHYCLKGD		BIT(8)
 #define USBPHY_SESNDEN		BIT(7)	/* v(sess_end) comparator */

@@ -27,7 +27,7 @@
 #define USBPHY_OTGPDWN		BIT(1)
 #define USBPHY_PHYPDWN		BIT(0)
 
-#define DM355_DEEPSLEEP_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR	0x01c40048
 #define DRVVBUS_FORCE		BIT(2)
 #define DRVVBUS_OVERRIDE	BIT(1)
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <[email protected]>

commit 08f75bf14fadaa81fe362d5acda9b77b113dd0a2 upstream.

usb_ep_ops.disable must clear external copy of the endpoint descriptor, otherwise musb crashes after loading/unloading several gadget modules in a row:

Unable to handle kernel paging request at virtual address bf013730
pgd = c0004000
[bf013730] *pgd=8f26d811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1]
Modules linked in: g_cdc [last unloaded: g_file_storage]
CPU: 0    Not tainted  (3.2.17 #647)
PC is at musb_gadget_enable+0x4c/0x24c
LR is at _raw_spin_lock_irqsave+0x4c/0x58
[<c027c030>] (musb_gadget_enable+0x4c/0x24c) from [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc])
[<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) from [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc])
[<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) from [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc])
[<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) from [<c027b744>] (musb_g_ep0_irq+0x844/0x924)
[<c027b744>] (musb_g_ep0_irq+0x844/0x924) from [<c027a97c>] (musb_interrupt+0x79c/0x864)
[<c027a97c>] (musb_interrupt+0x79c/0x864) from [<c027aaa8>] (generic_interrupt+0x64/0x7c)
[<c027aaa8>] (generic_interrupt+0x64/0x7c) from [<c00797cc>] (handle_irq_event_percpu+0x28/0x178)

...

---
 drivers/usb/musb/musb_gadget.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1232,6 +1232,7 @@ static int musb_gadget_disable(struct us
 	}
 
 	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
 
 	/* abort all pending DMA and requests */
 	nuke(musb_ep, -ESHUTDOWN);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ricardo Martins <[email protected]>

commit 4f7a67e2dd49fbfba002c453bc24bf00e701cc71 upstream.

After commit aaa0ef289afe9186f81e2340114ea413eef0492a "PS3 EHCI QH read work-around", Terratec Grabby (em28xx) stopped working with AMD Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only fix, the following patch adds a conditional block around it.

---
 drivers/usb/host/ehci-hcd.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd
 	hw = ehci->async->hw;
 	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
 	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
 	hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7));	/* I = 1 */
+#endif
 	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
 	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikko Tuumanen <[email protected]>

commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream.

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

@@ -82,6 +82,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Evan McNabb <[email protected]>

commit e00a54d772210d450e5c1a801534c3c8a448549f upstream.

Add support for RT Systems USB-RTS01 USB to Serial adapter:
http://www.rtsystemsinc.com/Photos/USBRTS01.html

Tested by controlling Icom IC-718 amateur radio transceiver via hamlib.

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

@@ -737,6 +737,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },

@@ -784,6 +784,7 @@
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
 
 
 /*

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream.

This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep.

The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs.

A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences:

The old patch added the flag at the USB level; this patch adds it at the PCI level.

The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information).

---
 drivers/pci/pci.c           |    5 +++++
 drivers/pci/quirks.c        |   26 ++++++++++++++++++++++++++
 drivers/usb/core/hcd-pci.c  |    9 ---------
 drivers/usb/host/ehci-pci.c |    8 --------
 include/linux/pci.h         |    2 ++
 include/linux/usb/hcd.h     |    2 --
 6 files changed, 33 insertions(+), 19 deletions(-)

@@ -1743,6 +1743,11 @@ int pci_prepare_to_sleep(struct pci_dev
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* Some devices mustn't be in D3 during system sleep */
+	if (target_state == PCI_D3hot &&
+			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+		return 0;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);

@@ -2917,6 +2917,32 @@ static void __devinit disable_igfx_irq(s
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+	const char *sys_info;
+	static const char good_Asus_board[] = "P8Z68-V";
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+		return;
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+		return;
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && memcmp(sys_info, good_Asus_board,
+			sizeof(good_Asus_board) - 1) == 0)
+		return;
+
+	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {

@@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.

@@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
-			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
-			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
-				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
-				hcd->broken_pci_sleep = 1;
-				device_set_wakeup_capable(&pdev->dev, false);
-			}
-		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {

@@ -176,6 +176,8 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+	/* Device causes system crash if in D3 during S3 sleep */
+	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {

@@ -126,8 +126,6 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
-	unsigned		broken_pci_sleep:1;	/* Don't put the
-			controller in PCI-D3 for system sleep */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit de102ef41f24a4c251c4a3838796bb27557d4d93 upstream.

---
 drivers/usb/class/cdc-wdm.c |    9 +++++++++
 1 file changed, 9 insertions(+)

@@ -55,6 +55,15 @@ static const struct usb_device_id wdm_id
 		.bInterfaceSubClass = 1,
 		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
 	},
+	{
+		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+				      USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Otto Meta <[email protected]>

commit 6c4707f3f8c44ec18282e1c014c80e1c257042f9 upstream.

Currently CDC-ACM devices stay throttled when their TTY is closed while throttled, stalling further communication attempts after the next open.

Unthrottling during open/activate got lost starting with kernel 3.0.0 and this patch reintroduces it.

---
 drivers/usb/class/cdc-acm.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -567,6 +567,14 @@ static int acm_port_activate(struct tty_
 
 	usb_autopm_put_interface(acm->control);
 
+	/*
+	 * Unthrottle device in case the TTY was closed while throttled.
+	 */
+	spin_lock_irq(&acm->read_lock);
+	acm->throttled = 0;
+	acm->throttle_req = 0;
+	spin_unlock_irq(&acm->read_lock);
+
 	if (acm_submit_read_urbs(acm, GFP_KERNEL))
 		goto error_submit_read_urbs;
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tom Cassidy <[email protected]>

commit 19a3dd1575e954e8c004413bee3e12d3962f2525 upstream.

Add support for Sierra Wireless AirCard 320U modem

---
 drivers/usb/serial/sierra.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -304,6 +304,10 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream.

We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver.

An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver:

May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected
May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected
May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected

sysfs view of the same problem:

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/sierra
-rw-r--r-- 1 root root 4096 May 29 18:23 new_id
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/
total 0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/
total 0
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
-rw-r--r-- 1 root root 4096 May 29 18:33 new_id
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind

So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions.

This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <[email protected]>:

[11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1
[11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
[11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
[11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0
[11812.264197] USB Serial deregistering driver FTDI USB Serial Device
[11812.264865] usbcore: deregistering interface driver ftdi_sio
[11812.282180] USB Serial deregistering driver pl2303
[11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[11812.283272] usbcore: deregistering interface driver pl2303
[11812.301056] USB Serial deregistering driver generic
[11812.301186] usbcore: deregistering interface driver usbserial_generic
[11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect
[11812.301823] BUG: unable to handle kernel paging request at f8e7438c
[11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.301871] *pde = 357ef067 *pte = 00000000
[11812.301957] Oops: 0000 [#1] PREEMPT SMP
[11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303]
[11812.302008]
[11812.302019] Pid: 1323, comm: modprobe Tainted: G        W    3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J
[11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1
[11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300
[11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58
[11812.302160]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0
[11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[11812.302189] DR6: ffff0ff0 DR7: 00000400
[11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000)
[11812.302209] Stack:
[11812.302216]  f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540
[11812.302325]  f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450
[11812.302372]  f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590
[11812.302419] Call Trace:
[11812.302439]  [<c133d2c1>] usb_unbind_interface+0x51/0x190
[11812.302456]  [<c12f0344>] __device_release_driver+0x64/0xb0
[11812.302469]  [<c12f0c67>] driver_detach+0x97/0xa0
[11812.302483]  [<c12f001c>] bus_remove_driver+0x6c/0xe0
[11812.302500]  [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140
[11812.302514]  [<c12f0ff9>] driver_unregister+0x49/0x80
[11812.302528]  [<c1457df6>] ? printk+0x1d/0x1f
[11812.302540]  [<c133c50d>] usb_deregister+0x5d/0xb0
[11812.302557]  [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial]
[11812.302575]  [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial]
[11812.302593]  [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial]
[11812.302611]  [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial]
[11812.302716]  [<c1080b48>] sys_delete_module+0x158/0x260
[11812.302730]  [<c110594e>] ? mntput+0x1e/0x30
[11812.302746]  [<c145c3c3>] ? sysenter_exit+0xf/0x18
[11812.302746]  [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170
[11812.302746]  [<c145c390>] sysenter_do_call+0x12/0x36
[11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f
[11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58
[11812.302746] CR2: 00000000f8e7438c

Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use.

---
 drivers/usb/serial/usb-serial.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -670,12 +670,14 @@ exit:
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
-	const struct usb_device_id *id;
+	const struct usb_device_id *id = NULL;
 	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
 
 	/* Check if the usb id matches a known device */
 	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
-		id = get_iface_id(drv, iface);
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
 		if (id)
 			return drv;
 	}

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Mack <[email protected]>

commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream.

TEAC's UD-H01 (and probably other devices) have a gap in the interface number allocation of their descriptors:

Configuration Descriptor:

    bLength                 9
    bDescriptorType         2
    wTotalLength          220
    bNumInterfaces          3
    [...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      [...]
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          1 Audio
      bFunctionSubClass       0
      bFunctionProtocol      32
      iFunction               4
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      [...]

Once a configuration is selected, usb_set_configuration() walks the known interfaces of a given configuration and calls find_iad() on each of them to set the interface association pointer the interface is included in.

The problem here is that the loop variable is taken for the interface number in the comparison logic that gathers the association. Which is fine as long as the descriptors are sane.

In the case above, however, the logic gets out of sync and the interface association fields of all interfaces beyond the interface number gap are wrong.

Fix this by passing the interface's bInterfaceNumber to find_iad() instead.

---
 drivers/usb/core/message.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1803,7 +1803,6 @@ free_interfaces:
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
-		intf->intf_assoc = find_iad(dev, cp, i);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);

@@ -1816,6 +1815,8 @@ free_interfaces:
 		if (!alt)
 			alt = &intf->altsetting[0];
 
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
 		intf->cur_altsetting = alt;
 		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Brown <[email protected]>

commit 433897f7408b556f7dfbb98c94deea02e634d2a7 upstream.

We no longer have a flat ASoC cache so can't peer directly into the array any more but should instead use the register I/O functions to update the cache.

---
 sound/soc/codecs/wm8904.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

@@ -2084,7 +2084,6 @@ static int wm8904_probe(struct snd_soc_c
 {
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 	struct wm8904_pdata *pdata = wm8904->pdata;
-	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	codec->cache_sync = 1;

@@ -2180,14 +2179,18 @@ static int wm8904_probe(struct snd_soc_c
 			if (!pdata->gpio_cfg[i])
 				continue;
 
-			reg_cache[WM8904_GPIO_CONTROL_1 + i]
-				= pdata->gpio_cfg[i] & 0xffff;
+			regmap_update_bits(wm8904->regmap,
+					   WM8904_GPIO_CONTROL_1 + i,
+					   0xffff,
+					   pdata->gpio_cfg[i]);
 		}
 
 		/* Zero is the default value for these anyway */
 		for (i = 0; i < WM8904_MIC_REGS; i++)
-			reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
-				= pdata->mic_cfg[i];
+			regmap_update_bits(wm8904->regmap,
+					   WM8904_MIC_BIAS_CONTROL_0 + i,
+					   0xffff,
+					   pdata->mic_cfg[i]);
 	}
 
 	/* Set Class W by default - this will be managed by the Class

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <[email protected]>

commit c475c06f4bb689d6ad87d7512e036d6dface3160 upstream.

Brown paper bag: Data valid is LSB of the ISR (status register), and NOT of ODATA (current random data word)!

With this, rngtest is a lot happier. Before:

rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 3
rngtest: FIPS 140-2 failures: 997
rngtest: FIPS 140-2(2001-10-10) Monobit: 604
rngtest: FIPS 140-2(2001-10-10) Poker: 996
rngtest: FIPS 140-2(2001-10-10) Runs: 36
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 117
rngtest: input channel speed: (min=622.371; avg=23682.481; max=28224.350)Kibitss
rngtest: FIPS tests speed: (min=12.361; avg=12.718; max=12.861)Mibits/s
rngtest: Program run time: 2331696 microsecondsx

After:
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 999
rngtest: FIPS 140-2 failures: 1
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.363; avg=43588.270; max=47870.711)Kibitss
rngtest: FIPS tests speed: (min=11.943; avg=12.716; max=12.844)Mibits/s
rngtest: Program run time: 1955282 microseconds

---
 drivers/char/hw_random/atmel-rng.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -34,7 +34,7 @@ static int atmel_trng_read(struct hwrng
 	u32 *data = buf;
 
 	/* data ready? */
-	if (readl(trng->base + TRNG_ODATA) & 1) {
+	if (readl(trng->base + TRNG_ISR) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
 		/*
 		  ensure data ready is only set again AFTER the next data

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Gong <[email protected]>

commit e35fca4791fcdd43dc1fd769797df40c562ab491 upstream.

Some edac drivers register themselves as mce decoders via notifier_chain. But in current notifier_chain implementation logic, it doesn't accept same notifier registered twice. If so, it will be wrong when adding/removing the element from the list. For example, on one SandyBridge platform, remove module sb_edac and then trigger one error, it will hit oops because it has no mce decoder registered but related notifier_chain still points to an invalid callback function. Here is an example:

Call Trace:
 [<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
 [<ffffffff8102b936>] mce_log+0x46/0x180
 [<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
 [<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
 [<ffffffff812e2066>] ghes_proc+0x46/0x70
 [<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
 [<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
 [<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
 [<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
 [<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
 [<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
 [<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
 [<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
 [<ffffffff81069dc2>] process_one_work+0x132/0x450
 [<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
 [<ffffffff8106ba50>] ? manage_workers+0x120/0x120
 [<ffffffff81070aee>] kthread+0x9e/0xb0
 [<ffffffff81514724>] kernel_thread_helper+0x4/0x10
 [<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41

0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b 79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41 RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
RSP <ffff88042868fb20>
CR2: ffffffffa01af838

---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP

Only i7core_edac and sb_edac have such issues because they have more than one memory controller which means they have to register mce decoder many times.

---
 drivers/edac/i7core_edac.c |   15 ++++-----------
 drivers/edac/sb_edac.c     |    8 ++++----
 2 files changed, 8 insertions(+), 15 deletions(-)

@@ -1932,12 +1932,6 @@ static int i7core_mce_check_error(struct
 	if (mce->bank != 8)
 		return NOTIFY_DONE;
 
-#ifdef CONFIG_SMP
-	/* Only handle if it is the right mc controller */
-	if (mce->socketid != pvt->i7core_dev->socket)
-		return NOTIFY_DONE;
-#endif
-
 	smp_rmb();
 	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
 		smp_wmb();

@@ -2234,8 +2228,6 @@ static void i7core_unregister_mci(struct
 	if (pvt->enable_scrub)
 		disable_sdram_scrub_setting(mci);
 
-	mce_unregister_decode_chain(&i7_mce_dec);
-
 	/* Disable EDAC polling */
 	i7core_pci_ctl_release(pvt);
 

@@ -2336,8 +2328,6 @@ static int i7core_register_mci(struct i7
 	/* DCLK for scrub rate setting */
 	pvt->dclk_freq = get_dclk_freq();
 
-	mce_register_decode_chain(&i7_mce_dec);
-
 	return 0;
 
 fail0:

@@ -2481,8 +2471,10 @@ static int __init i7core_init(void)
 
 	pci_rc = pci_register_driver(&i7core_driver);
 
-	if (pci_rc >= 0)
+	if (pci_rc >= 0) {
+		mce_register_decode_chain(&i7_mce_dec);
 		return 0;
+	}
 
 	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
 		      pci_rc);

@@ -2498,6 +2490,7 @@ static void __exit i7core_exit(void)
 {
 	debugf2("MC: " __FILE__ ": %s()\n", __func__);
 	pci_unregister_driver(&i7core_driver);
+	mce_unregister_decode_chain(&i7_mce_dec);
 }
 
 module_init(i7core_init);

@@ -1669,8 +1669,6 @@ static void sbridge_unregister_mci(struc
 	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
 		__func__, mci, &sbridge_dev->pdev[0]->dev);
 
-	mce_unregister_decode_chain(&sbridge_mce_dec);
-
 	/* Remove MC sysfs nodes */
 	edac_mc_del_mc(mci->dev);
 

@@ -1738,7 +1736,6 @@ static int sbridge_register_mci(struct s
 		goto fail0;
 	}
 
-	mce_register_decode_chain(&sbridge_mce_dec);
 	return 0;
 
 fail0:

@@ -1867,8 +1864,10 @@ static int __init sbridge_init(void)
 
 	pci_rc = pci_register_driver(&sbridge_driver);
 
-	if (pci_rc >= 0)
+	if (pci_rc >= 0) {
+		mce_register_decode_chain(&sbridge_mce_dec);
 		return 0;
+	}
 
 	sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
 		      pci_rc);

@@ -1884,6 +1883,7 @@ static void __exit sbridge_exit(void)
 {
 	debugf2("MC: " __FILE__ ": %s()\n", __func__);
 	pci_unregister_driver(&sbridge_driver);
+	mce_unregister_decode_chain(&sbridge_mce_dec);
 }
 
 module_init(sbridge_init);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Gong <[email protected]>

commit 2cbb587d3bc41a305168e91b4f3c5b6944a12566 upstream.

On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).

---
 drivers/edac/sb_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -599,7 +599,7 @@ static int get_dimm_config(const struct
 		pvt->is_close_pg = false;
 	}
 
-	pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, &reg);
+	pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, &reg);
 	if (IS_RDIMM_ENABLED(reg)) {
 		/* FIXME: Can also be LRDIMM */
 		debugf0("Memory is registered\n");

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sasha Levin <[email protected]>

commit 5fcb08befaf57faa1b00e514915c1660252b8c26 upstream.

The BUG_ON() in pack_sg_list() would get triggered only one time after we've corrupted some memory by sg_set_buf() into an invalid sg buffer.

I'm still working on figuring out why I manage to trigger that bug...

---
 net/9p/trans_virtio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -192,10 +192,10 @@ static int pack_sg_list(struct scatterli
 		s = rest_of_page(data);
 		if (s > count)
 			s = count;
+		BUG_ON(index > limit);
 		sg_set_buf(&sg[index++], data, s);
 		count -= s;
 		data += s;
-		BUG_ON(index > limit);
 	}
 
 	return index-start;

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ohad Ben-Cohen <[email protected]>

commit 6b03976288538a94e072bbfcd12d69a20daea8aa upstream.

For some reason one of the dev_err invocations is using a wrong device so fix that.

---
 drivers/remoteproc/omap_remoteproc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -182,7 +182,7 @@ static int __devinit omap_rproc_probe(st
 
 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret) {
-		dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+		dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
 		return ret;
 	}
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sjur Brændeland <[email protected]>

commit e981f6d41acda2ae8c05e60feb2cb97772b4a6e6 upstream.

Fix compile warnings from GCC 4.6.1 when printing values of type size_t.

drivers/remoteproc/remoteproc_core.c:251:6:
warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat] drivers/remoteproc/remoteproc_core.c:938:9:
warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘size_t’ [-Wformat] drivers/remoteproc/remoteproc_core.c:1023:2:
warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat]

---
 drivers/remoteproc/remoteproc_core.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -247,7 +247,7 @@ rproc_load_segments(struct rproc *rproc,
 		}
 
 		if (offset + filesz > len) {
-			dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+			dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
 					offset + filesz, len);
 			ret = -EINVAL;
 			break;

@@ -934,7 +934,7 @@ static void rproc_resource_cleanup(struc
 		unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
 		if (unmapped != entry->len) {
 			/* nothing much to do besides complaining */
-			dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+			dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
 								unmapped);
 		}
 

@@ -1020,7 +1020,7 @@ static int rproc_fw_boot(struct rproc *r
 
 	ehdr = (struct elf32_hdr *)fw->data;
 
-	dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+	dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
 
 	/*
 	 * if enabling an IOMMU isn't relevant for this rproc, this is

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sjur Brændeland <[email protected]>

commit 30338cf09f82523d8747670f7363cc8af347c79f upstream.

If rproc_find_rsc_table() fails, rproc_fw_boot() must set return-value before jumping to clean_up label. Otherwise no error value is returned.

---
 drivers/remoteproc/remoteproc_core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -1041,8 +1041,10 @@ static int rproc_fw_boot(struct rproc *r
 
 	/* look for the resource table */
 	table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
-	if (!table)
+	if (!table) {
+		ret = -EINVAL;
 		goto clean_up;
+	}
 
 	/* handle fw resources which are required to boot rproc */
 	ret = rproc_handle_boot_rsc(rproc, table, tablesz);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Boot <[email protected]>

commit d4a4206ebbaf48b55803a7eb34e330530d83a889 upstream.

ASPM on the 82574 causes trouble. Currently the driver disables L0s for this NIC but only disables L1 if the MTU is >1500. This patch simply causes L1 to be disabled regardless of the MTU setting.

---
 drivers/net/ethernet/intel/e1000e/82571.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -2061,8 +2061,9 @@ const struct e1000_info e1000_82574_info
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
-	.flags2			  = FLAG2_CHECK_PHY_HANG
+	.flags2			= FLAG2_CHECK_PHY_HANG
 				  | FLAG2_DISABLE_ASPM_L0S
+				  | FLAG2_DISABLE_ASPM_L1
 				  | FLAG2_NO_DISABLE_RX,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Boot <[email protected]>

commit 59aed95263bdd0e2b48eb9be5a94346d2d4abf90 upstream.

For the 82573, ASPM L1 gets disabled wholesale so this special-case code is not required. For the 82574 the previous patch does the same as for the 82573, disabling L1 on the adapter. Thus, this code is no longer required and can be removed.

---
 drivers/net/ethernet/intel/e1000e/netdev.c |    8 --------
 1 file changed, 8 deletions(-)

@@ -5293,14 +5293,6 @@ static int e1000_change_mtu(struct net_d
 		return -EINVAL;
 	}
 
-	/* 82573 Errata 17 */
-	if (((adapter->hw.mac.type == e1000_82573) ||
-	     (adapter->hw.mac.type == e1000_82574)) &&
-	    (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
-		adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
-		e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
-	}
-
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Richard Cochran <[email protected]>

commit dd48d708ff3e917f6d6b6c2b696c3f18c019feed upstream.

When repeating a UTC time value during a leap second (when the UTC time should be 23:59:60), the TAI timescale should not stop. The kernel NTP code increments the TAI offset one second too late. This patch fixes the issue by incrementing the offset during the leap second itself.

---
 kernel/time/ntp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -412,6 +412,7 @@ int second_overflow(unsigned long secs)
 		if (secs % 86400 == 0) {
 			leap = -1;
 			time_state = TIME_OOP;
+			time_tai++;
 			printk(KERN_NOTICE
 				"Clock: inserting leap second 23:59:60 UTC\n");
 		}

@@ -426,7 +427,6 @@ int second_overflow(unsigned long secs)
 		}
 		break;
 	case TIME_OOP:
-		time_tai++;
 		time_state = TIME_WAIT;
 		break;
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <[email protected]>

commit ebed633c61c023e5d1aa4ed159cd67406e9e37c2 upstream.

The logic that allows to have a short TFD queue was completely wrong. We do maintain 256 Transmit Frame Descriptors, but they point to recycled buffers. We used to attach and de-attach different TFDs for the same buffer and it worked since they pointed to the same buffer.

Also zero the number of BDs after unmapping a TFD. This seems not necessary since we don't reclaim the same TFD twice, but I like housekeeping.

This patch solves this warning:

[ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0()
[ 6427.079859] Hardware name: Latitude E6410
[ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes]
[ 6427.079870] Modules linked in: ...
[ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G           O 3.3.3 #5
[ 6427.079954] Call Trace:
[ 6427.079963]  [<c10337a2>] warn_slowpath_common+0x72/0xa0
[ 6427.079982]  [<c1033873>] warn_slowpath_fmt+0x33/0x40
[ 6427.079988]  [<c12dcb77>] check_unmap+0x727/0x7a0
[ 6427.079995]  [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80
[ 6427.080024]  [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi]
[ 6427.080048]  [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi]
[ 6427.080071]  [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi]
[ 6427.080095]  [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi]
[ 6427.080113]  [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi]
[ 6427.080132]  [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi]
[ 6427.080168]  [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211]
[ 6427.080198]  [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211]
[ 6427.080243]  [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211]
[ 6427.080250]  [<c148dac1>] __dev_close_many+0x81/0xd0
[ 6427.080270]  [<c148db3d>] __dev_close+0x2d/0x50
[ 6427.080276]  [<c148d152>] __dev_change_flags+0x82/0x150
[ 6427.080282]  [<c148e3e3>] dev_change_flags+0x23/0x60
[ 6427.080289]  [<c14f6320>] devinet_ioctl+0x6a0/0x770
[ 6427.080296]  [<c14f8705>] inet_ioctl+0x95/0xb0
[ 6427.080304]  [<c147a0f0>] sock_ioctl+0x70/0x270

---
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h |    2 +-
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c  |   20 +++++++++++++-------
 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c     |    4 +---
 3 files changed, 15 insertions(+), 11 deletions(-)

@@ -342,7 +342,7 @@ void iwl_trans_pcie_tx_agg_setup(struct
 				 enum iwl_rxon_context_id ctx,
 				 int sta_id, int tid, int frame_limit, u16 ssn);
 void iwlagn_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq,
-	int index, enum dma_data_direction dma_dir);
+			 enum dma_data_direction dma_dir);
 int iwl_tx_queue_reclaim(struct iwl_trans *trans, int txq_id, int index,
 			 struct sk_buff_head *skbs);
 int iwl_queue_space(const struct iwl_queue *q);

@@ -237,32 +237,38 @@ static void iwlagn_unmap_tfd(struct iwl_
 	for (i = 1; i < num_tbs; i++)
 		dma_unmap_single(trans->dev, iwl_tfd_tb_get_addr(tfd, i),
 				iwl_tfd_tb_get_len(tfd, i), dma_dir);
+
+	tfd->num_tbs = 0;
 }
 
 /**
  * iwlagn_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
  * @trans - transport private data
  * @txq - tx queue
- * @index - the index of the TFD to be freed
- *@dma_dir - the direction of the DMA mapping
+ * @dma_dir - the direction of the DMA mapping
  *
  * Does NOT advance any TFD circular buffer read/write indexes
  * Does NOT free the TFD itself (which is within circular buffer)
  */
 void iwlagn_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq,
-	int index, enum dma_data_direction dma_dir)
+			 enum dma_data_direction dma_dir)
 {
 	struct iwl_tfd *tfd_tmp = txq->tfds;
 
+	/* rd_ptr is bounded by n_bd and idx is bounded by n_window */
+	int rd_ptr = txq->q.read_ptr;
+	int idx = get_cmd_index(&txq->q, rd_ptr);
+
 	lockdep_assert_held(&txq->lock);
 
-	iwlagn_unmap_tfd(trans, &txq->meta[index], &tfd_tmp[index], dma_dir);
+	/* We have only q->n_window txq->entries, but we use q->n_bd tfds */
+	iwlagn_unmap_tfd(trans, &txq->meta[idx], &tfd_tmp[rd_ptr], dma_dir);
 
 	/* free SKB */
 	if (txq->skbs) {
 		struct sk_buff *skb;
 
-		skb = txq->skbs[index];
+		skb = txq->skbs[idx];
 
 		/* Can be called from irqs-disabled context
 		 * If skb is not NULL, it means that the whole queue is being

@@ -270,7 +276,7 @@ void iwlagn_txq_free_tfd(struct iwl_tran
 		 */
 		if (skb) {
 			iwl_op_mode_free_skb(trans->op_mode, skb);
-			txq->skbs[index] = NULL;
+			txq->skbs[idx] = NULL;
 		}
 	}
 }

@@ -1100,7 +1106,7 @@ int iwl_tx_queue_reclaim(struct iwl_tran
 
 		iwlagn_txq_inval_byte_cnt_tbl(trans, txq);
 
-		iwlagn_txq_free_tfd(trans, txq, txq->q.read_ptr, DMA_TO_DEVICE);
+		iwlagn_txq_free_tfd(trans, txq, DMA_TO_DEVICE);
 		freed++;
 	}
 	return freed;

@@ -430,9 +430,7 @@ static void iwl_tx_queue_unmap(struct iw
 
 	spin_lock_bh(&txq->lock);
 	while (q->write_ptr != q->read_ptr) {
-		/* The read_ptr needs to bound by q->n_window */
-		iwlagn_txq_free_tfd(trans, txq, get_cmd_index(q, q->read_ptr),
-				    dma_dir);
+		iwlagn_txq_free_tfd(trans, txq, dma_dir);
 		q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
 	}
 	spin_unlock_bh(&txq->lock);

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Meenakshi Venkataraman <[email protected]>

commit d2c8b15d0cb486f4938ba7f2af349d9d1220cb10 upstream.

My patch

iwlwifi: use correct released ucode version

did not correctly report supported firmware
for the 6035 device. This patch fixes it. The
minimum supported firmware version for 6035
is v6.

Also correct the minimum supported firmware
version for the 6000g2 series of devices.

---
 drivers/net/wireless/iwlwifi/iwl-6000.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

@@ -49,17 +49,20 @@
 #define IWL6000_UCODE_API_MAX 6
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
 
 /* Oldest version we won't warn about */
 #define IWL6000_UCODE_API_OK 4
 #define IWL6000G2_UCODE_API_OK 5
 #define IWL6050_UCODE_API_OK 5
 #define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"

@@ -425,9 +428,25 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
 	IWL_DEVICE_6030,
 };
 
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.lib = &iwl6030_lib,					\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
 const struct iwl_cfg iwl6035_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
-	IWL_DEVICE_6030,
+	IWL_DEVICE_6035,
 	.ht_params = &iwl6000_ht_params,
 };
 

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

commit a5fdde28b4f5fb756032e7ad2c6fcdcffde20958 upstream.

Since my commit
iwlwifi: use valid TX/RX antenna from hw_params
the config values are pure overrides, not the
real values for all hardware. Therefore, the
EEPROM TX power reading code checks the wrong
values, it should check the hw_params values.

---
 drivers/net/wireless/iwlwifi/iwl-eeprom.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

@@ -513,28 +513,28 @@ static int iwl_find_otp_image(struct iwl
  * iwl_get_max_txpower_avg - get the highest tx power from all chains.
  *     find the highest tx power from all chains for the channel
  */
-static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg,
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
 		int element, s8 *max_txpower_in_half_dbm)
 {
 	s8 max_txpower_avg = 0; /* (dBm) */
 
 	/* Take the highest tx power from any valid chains */
-	if ((cfg->valid_tx_ant & ANT_A) &&
+	if ((hw_params(priv).valid_tx_ant & ANT_A) &&
 	    (enhanced_txpower[element].chain_a_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_a_max;
-	if ((cfg->valid_tx_ant & ANT_B) &&
+	if ((hw_params(priv).valid_tx_ant & ANT_B) &&
 	    (enhanced_txpower[element].chain_b_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_b_max;
-	if ((cfg->valid_tx_ant & ANT_C) &&
+	if ((hw_params(priv).valid_tx_ant & ANT_C) &&
 	    (enhanced_txpower[element].chain_c_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].chain_c_max;
-	if (((cfg->valid_tx_ant == ANT_AB) |
-	    (cfg->valid_tx_ant == ANT_BC) |
-	    (cfg->valid_tx_ant == ANT_AC)) &&
+	if (((hw_params(priv).valid_tx_ant == ANT_AB) |
+	    (hw_params(priv).valid_tx_ant == ANT_BC) |
+	    (hw_params(priv).valid_tx_ant == ANT_AC)) &&
 	    (enhanced_txpower[element].mimo2_max > max_txpower_avg))
 		max_txpower_avg =  enhanced_txpower[element].mimo2_max;
-	if ((cfg->valid_tx_ant == ANT_ABC) &&
+	if ((hw_params(priv).valid_tx_ant == ANT_ABC) &&
 	    (enhanced_txpower[element].mimo3_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].mimo3_max;
 

@@ -637,7 +637,7 @@ static void iwl_eeprom_enhanced_txpower(
 				 ((txp->delta_20_in_40 & 0xf0) >> 4),
 				 (txp->delta_20_in_40 & 0x0f));
 
-		max_txp_avg = iwl_get_max_txpower_avg(cfg(priv), txp_array, idx,
+		max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
 						      &max_txp_avg_halfdbm);
 
 		/*

3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Dreier <[email protected]>

commit 59e4f541baf728dbb426949bfa9f6862387ffd0e upstream.

The error paths in target_emulate_set_target_port_groups() are all essentially "rc = -EINVAL; goto out;" but the code at "out:" ignores rc and always returns success. This means that even if eg explicit ALUA is turned off, the initiator will always see a good SCSI status for SET TARGET PORT GROUPS.

Fix this by returning rc as is intended. It appears this bug was added by the following patch:

commit 05d1c7c0d0db4cc25548d9aadebb416888a82327

Author: Andy Grover <[email protected]>
Date:   Wed Jul 20 19:13:28 2011 +0000

target: Make all control CDBs scatter-gather

[bwh: Backported to 3.2: we have transport_complete_task()
and not target_complete_cmd()]

---
 drivers/target/target_core_alua.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

@@ -351,9 +351,11 @@ int target_emulate_set_target_port_group
 
 out:
 	transport_kunmap_data_sg(cmd);
-	task->task_scsi_status = GOOD;
-	transport_complete_task(task, 1);
-	return 0;
+	if (!rc) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return rc;
 }
 
 static inline int core_alua_state_nonoptimized(